Siemens MICROMASTER 440 Quick Start Manual

1 www . ElectricalPartManuals . com ...

MICROMASTER 440 6SE6400-5GA00-0BP0 Getting Started Guide Is for quick commissioning with SDP and BOP. Part Number 6SE6400-5AD00-1AP0 Start-Up Guide Gives basic information necessary for mechanical installation, quick commissioning, Analog and Digital I/O settings, common applications with examples and troubleshooting – speci ...

3 MICROMASTER 440 1/6 HP – 350 HP Quick Start Guide User Documentation Valid for Issue 05/04 Inverter Type Software Version MICROMASTER 440 2.0x 1/6 HP – 350 HP Mechanical Installation 1 Wiring Guidelines / Electrical Installation 2 50Hz / 60Hz Switch 3 Control Wiring Information 4 Paramete ...

MICROMASTER 440 6SE6400-5GA00-0BP0 IMPORTANT NOTICE All MM440s are UL approved UL listing can be determined by examining the inverter’s Rating Label. For UL listed products the following UL mark is used: Operation with 1-ph 230V AC line With the SW 2.08 and higher it is possible to supply the inverter 3 AC 200 V- 240V also ...

5 Definitions and Warnings DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury CAUTION used with the safety alert symb ...

MICROMASTER 440 6SE6400-5GA00-0BP0 Safety Instructions The following Warnings, Cautions and Notes are provided for your safety and as a means of preventing damage to the product or components in the machines connected. This section lists Warnings, Cautions and Notes, which apply generally when handling MICROMASTER 440 Inverter ...

7 NOTICE • Keep these operating instructions within easy reach of the equipment and make them available to all users • Whenever measuring or testing has to be performed on live equipment, the regulations of Safety Code BGV A2 must be observed, in particular §8 “Permissible Deviations whe ...

MICROMASTER 440 6SE6400-5GA00-0BP0 Operation WARNING • MICROMASTERS operate at high voltages. • When operating electrical devices, it is impossible to avoid applying hazardous voltages to certain parts of the equipment. • Emergency Stop facilities according to EN 60204 IEC 204 (VDE 0113) must remain operative in all oper ...

9 Table of Contents 1 Mechanical Installation .......................................................................................... 11 1.1 Drilling Patterns and Dimensions....................................................................... 11 1.2 Environment, Heat Loss and Air Flow .... ...

MICROMASTER 440 6SE6400-5GA00-0BP0 www . ElectricalPartManuals . com ...