Shenzhen HS70 Manual 

TABLE OF CONTENTS Important safety instruction........................................................................................ Product description.................................................................................................... Connect cable............................................................................................................ The IR Remote Control............................................................................................... Touch menu............................................................................................................... Setup menu............................................................................................................... Preparation before operation...................................................................................... Specifications........................................................................................................... Compatible disk types................................................................................................ How to deal with disc.................................................................................................. 1 2 3 4 5 7 17 18 19 20

watching DVD's or listening to your favorite music. Personal Safety has been taken in consideration in the design and manufacturing this product, however any improper use or operation may result in an electrical shock, fire and/or any other hazards. To prevent these hazards it is strongly recommended to read this manual thoroughly and adhere to the following precautions: Important Safety Instructions Important Safety Instructions NOTE - Please dispose empty batteries according the regulations in your country - All On Screen Displays (OSD) and Pictures will be based on the English version. - Design and Specifications may vary in the manual from the actual product in use. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintena- nce (servicing) instructions in the literature accompanying the applia- nce. The unit employs a laser system. To ensure proper use of this product. Please read this owner s manual carefully and retain for future reference. Should the require maintenance, contact an authorized service location-see ser- vice procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation may be present when the enclosure is opened. Do not stare into beam. CAUTION: WARNING: FCC regulations state that any change or modification to the equipment, not expressly approved by maker or its authorized parties, could void user's authority to operate this equipment. 20 1 Attention: Do not write on the unlabeled side of the disc. Do not use chemical solutions to clean the DVD disc. Do not stick labels or glue-based notes on the disc. Do not use disks with glue residue or damaged labels. Do not use anti-scratchingmaterials or covers, that were not designed for this machine. Do not put or store disk in the following environments: Directly under the sunlight, in moist or dusty environments or beside heating elements. How to hold disc Do not touch the unlabeled side of the disc.. When there are stains on face of disc Wipe gently with a wet cloth and then with dry one. When a disc is brought in from a cold environment to a hot one, condensation can form on the face of the disc. Wipe down with a soft, smooth, dry cloth before using. How to deal with disc Load one disc with the data side facing upwards and make sure you do not touch the data side with your fingers. Disc loading Once the disc is loaded, the unit will automatically start reading the disk and it will take a few seconds to download the disc initial data, thereafter the disc type will be displayed in the left upper corner of the LCD screen and the unit will start playing the disc. EJECT

when the machine have electric, it as red light,playing it turn off (3) (8)Infra-Red Audio transmitter: 2.3MHz/2.8MHz &3.2MHz/3.8MHz (4) DVD (5) LCD screen (6)EJECT (7)SD Card 2 1 3 4 5 2 1 3 4 (1) Power (2) Indicator light when the machine have electric, it as red light,playing it turn off (3) (8)Infra-Red Audio transmitter: 2.3MHz/2.8MHz &3.2MHz/3.8MHz (4) LCD screen EJECT 5 6 HS70D HS70 COMPATIBLE DISK TYPES COMPATIBLE DISK TYPES Some DVD discs may have special requirements for playing, with which this system may not be compatible. Please refer to the specifications on the individual disc. About 700MB - 300 minutes DISC TYPE DVD CD-DA MP3 Content Size Total Play time About 4.7 GB - 2hrs. (Single side & single layer) About 8.5 GB - 4hrs. (Single side & double layer) About 9.4 GB - 4hrs. (Double side & Single layer) AUDIO/ VIDEO 12CM About 17GB - 8hrs. (Double side & double layer) AUDIO 12CM About 700MB - 74 minutes MP3 AUDIO 12CM Discs types The Multimedia Player can play the following types of discs: DVD / CD / CD-R / CD-RW / DVD-R / DVD-RW / DVD+R / DVD+RW. Discs other than listed above cannot be played. Please do NOT play discs smaller than 12CM or of odd shapes, only play sound 12CM discs. The Multimedia Player uses the NTSC/PAL color systems. It cannot play discs recorded with other systems, such as SECAM. Region code The region code for this player is 0 which indicate any region. Copyright According to the related laws, DVD discs, without proper authorization, are not allowed to be copied, broadcasted, cable broadcasted, or played publicly with the Multimedia Player. The Multimedia Player incorporates copyright protection technology that is protected by method of claims of certain U.S. patents and other intellectual Property Rights owned by their rights owners. Reverse engineering or disassembly is prohibited. PRODUCT DESCRIPTION 2 19

vehicle . This is illegal in most states. CHECK with your local law enforcement officials for details . 2. Always check polarity when connecting wire to avoid damage to the unit and /or vehicle. 3. Do not open the housing of the monitor ,Servicing must be done at our factory by authorized technicians to maintain the warranty. Specifications System Power Input/Consumption Video Input Operating Temperature Storage Temperature Screen Size(Diagonal) Display Method Resolution(Dot) Back Light Viewing Area Viewing Angle Monitor Overall Dimension Monitor Weight The Specifications are subject to change without prior notice NTSC/PAL Auto Switch DC(10.8~16V) 10% ,<700mA Composite Video Signal 1Vp-p 75Ohm -30 ~+85 -40 ~+65 7.0 TFT Active Matrix System 1440x234 CCFL 154.08(W)x86.58(H)mm Left ,Right:65 Top:50 ,Down:65 182(W)x123(H)x23(D)mm <1kg CONNECT CABLE DVD AV box V L R EXTERNAL AV INPUT V L R DRIVER MONITOR AV OUTPUT V L R PASSENGER MONITOR AV OUTPUT ANT POWER SPECIFICATIONS CONNECT CABLE 3 18 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help

Point the remote control no more than about 3~4 meters (approx. 21 feet) from the remote control sensor on the front of the player and keep with in a 30 angle. (1) Adjust Decrease (2) Adjust Increase (3) Title (4) SD (5) Number buttons (6) Clear (7) Slow (8) Program (9) Mute (10) Repeat (11) Zoom (12) play/pause (13) Right Arrow (14) Stop&Return (15) Fast Reverse (16) Fast Forward (17) Previous (18) Next (19) Monitor Menu (20) Power (21) Menu/PBC (22) Source (23)Subtitle (24)Display (25) Audio (26) ANGLE (27) Up Arrow (28) Setup (29) Enter (30) Left Arrow (31) Down Arrow (32) Volume- (33) Volume+ CLEAR CLEAR DISPLAY DISPLAY SUBTITLE SUBTITLE SLOW SLOW PROGRAM PROGRAM ANGLE ANGLE AUDIO AUDIO MUTE MUTE REPEAT REPEAT POWER POWER CTRL CTRL MONITOR MENU MONITOR MENU SOURCE SOURCE MENU PBC MENU PBC TITLE TITLE SD SD 1 4 3 2 5 8 7 6 10+ 1 /0 0 9 ENTER ENTER SETUP SETUP ZOOM ZOOM + _ V O L V O L 1 1 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 25 25 29 29 30 30 31 31 32 32 33 33 2 2 PackageContents REMOTE CONTROL (1) AUDIO/VIDEO CABLE (1) OWNERS MANUAL (1) AV BOX(1) Check for the following accessories: CLEAR CLEAR DISPLAY DISPLAY SUBTITLE SUBTITLE SLOW SLOW PROGRAM PROGRAM USB/SD USB/SD AUDIO AUDIO MUTE MUTE REPEAT REPEAT POWER POWER CTRL CTRL MONITOR MENU MONITOR MENU SOURCE SOURCE MENU PBC MENU PBC TITLE TITLE EJECT EJECT 1 4 3 2 5 8 7 6 10+ 1 /0 0 9 ENTER ENTER SETUP SETUP ZOOM ZOOM + _ V O L V O L FM FM CONNECT CABLE (2) THE IR REMOTE CONTROL PACKAGECONTENTS 4 17

press any are of the panel to power on the screen .When you touch any area of the panel, the screen will display as below: When you press MONITOR In1 on the panel, the AV source will shift to Av1 When you press MONITOR In2 on the panel, the AV source will shift to Av2 When you select TFT MENU on the panel, the screen will display as below and you can adjust the parameters at your will When you press AVSRC on the panel, the screen will display as below and you can adjust two monitor s parameters at your will Brightness 30 Saturation 30 Contrast 30 Sharpness 30 TFT MENU AV SRC FUN SETUP DVD RC Reset NO Adjust HS70D TFT MENU AV SRC FUN SETUP DVD SRC When use HS70D,press AV SRC will switch AV IN,press it again will swith DVD When you press FUN SETUP on the panel, the screen will display as below and you can adjust two monitor s parameters at your will HS70 SCREEN OFF Adjust HS70D DVD mode master FM src master FM chann 88.7 Screen auto Adjust 1) SINGLE (All the songs / videos will be played only once) 2) REPEAT ONE (The current playing song / video will be repeated) 3) REPEAT FOLDER (Only the songs / videos of the current folder will be repeated) 4) FOLDER (Only all the songs / videos of this folder will be played once) 5) SHUFFLE / RANDOM (The songs / videos will be played in random order) When the disc is playing, press REPEAT to select your repeat mode, the TV screen will show: Functions such as MUTE, VOLUME, PAUSE, PREVIOUS, NEXT, etc. are also available for MP3 / MPEG4 recorded discs. These operations are the same as playing an Audio CD. Other functions TOUCH MENU 5 16 TFT MENU AV SRC FUN SETUP TFT OFF HS70D HS70 IR Channel A Vol 40

below and you can adjust the parameters at your will. Attention:(in DVD state, this item function use to HS70D,HS70 no use) When you press TFT OFF on the panel, the screen will turn off TITLE MENU SETUP OK I<< I<< NUM VOL+ VOL- Enter the PIN numbers with the number buttons of the remote control and press PLAY, enter the new password and press PLAY again, confirm your new password and press PLAY again. Important: Do not forget the newly entered password, there is no way to retrieve the (newly) entered password. When you press DVD SRC on the panel, the screen will display as below and you can adjust the parameters at your will. Attention:(in DVD state, this item function use to HS70D,HS70 no use) When you press TFT OFF on the panel, the screen will turn off TITLE MENU SETUP OK I<< I<< NUM VOL+ VOL- Enter the PIN numbers with the number buttons of the remote control and press PLAY, enter the new password and press PLAY again, confirm your new password and press PLAY again. Important: Do not forget the newly entered password, there is no way to retrieve the (newly) entered password. EXIT SETUP MENU EXIT SETUP MENU With this selection X you exit the system setup and return to normal viewing of the video. MP3/MPEG4 PLAYBACK MP3/MPEG4 PLAYBACK The Multimedia Player is able to play discs (CD-R / CD-RW) recorded with MP3 / MPEG4 audio and video files. When a disc with MP3 or MPEG4 files (including multiple directories) is loaded in the system the following screen is displayed: To go to the preferred music or video directory, press the arrows to scroll to your selection and confirm your choice by pressing the PLAY button. To select your preferred song or video title, press the arrows to scroll to your selection and confirm your choice by pressing the PLAY button. Your selected song or video will now be played. There are four kinds of play modes available when playing MP3 / MPEG4(.AV1) recorded discs: Play mode 6 15

screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET TV DISPLAY MODE SET TV DISPLAY MODE 4:3 PANSCAN 4:3 PANSCAN 4:3 LETTERBOX 4:3 LETTERBOX 16:9 16:9 Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE" item is selected, now press PLAY. Press SETUP to exit these system settings Set TV Display mode to the correct ratio: Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc formats will display different images depending this setting and the screen size used.. Hereunder is an example of the different choices and the relation between the disc format and screen ratio. of the different choices and the relation When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET TV DISPLAY MODE SET TV DISPLAY MODE 4:3 PANSCAN 4:3 PANSCAN 4:3 LETTERBOX 4:3 LETTERBOX 16:9 16:9 Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE" item is selected, now press PLAY. Press SETUP to exit these system settings Set TV Display mode to the correct ratio: Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc formats will display different images depending this setting and the screen size used.. Hereunder is an example of the different choices and the relation between the disc format and screen ratio. of the different choices and the relation PREFERENCE PAGE PREFERENCE PAGE SET PARENTAL CONTROL SET PARENTAL CONTROL TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT 1 KIO SAF 1 KIO SAF 2 G 2 G 3 PG 3 PG 4 PG 13 4 PG 13 5 PGR 5 PGR 6 R 6 R 7 NC17 7 NC17 8 ADULT 8 ADULT Set age control grade: For DVD discs with a rating system progr -ammed (for example: the North American CARA) parents can prohibit watching con -tent that might be inadvisable for children. Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the UP or DOWN arrow to scroll to the available sel -ections. Selection 1 is Kid safe, selection 2 is some guidance advisable, selection 3 is PG (Parental guidance suggested, some material may not be suitable for children), selection 4 is PG13 (Parents strongly cau -tioned, some material may be inappropr -iate for children under 13), selection 5 is PG-R (Restricted, under 17 requires acco -mpanying parent or adult guardian), sele -ction 6 is Restricted viewing, selection 7 is NC-17 (No one 17 and under admitted), selection 8 is for Adult Entertainment or X rated movies and NO PARENTAL is for General Audiences (All Ages). Hereafter a screen will indicate to enter a password, if the ex-factory password has never been modified, you can use [123456] by pressing the according number buttons on the remote control. Select "YES" or "NO" with either the left or the right arrow key and press PLAY to confirm. When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET TV DISPLAY MODE SET TV DISPLAY MODE 4:3 PANSCAN 4:3 PANSCAN 4:3 LETTERBOX 4:3 LETTERBOX 16:9 16:9 Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE" item is selected, now press PLAY. Press SETUP to exit these system settings Set TV Display mode to the correct ratio: Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc formats will display different images depending this setting and the screen size used.. Hereunder is an example of the different choices and the relation between the disc format and screen ratio. of the different choices and the relation PREFERENCE PAGE PREFERENCE PAGE SET PARENTAL CONTROL SET PARENTAL CONTROL TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT 1 KIO SAF 1 KIO SAF 2 G 2 G 3 PG 3 PG 4 PG 13 4 PG 13 5 PGR 5 PGR 6 R 6 R 7 NC17 7 NC17 8 ADULT 8 ADULT Set age control grade: For DVD discs with a rating system progr -ammed (for example: the North American CARA) parents can prohibit watching con -tent that might be inadvisable for children. Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the UP or DOWN arrow to scroll to the available sel -ections. Selection 1 is Kid safe, selection 2 is some guidance advisable, selection 3 is PG (Parental guidance suggested, some material may not be suitable for children), selection 4 is PG13 (Parents strongly cau -tioned, some material may be inappropr -iate for children under 13), selection 5 is PG-R (Restricted, under 17 requires acco -mpanying parent or adult guardian), sele -ction 6 is Restricted viewing, selection 7 is NC-17 (No one 17 and under admitted), selection 8 is for Adult Entertainment or X rated movies and NO PARENTAL is for General Audiences (All Ages). Hereafter a screen will indicate to enter a password, if the ex-factory password has never been modified, you can use [123456] by pressing the according number buttons on the remote control. Select "YES" or "NO" with either the left or the right arrow key and press PLAY to confirm. PREFERENCE PAGE PREFERENCE PAGE LOAD FACTORY SETTING LOAD FACTORY SETTING TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT RESET RESET With this option you can select to reset to the factory preset values. When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET TV DISPLAY MODE SET TV DISPLAY MODE 4:3 PANSCAN 4:3 PANSCAN 4:3 LETTERBOX 4:3 LETTERBOX 16:9 16:9 Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE" item is selected, now press PLAY. Press SETUP to exit these system settings Set TV Display mode to the correct ratio: Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc formats will display different images depending this setting and the screen size used.. Hereunder is an example of the different choices and the relation between the disc format and screen ratio. of the different choices and the relation PREFERENCE PAGE PREFERENCE PAGE SET PARENTAL CONTROL SET PARENTAL CONTROL TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT 1 KIO SAF 1 KIO SAF 2 G 2 G 3 PG 3 PG 4 PG 13 4 PG 13 5 PGR 5 PGR 6 R 6 R 7 NC17 7 NC17 8 ADULT 8 ADULT Set age control grade: For DVD discs with a rating system progr -ammed (for example: the North American CARA) parents can prohibit watching con -tent that might be inadvisable for children. Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the UP or DOWN arrow to scroll to the available sel -ections. Selection 1 is Kid safe, selection 2 is some guidance advisable, selection 3 is PG (Parental guidance suggested, some material may not be suitable for children), selection 4 is PG13 (Parents strongly cau -tioned, some material may be inappropr -iate for children under 13), selection 5 is PG-R (Restricted, under 17 requires acco -mpanying parent or adult guardian), sele -ction 6 is Restricted viewing, selection 7 is NC-17 (No one 17 and under admitted), selection 8 is for Adult Entertainment or X rated movies and NO PARENTAL is for General Audiences (All Ages). Hereafter a screen will indicate to enter a password, if the ex-factory password has never been modified, you can use [123456] by pressing the according number buttons on the remote control. Select "YES" or "NO" with either the left or the right arrow key and press PLAY to confirm. PREFERENCE PAGE PREFERENCE PAGE LOAD FACTORY SETTING LOAD FACTORY SETTING TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT RESET RESET With this option you can select to reset to the factory preset values. PASSWORD SETUP PAGE PASSWORD SETUP PAGE PASSWORD MODE PASSWORD MODE PASSWORD MODE ON PASSWORD MODE ON PASSWORD PASSWORD ON ON OFF OFF With this option you can select to set your password protection ON or OFF. When you press SETUP on the panel or on the remote cotrol , the screen will display setup menu. SETUP MENU SETUP MENU Current item The explanation to the current item. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY Wide TV DISPLAY Wide ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON GOTO GENERAL SETUP PAGE GOTO GENERAL SETUP PAGE On the Remote Control, press either the UP or DOWN or LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET TV DISPLAY MODE SET TV DISPLAY MODE 4:3 PANSCAN 4:3 PANSCAN 4:3 LETTERBOX 4:3 LETTERBOX 16:9 16:9 Press the RIGHT arrow button to enter the sub-menu. If you want to set the screen to "WIDE", press the DOWN arrow twice to move your selection until the "WIDE" item is selected, now press PLAY. Press SETUP to exit these system settings Set TV Display mode to the correct ratio: Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc formats will display different images depending this setting and the screen size used.. Hereunder is an example of the different choices and the relation between the disc format and screen ratio. of the different choices and the relation PREFERENCE PAGE PREFERENCE PAGE SET PARENTAL CONTROL SET PARENTAL CONTROL TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT 1 KIO SAF 1 KIO SAF 2 G 2 G 3 PG 3 PG 4 PG 13 4 PG 13 5 PGR 5 PGR 6 R 6 R 7 NC17 7 NC17 8 ADULT 8 ADULT Set age control grade: For DVD discs with a rating system progr -ammed (for example: the North American CARA) parents can prohibit watching con -tent that might be inadvisable for children. Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the UP or DOWN arrow to scroll to the available sel -ections. Selection 1 is Kid safe, selection 2 is some guidance advisable, selection 3 is PG (Parental guidance suggested, some material may not be suitable for children), selection 4 is PG13 (Parents strongly cau -tioned, some material may be inappropr -iate for children under 13), selection 5 is PG-R (Restricted, under 17 requires acco -mpanying parent or adult guardian), sele -ction 6 is Restricted viewing, selection 7 is NC-17 (No one 17 and under admitted), selection 8 is for Adult Entertainment or X rated movies and NO PARENTAL is for General Audiences (All Ages). Hereafter a screen will indicate to enter a password, if the ex-factory password has never been modified, you can use [123456] by pressing the according number buttons on the remote control. Select "YES" or "NO" with either the left or the right arrow key and press PLAY to confirm. PREFERENCE PAGE PREFERENCE PAGE LOAD FACTORY SETTING LOAD FACTORY SETTING TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT RESET RESET With this option you can select to reset to the factory preset values. PASSWORD SETUP PAGE PASSWORD SETUP PAGE PASSWORD MODE PASSWORD MODE PASSWORD MODE ON PASSWORD MODE ON PASSWORD PASSWORD ON ON OFF OFF With this option you can select to set your password protection ON or OFF. PASSWORD SETUP PAGE PASSWORD SETUP PAGE CHANGE PASSWORD CHANGE PASSWORD PASSWORD MODE ON PASSWORD MODE ON PASSWORD PASSWORD CHANGE CHANGE Use this menu to change the factory set password [123456] OLD PASSWORD NEW PASSWORD CONFIRM PWD OK 7 14

ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH COLOR SETTING SETUP COLOR SETTING SETUP HUE HUE SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH COLOR SETTING SETUP COLOR SETTING SETUP HUE HUE SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP SATURATION SATURATION SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH COLOR SETTING SETUP COLOR SETTING SETUP HUE HUE SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP SATURATION SATURATION SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HUE HUE HUE HUE 0 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH COLOR SETTING SETUP COLOR SETTING SETUP HUE HUE SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP SATURATION SATURATION SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HUE HUE HUE HUE 0 SATURATION SATURATION SATURATION SATURATION 0 You can set the Hue (for NTSC) to your liking. Press PLAY/SAVE or the RIGHT arrow to enter the Hue control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Saturation to your liking. Press PLAY/SAVE or the RIGHT arrow to enter the Saturation control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. PREFERENCE PAGE PREFERENCE PAGE SET TV STANDARO SET TV STANDARO TV TYPE NTSC TV TYPE NTSC PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT PAL PAL MULTI MULTI NTSC NTSC 4:3LB Allow you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture. 4:3PS The movie will be shown full screen without any black margins, but parts of the image will be cut of from the right and left side. 16:9 Allow you to see movies in their original aspect ratio, when connected to a wide screen TV. The entire frame of the movie will be displayed. 16:9 Note: depending the DVD screen format (e.g. 2.35 :1), the wide screen setting may still have black margins above and below the picture. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET ANGLE MARK SET ANGLE MARK ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET OSD LANGUAGE SET OSD LANGUAGE GERMAN GERMAN FRENCH FRENCH ENGLISH ENGLISH SPANISH SPANISH ITALIAN ITALIAN PORTUGUESE PORTUGUESE DUTCH DUTCH DANISH DANISH COLOR SETTING SETUP COLOR SETTING SETUP HUE HUE SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP SATURATION SATURATION SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HUE HUE HUE HUE 0 SATURATION SATURATION SATURATION SATURATION 0 You can set the Hue (for NTSC) to your liking. Press PLAY/SAVE or the RIGHT arrow to enter the Hue control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Saturation to your liking. Press PLAY/SAVE or the RIGHT arrow to enter the Saturation control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. PREFERENCE PAGE PREFERENCE PAGE SET TV STANDARO SET TV STANDARO TV TYPE NTSC TV TYPE NTSC PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT PAL PAL MULTI MULTI NTSC NTSC PREFERENCE PAGE PREFERENCE PAGE SET PBC STATE SET PBC STATE TV TYPE PAL TV TYPE PAL PBC OFF PBC OFF PARENTAL PARENTAL DEFAULT DEFAULT ON ON OFF OFF Select this menu item to set up your preferred video output format. PAL is commonly used in Europe and NTSC is commonly used in the USA and Japan. Select MULTI only if your TV supports both formats, the output signal will follow automatically the video format on the DVD disc. For VCD and SVCD, this selection turns ON or OFF the Playback Control (PBC) function. VCD or SVCD media have PBC menu's that contains the track list. The default PBC state is set to ON. In OFF mode, no tracks can be selected. 8 13

selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP CONTRAST CONTRAST SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T You can set the Brightness to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Contrast to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP CONTRAST CONTRAST SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T You can set the Brightness to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Contrast to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS 0 When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP CONTRAST CONTRAST SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T You can set the Brightness to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Contrast to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS 0 CONTRAST CONTRAST CONTRAST CONTRAST 0 When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP CONTRAST CONTRAST SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T You can set the Brightness to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Contrast to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS 0 CONTRAST CONTRAST CONTRAST CONTRAST 0 COLOR SETTING SETUP COLOR SETTING SETUP GAMMA GAMMA SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HIGH HIGH MEDIUM MEDIUM LOW LOW NONE NONE When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD's. (whether this functions works, depends on the disc type in use.) When you have selected OFF, no angle mark will be shown on the screen. To select the language for your On Screen Display (OSD) use this menu item. There are multiple languages available. GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON CAPTIONS CAPTIONS ON ON OFF OFF GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SCREEN SAVER SCREEN SAVER ON ON OFF OFF ON: To display captions. (Subtitles) OFF: Captions will not be displayed. (No Subtitles) When there is no activity with the Player for some time, a screen saver will start to prevent damage to the screen. Select ON to activate the screen saver function or select OFF to deactivate this function GENERAL SETUP PAGE GENERAL SETUP PAGE TV DISPLAY PS TV DISPLAY PS ANGLE MARK ON ANGLE MARK ON OSD LANGUAGE ENG OSD LANGUAGE ENG CAPTIONS OFF CAPTIONS OFF SCREEN SAVER ON SCREEN SAVER ON LAST MEMORY ON LAST MEMORY ON SET LAST MEMORY STATE SET LAST MEMORY STATE ON ON OFF OFF ON: Each time when you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point. OFF : Disable the last memory function COLOR SETTING SETUP COLOR SETTING SETUP BRIGHTNESS BRIGHTNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T COLOR SETTING SETUP COLOR SETTING SETUP CONTRAST CONTRAST SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T You can set the Brightness to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. You can set the Contrast to your liking. Press PLAY or the RIGHT arrow to enter the brightness control, then press the UP or DOWN arrow to adjust the image. Press the LEFT arrow to go back to the menu. BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS 0 CONTRAST CONTRAST CONTRAST CONTRAST 0 COLOR SETTING SETUP COLOR SETTING SETUP GAMMA GAMMA SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HIGH HIGH MEDIUM MEDIUM LOW LOW NONE NONE COLOR SETTING SETUP COLOR SETTING SETUP LUMA DELAY LUMA DELAY SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T 0 T 0 T 1 T 1 T Gamma refers to the exponent between video or pixel values and the displayed brightness. You can set the Gamma to these choices and your liking. Luma Delay You can adjust the luminance delay by selecting one of these choices to best suit the brightness of your TV. 9 12

AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF TREBLE BOOST TREBLE BOOST ON ON OFF OFF You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that some- times the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality. AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF TREBLE BOOST TREBLE BOOST ON ON OFF OFF You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that some- times the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality. AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF TREBLE BOOST TREBLE BOOST ON ON OFF OFF You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that some- times the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality. 3D PROCESSING PAGE 3D PROCESSING PAGE PRO LOGIC II PRO LOGIC II REVERB MODE OFF REVERB MODE OFF REVERB MODE REVERB MODE OFF OFF CONCERT CONCERT LIVING ROOM LIVING ROOM HALL HALL BATHROOM BATHROOM CAVE CAVE ARENA ARENA CHURCH CHURCH Select 3D PROCESSING to set up your preferred 3D mode. Press PLAY to enter this selection and to set up your preferred Audio mode for a better surround effect. Press PLAY/SAVE or the RIGHT arrow to enter this selection. AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF TREBLE BOOST TREBLE BOOST ON ON OFF OFF You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that some- times the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality. 3D PROCESSING PAGE 3D PROCESSING PAGE PRO LOGIC II PRO LOGIC II REVERB MODE OFF REVERB MODE OFF REVERB MODE REVERB MODE OFF OFF CONCERT CONCERT LIVING ROOM LIVING ROOM HALL HALL BATHROOM BATHROOM CAVE CAVE ARENA ARENA CHURCH CHURCH Select 3D PROCESSING to set up your preferred 3D mode. Press PLAY to enter this selection and to set up your preferred Audio mode for a better surround effect. Press PLAY/SAVE or the RIGHT arrow to enter this selection. VIDEO SETUP PAGE VIDEO SETUP PAGE GOTO VIDEO SETUP PAGE GOTO VIDEO SETUP PAGE COLOR SETTING COLOR SETTING Select this menu item to set up your Video Quality modes. Press PLAY to enter this selection. AUDIO SETUP PAGE AUDIO SETUP PAGE ANALOG AUDIO SETUP ANALOG AUDIO SETUP EQUALIZER EQUALIZER 3D PROCESSING 3D PROCESSING HDCD HDCD GOTO AUDIO SETUP PAGE GOTO AUDIO SETUP PAGE Press PLAY to enter the Analog Audio setup page. The page hereunder will be shown: EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SELECT EQUALIZER TYPE SELECT EQUALIZER TYPE OFF OFF ROCK ROCK POP POP LIVE LIVE DANCE DANCE TECHNO TECHNO CLASSIC CLASSIC SOFT SOFT EQUALIZER Select this menu item to set up your preferred Equalizer mode. Press PLAY to enter this selection. You can select one of these preset Equalizer modes to adjust the audio signal to your best liking. ANALOG AUDIO SETUP PAGE ANALOG AUDIO SETUP PAGE DOWNMIX STR DOWNMIX STR SET DOWNMIX MODE SET DOWNMIX MODE LT/RT LT/RT STEREO STEREO Set sound mix output mode: press the RIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO",press the DOWN arrow once to move the selection to "STEREO", than press PLAY. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT", then press PLAY. EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF BASS BOOST BASS BOOST ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF SUPER BASS SUPER BASS ON ON OFF OFF EQUALIZER PAGE EQUALIZER PAGE SOUND MODE OFF SOUND MODE OFF BASS BOOST OFF BASS BOOST OFF SUPER BASS OFF SUPER BASS OFF TREBLE BOOST OFF TREBLE BOOST OFF TREBLE BOOST TREBLE BOOST ON ON OFF OFF You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that some- times the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality. 3D PROCESSING PAGE 3D PROCESSING PAGE PRO LOGIC II PRO LOGIC II REVERB MODE OFF REVERB MODE OFF REVERB MODE REVERB MODE OFF OFF CONCERT CONCERT LIVING ROOM LIVING ROOM HALL HALL BATHROOM BATHROOM CAVE CAVE ARENA ARENA CHURCH CHURCH Select 3D PROCESSING to set up your preferred 3D mode. Press PLAY to enter this selection and to set up your preferred Audio mode for a better surround effect. Press PLAY/SAVE or the RIGHT arrow to enter this selection. VIDEO SETUP PAGE VIDEO SETUP PAGE GOTO VIDEO SETUP PAGE GOTO VIDEO SETUP PAGE COLOR SETTING COLOR SETTING Select this menu item to set up your Video Quality modes. Press PLAY to enter this selection. HDCD SETUP PAGE HDCD SETUP PAGE FILTER 1X FILTER 1X FILTER FILTER OFF OFF 1X 1X 2X 2X Select HDCD to set up your preferred Audio mode for HDCD. Press PLAY to enter this selection and to set up your preferred filter mode for HDCD (default is 1X). 1x = 48K Sampling, 2x = 96K Sampling COLOR SETTING SETUP COLOR SETTING SETUP SHARPNESS SHARPNESS SHARPNESS MIO SHARPNESS MIO BRIGHTNESS 00 BRIGHTNESS 00 CONTRAST 00 CONTRAST 00 GAMMA NONE GAMMA NONE HUE 00 HUE 00 SATURATION 00 SATURATION 00 LUMA DELAY 1 T LUMA DELAY 1 T HIGH HIGH MEDIUM MEDIUM LOW LOW You can set the picture sharpness to these choices. If a video image is light, select the LOW option. If a video image is dark, select the option. HIGH 10 11