Siemens OpenStage 60 G Operation & User’s Manual

Individual phone configuration 112 Setting the fade time for the screensaver Set the intervals at which the screensaver images change here. The following fade times are possible: • 5 seconds • 10 seconds • 20 seconds • 30 seconds • 60 seconds v Press the key shown until the application’s "Settings" tab is active. poss. j Enter and confirm the user password. Select and confirm the option shown. Select and confirm the option shown. Select and confirm the option shown. Select and confirm the option shown. Select and confirm the fade time in the context menu. Select and co ...

Language settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Selecting the language for graphic display user prompts . . . . . . . 109 Setting the country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Graphic display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Activating the screensaver. . . . . . . . . . ...

55 Step by Step Enhanced phone functions Incoming calls Rejecting a call You can reject an incoming call. In the pop-up menu: Select and confirm the option shown. The caller hears a busy signal. Deflecting a call Using call deflection Prerequisite: An incoming call is displayed or signaled. In the pop-up menu: Select and confirm the option shown. The call is immediately deflected if a destination phone number is programmed � page 56. or If you did not set a phone number when programming call deflection, a pop-up menu appears prompting you to enter a destination phone ...

63 Step by Step If the party answers: Announce the call you want to transfer. Select and confirm the option shown in the connections’s context menu. If the party does not answer: You do not have to wait for the second party to answer before you can transfer the call. Replace the handset or, if speakerphone mode is active, press the lit n key to transfer the call. If the party does not answer, you will be called back by the first party. Allowing call transfer v Press the key shown until the application’s "Settings" tab is active. poss. j Enter and confirm the user p ...

HiPath 8000 functions 96 Call forwarding don’t answer With Call forwarding don’t answer (CFDA), you can use a feature code to activate call forwarding to another number if the handset is not picked up after a certain number of rings (2 to 7). You can use the feature code to activate/deactivate this function and define a forwarding destination. Activating ^ Lift the handset. j Enter the code, for example *92 (contact your service personnel) or if you also want to set the forwarding destination j enter the code with a phone number, for example *901234567 to deactivate call forwa ...

Making and receiving calls using multi-line phones 72 Incoming calls Depending on your individual settings, you will be noti- fied of incoming calls � page 118. Accepting calls for the primary line In this case, the telephone behaves in the same way as a single-line telephone � page 36 and � page 55. Accepting calls for secondary lines Prerequisite: The secondary line is configured on your multi-line telephone. Using the handset ^ Lift the handset. [ Conduct call. Using the line keys T Press the blinking line key. Speakerphone mode. Using the menu t Press the key shown until ...