Winmate IKMH100 Operation & User’s Manual

PREFACE Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or warranty that such application will be suitable for the specified use without further testing or modification. Warranty We warrant that each of its products will be free from material and workmanship defects for a period of one year from the invoice date.(Standard is one year, extended warranty will need to discuss with our sales representatives. If the customer discovers a defect, we will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service. If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December). For example, the serial number 1W16Axxxxxxxx means October of year 2016.

III Customer Service We provide a service guide as below for any problem by the following steps: First, contact your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You need to prepare the following information before you call:  Product serial number  Peripheral attachments  Software (OS, version, application software, etc.)  Detailed problem description  The exact wording of any error messages In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Please do not hesitate to call or e-mail us.

Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. NOTE: A note is used to emphasize helpful information IMPORTANT: An important note indicates information that is important for you to know. CAUTION A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem. WARNING! An Electrical Shock Warning indicates the potential harm from electrical hazards and how to avoid the potential problem.

V Safety Precautions WARNING! Always completely disconnect the power from the device whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. CAUTION Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. Safety and Warranty 1. Please read these safety instructions carefully and keep this user manual for later reference. 2. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 3. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 4. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage. 5. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. 6. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 7. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over-voltage. 8. If any of the following situations arises, get the equipment checked by service personnel: A. The power cord or plug is damaged. B. Liquid has penetrated into the equipment. C. The equipment has been exposed to moisture. D. The equipment does not work well, or you cannot get it to work according to the user’s manual. E. The equipment has been dropped and damaged. F. The equipment has obvious signs of breakage

I IKMH100 M-SERIES BOX PC ABOUT THIS USER MANUAL This User Manual provides information about using the Winmate® M-Series Box PC with Intel® Core™ i5-6200U processor. The documentation set for the M -Series Box PC provides information for specific user needs, and includes:  M-Series Box PC User Manual – contains detailed description on how to use the Box PC, its components and features.  M-Series Quick Start Guide - describes how to get the device up and running. NOTE: Some pictures in this guide are samples and can differ from actual product. Document Revision History Version Date Note 1.0 7-Mar-2017 Initial release

CONTENTS PREFACE .................................................................................................................................................... II ABOUT THIS USER MANUAL ....................................................................................................................... I CHAPTER 1: GENERAL INFORMATION........................................................................................................ 2 1.1 INTRODUCTION .......................................................................................................................................... 2 1.2 PRODUCT FEATURES ................................................................................................................................... 2 1.3 PACKAGE CONTENTS ................................................................................................................................... 3 1.4 PHYSICAL DESCRIPTION ............................................................................................................................... 4 1.5 POWER BUTTON ........................................................................................................................................ 5 1.6 RESET BUTTON .......................................................................................................................................... 5 1.7 LED INDICATOR ......................................................................................................................................... 6 CHAPTER 2: HARDWARE INSTALLATION .................................................................................................... 8 2.1 CONNECTOR DESCRIPTION ........................................................................................................................... 8 2.1.1 Isolated DC in Connector ............................................................................................................... 8 2.1.2 Mic In, Line In and Line Out ........................................................................................................... 8 2.1.3 Serial Port Connector..................................................................................................................... 8 2.1.4 USB 3.0 Connector ......................................................................................................................... 9 2.1.5 VGA Output Connector .................................................................................................................. 9 2.1.6 HDMI Output Connector ............................................................................................................... 9 2.1.7 Giga LAN Connector .................................................................................................................... 10 2.2 CONFIGURING SERIAL PORT SETTINGS .......................................................................................................... 11 2.3 HARDWARE INSTALLATION ......................................................................................................................... 12 2.3.1 Hard Disk Replacement ............................................................................................................... 12 2.3.2 PCI Card, RAM, Internal SSD, Fuse Replacement ......................................................................... 13 2.3.3 Expansion Slot Replacement (Preliminary) .................................................................................. 15 CHAPTER 3: AMI UEFI BIOS SETUP .......................................................................................................... 17 3.1 WHEN AND HOW TO USE BIOS SETUP ........................................................................................................ 17 3.2 BIOS FUNCTIONS .................................................................................................................................... 18 3.2.1 Main Menu .................................................................................................................................. 19 3.2.2 Advanced Menu .......................................................................................................................... 20 3.2.3 Chipset Menu .............................................................................................................................. 33 3.2.4 Security Menu ............................................................................................................................. 40 3.2.5 Boot Menu................................................................................................................................... 43 3.2.6 Save&Exit .................................................................................................................................... 45

3.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ........................................................................................ 47 3.4 HOW TO ENABLE WATCHDOG ..................................................................................................................... 49 CHAPTER 4: DRIVER INSTALLATION ......................................................................................................... 52 4.1 CHIPSET DRIVER INSTALLATION ................................................................................................................... 52 4.2 GRAPHIC DRIVER INSTALLATION .................................................................................................................. 55 4.3 ME AND NET FRAMEWORK 1.1 DRIVER INSTALLATION ................................................................................... 59 4.4 AUDIO DRIVER INSTALLATION ..................................................................................................................... 64 4.5 LAN DRIVER INSTALLATION ........................................................................................................................ 66 4.6 RST DRIVER INSTALLATION ......................................................................................................................... 69 4.7 MICROSOFT .NET FRAMEWORK DRIVER INSTALLATION ................................................................................... 73 4.8 WATCHDOG DRIVER INSTALLATION .............................................................................................................. 75 CHAPTER 5: TECHNICAL SUPPORT ........................................................................................................... 80 5.1 SOFTWARE DEVELOPER SUPPORT ................................................................................................................ 80 5.2 PROBLEM REPORT FORM ........................................................................................................................... 81 APPENDIX A: PCIE CARD DIMENSIONS .................................................................................................... 83 APPENDIX B: PRODUCT SPECIFICATIONS ................................................................................................. 85

GENERAL INFORMATION This chapter includes IKMH100 M-Series Box PC background information.

2 CHAPTER 1: GENERAL INFORMATION This chapter includes Winmate® IKMH100 M-Series Box PC background information such as features, hardware specification, dimensions and appearance. 1.1 Introduction Thank you for choosing the Winmate® IKMH100 M-Series Box PC. This is versatile and cost-effective solution for your industrial needs. Intel® Core ™ i5-6200U 2.70 GHz (Skylake) processor onboard with fanless cooling system assures steady performance and silent functioning. Motherboard offers various inputs/ output connectors: two Ethernet ports, four USB3.0, HDMI and VGA outputs, two serial ports and one 2.5” SSD Bay. M-Series Box PC perfectly fits in applications where total costs of ownership (TCO) and quick recovery of failure is important. The flexible system design provides easy access to components and can be serviced by local maintenance team. Versatile, easy-to-service and upgradable IKMH100 offers the best solution for industrial and building automation. 1.2 Product Features Winmate® IKMH100 M-Series Box PC has the following features:  Intel® Core™ i5-6200U 2.3 GHz, up to 2.8 GHz  Modular design  Auto detection of the connected display, No settings necessary  Quick & Easy Replaceable Hard Disk Design, No Tools needed  Support wide range 9-29V isolation DC input  Optional with Modular front Display as a Panel PC  Expansion slot for PCIex4  Quick & Easy Removable 2.5” SSD Bay Slot

1.3 Package Contents Carefully remove the box and unpack your IKMH100 M-Series Box PC. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list: IKMH100 Box PC Driver CD& User Manual Quick Start Guide (Hardcopy) Varies by product specifications 9171111I102Z 915211101023 Open Wire Cable Power Cord AC Adapter + Terminal Block (12V/ 80W) 94EL02X020E0 Varies by country 90PO12080007

4 1.4 Physical Description This section explains physical characteristics of the IKMH100 M-Series Box PC. The module front panel consists of 2.5” SSD Bay, power/reset buttons, audio jacks, two RJ45 connectors, HDMI and VGA outputs, and four USB 3.0 ports. IKMH100 M-Series Box PC has customizable expansion slot (Preliminary). Figure below shows the dimensions of the Winmate® IKMH100 M-Series Box PC. Measurements shown in mm All Dimensions are ± 0.5 mm *Note: this is a simplified drawing and some components are not marked in detail.

No Description No Description ① PCIe Slot Cover for one half-length PCIe x4 card ⑩ Mic in ② 9-29V isolation DC-in ⑪ 2.5” HDD x 1 ③ Giga LAN ⑫ Expansion slot (Preliminary)* ④ Giga LAN ⑬ Line in ⑤ USB 3.0 x 2 ⑭ Line out ⑥ USB 3.0 x 2 ⑮ HDD LED indicator ⑦ HDMI output ⑯ Reset ⑧ VGA Output ⑰ Power Button ⑨ RS-232/422/485 * Expansion slot configurations (Preliminary):  USB 2.0 x 4  Giga LAN x 2  COM x 2  3G with SIM x 1  USB 3.0 x 2 1.5 Power Button IKMH100 Box PC has a Power On/ Off button on the front side. 1.6 Reset Button IKMH100 Box PC has a Reset Button located on the front side. Press reset button to reboot the computer forcibly.

6 1.7 LED Indicator The IKMH100 provides one HDD LED indicator for status monitoring. LED Indicator: LED Indicator Color Description HDD Off Slot is empty; drive is not yet discovered by the system. Green HDD operating normally.

HARDWARE INSTALLATION This chapter provides information on how to use jumpers and connectors on the motherboard, and the IKMH100 M-Series Box PC hardware specifications and installation instruction.

8 CHAPTER 2: HARDWARE INSTALLATION This chapter provides information on external connectors on IKMH100 M-Series Box PC and hardware specifications and installation instruction. 2.1 Connector Description This section includes I/O side connectors and its pinouts. 2.1.1 Isolated DC in Connector IKMH100 has a 3pin terminal block that accepts 9~29V DC input. 2.1.2 Mic In, Line In and Line Out 2.1.3 Serial Port Connector The IKMH100 Box PC uses D-SUB 9pin connector to connect serial interfaces. Serial port settings can be configured for RS-232, RS-422 or RS-485 by jumpers. Refer to Ch.2, Configuring Serial Port Settings section of this user manual for the instruction on how to configure serial port settings. Voltage Minimum Voltage 9V Maximum Voltage 29V Color Signal Name Mic In Mic in Blue Line in Green Line out Pin № RS-232 (Default) RS-422 RS-485 1 DCD TxD- D- 2 RXD TxD+ D+ 3 TXD RxD+ NC 4 DTR RxD- NC 5 GND GND GND 6 DSR NC NC 7 RTS NC NC 8 CTS NC NC 9 RI NC NC

2.1.4 USB 3.0 Connector The IKMH100 has four USB 3.0 connectors. Use USB3.0 connectors to connect external devices such as mouse or keyboard to the device. 2.1.5 VGA Output Connector The IKMH100 has VGA connector (D-Sub 15pin Female). Use VGA cable to connect the display to the PC system. 2.1.6 HDMI Output Connector Use HDMI A Type19-pin female output connector to connect the HMI device to an external display. Pin № Signal Name Pin № Signal Name 1 +5V 2 USB_D- 3 USB_D+ 4 GND 5 STDA_SSRX- 6 STDA_SSRX+ 7 GND_DRAIN 8 STDA_SSTX- 9 STDA_SSTX+ Pin № Signal Name Pin № Signal Name 1 RED 2 GREEN 3 BLUE 4 ID2/RES 5 GND 6 RED_RTN 7 GREEN_RTN 8 BLUE_RTN 9 KEY/PWR 10 GND 11 ID0/RES 12 ID1/SDA 13 HSync 14 VSync 15 ID3/SCL Pin № Signal Name Pin № Signal Name 1 TMDS_DATA2+ 2 GND 3 TMDS_DATA2- 4 TMDS_DATA1+ 5 GND 6 TMDS_DATA1- 7 TMDS_DATA0+ 8 GND 9 TMDS_DATA0- 10 TMDS_CLOCK+ 11 GND 12 TMDS_CLOCK- 13 CEC 14 NC 15 DDC_CLOCK 16 DDC_DATA 17 GND 18 5V 19 Hot Plug Detect

10 2.1.7 Giga LAN Connector The IKMH100 equipped with one RJ45 10/100/1000 Mbps Ethernet interface for connecting to the internet. Pin № Signal Name Pin № Signal Name 1 TX1+ 2 TX1- 3 TX2+ 4 TX2- 5 TX3+ 6 TX3- 7 TX4+ 8 TX4-

2.2 Configuring Serial Port Settings Serial Port COM1 can be configured for RS-232, RS-422 or RS-485. Jumpers are located on the motherboard. You need to open the housing in order to access the jumpers. CAUTION/ ATTENTION It is recommended to use factory jumper settings. Opening the housing when it is sealed may damage the device and its parts. Il est recommandé d’utiliser la configuration d’usine de cavalier. Ouvrir le chassis lorsqu’il est scellé peut endommagé l’appareil et ses pièces. Note: A pair of needle nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is shown below. When the jumper cap is placed on both pins, the jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2 are short. If you remove the jumper cap, the jumper is OPEN. PIN 1-2 SHORT PIN 3 OPEN Both Jumper 8 and Jumper 9 allow setting the Serial Port COM1 configuration. Refer to the table below for PIN assignment. Example: To make RS-232 Settings, set the Jumper 8 Pin 1-2 to the SHORT position, and Jumper 9 Pin1-2, 4-5, 7-8, 10-11 to the SHORT position.

12 2.3 Hardware Installation This section explains how to replace HDD/SDD, install PCI Card/ RAM/ Internal SSD, and replace fuses on the IKMH100 M-Series Box PC. WARNING! Switch off the power and unplug the power cord. Each time the IKMH100 M-Series Box PC is serviced, users should be aware of this condition. 2.3.1 Hard Disk Replacement To remove the hard disk: 1. Loosen by hand one thumbscrew on the rear bottom side of the device. In order to loosen the screw slightly push the screw and turn it to the left. 2. Open the cover door. 3. Carefully pull the 2.5” hard disk bay out of the slot. 4. The hard disk bay don’t not fall out by itself, the retaining springs hold it in place. Hard disk can’t be inserted in the wrong direction. Reverse this procedure to install the hard disk bay.

2.3.2 PCI Card, RAM, Internal SSD, Fuse Replacement To remove the PCI card, RAM, Internal SSD, Fuse: 1. Turn the device right-side up, with the back toward you. 2. Loosen two Philips M3x5 screws that secure side cover. 3. Loosen four Philips M3x5 screws that secure top cover. 4. Remove PCI card/ RAM/ Internal SSD/ Fuse

14 Reverse this procedure to install the PCI card/ RAM/ Internal SSD/ Fuse.

2.3.3 Expansion Slot Replacement (Preliminary) IKMH100 M-Series Box PC has customizable expansion slot. To replace expansion slot: 1. Undo two screws that secure expansion slot to the Box PC. 2. Remove the slot. 3. Replace the slot with a new one (if needed). Reverse this procedure to install the expansion slot.

IKMH100 M-SERIES BOX PC 16 AMI UEFI BIOS SETUP BIOS Setup Utility is a program for configuration basic Input / Output system settings of the computer for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu.

17 IKMH100 M-SERIES BOX PC CHAPTER 3: AMI UEFI BIOS SETUP BIOS Setup Utility is a program for configuration basic Input / Output system settings of the computer for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu. 3.1 When and How to Use BIOS Setup To enter the BIOS setup, you need to connect an external USB keyboard, press key when the prompt appears on the screen during start up. The prompt screen shows only few seconds, you need to press key quickly. If the message disappears before your respond, restart the system by turning it OFF and ON, and enter the BIOS again. IMPORTANT: Updated BIOS version may be published after the manual released. Check the latest version of BIOS on the website. Run BIOS setup utility for: 1. Error message on screen indicates to check BIOS setup 2. Restoring the factory default settings. 3. Modifying the specific hardware specifications 4. Necessity to optimize specifications

IKMH100 M-SERIES BOX PC 18 3.2 BIOS Functions BIOS Navigation Keys BIOS navigation keys for keyboard control are listed below. The following keys are enabled during POST: Key Function Del Enters the BIOS setup menu. F7 Display the boot menu. Lists all bootable devices that are connected to the system. With cursor ↑and cursor ↓and by pressing , select the device used for the boot. Pause Pressing the [Pause] key stops the POST. Press any other key to resume the POST. The following Keys can be used after entering the BIOS Setup. Key Function F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit Esc Exit +/- Change Opt. Enter Select or execute command Cursor ↑ Moves to the previous item Cursor ↓ Goes to the next item Cursor ← Moves to the previous item Cursor → Goes to the next item NOTE: You can press the F1, F2, F3, F4, –/+, and Esc keys by connecting a USB keyboard to your device. For items marked ► press for more options.

19 IKMH100 M-SERIES BOX PC 3.2.1 Main Menu When you enter BIOS setup, the first menu that appears on the screen is the main menu.It contains the system information including BIOS version, processor RC version, system language, time, and date. Immediately after the [DEL] key is pressed during startup, the main BIOS setup menu appears.

IKMH100 M-SERIES BOX PC 20 3.2.2 Advanced Menu The advanced menu also uses to set configuration of the CPU and other system devices. There are sub menus on the left frame of the screen. IMPORTANT: Handle advanced BIOS settings page with caution. Any changes can affect the operation of your computer. Advanced Configuration and Power Interface (ACPI) settings allow to control how the power switch operates. The power supply can be adjusted for power requirements. You can use the screen to select options of ACPI configuration. A description of the selected items will appear on the right side of the screen.

21 IKMH100 M-SERIES BOX PC BIOS Setting Description Setting Option Effect Intel ® I211 Gigabit Network Connection Configure Gigabit device parameters Enter Opens submenu Trusted Computing Configures Trusted Computing settings Enter Opens submenu ACPI Settings Configures ACPI Settings Enter Opens submenu F81866 Super IO Configuration Configures F81866 Super IO settings Enter Opens submenu Hardware Monitor Configures Hardware Monitor settings Enter Opens submenu RTC Wake Settings Configures RTC Wake parameters Enter Opens submenu CPU Configuration Configures CPU settings Enter Opens submenu SATA Configuration Configures SATA parameters Enter Opens submenu Network Stack Configuration Configures Network Stack Configuration parameters Enter Opens submenu CSM Configuration Configures CSM parameters Enter Opens submenu USB Configuration Configures USB Settings Enter Opens submenu For items marked ► press for more options.

IKMH100 M-SERIES BOX PC 22 3.2.2.1 CPU Configuration CPU Configuration allows you to change CPU settings. Use key arrows to navigate through the menu. BIOS Setting Description Setting Option Effect Hyper-threading Hyper-threading is a function in processors that speeds up computer performance. Enable/ Disable Enables or Disables this function Execute Disabled Bit EDB is a hardware-based security component used in the central processing unit (CPU) to separate areas of a memory as storage of processor instructions or as storage of data. Enable Reduces a computer system's, or a server’s, vulnerability to viruses and malicious code attacks Disable Increases the risk to be infected by viruses

23 IKMH100 M-SERIES BOX PC Intel Virtualization Technology Enables a CPU to act as if you have several independent computers, in order to enable several operating systems to run at the same time on the same machine. Enable/ Disable Enable or disable this function Boot Performance Mode This feature selects the performance state the BIOS will set before the OS hand-off. Auto Auto mode Standard Allows processor cores to run at the frequency recommended by the manufacturer. Turbo Allows processor cores to run faster than the frequency recommended by the manufacturer. EIST Enhanced Intel SpeedStep Technology gives your OS the ability to switch the processor's speed and voltage up and down, to preserve power when not much is being computed. Enabled/ Disabled Enable or disable this function Turbo Mode Adjusts the power and clock speed of processor cores as needed to better match processor power to your needs. Enabled/ Disabled Enable or disable this function CPU C states Configure CPU C states parameters Enabled/ Disabled Enable or disable this function CPU DTS Digital Thermal Sensors (DTS) parameters. Enabled/ Disabled Enable or disable this function

IKMH100 M-SERIES BOX PC 24 3.2.2.2 Trusted Computing BIOS Setting Description Setting Option Effect Security Device Support Enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available Enabled/ Disabled Enable or disable this function. TPM State Trusted Platform Module (TPM) parameters. Enabled/ Disabled Enable or disable this function. Pending operation Pending operation parameters None Shows the number of pending operations Device Select Selects the device Auto

25 IKMH100 M-SERIES BOX PC 3.2.2.3 ACPI Settings BIOS Setting Description Setting Option Effect Enable ACPI Auto Configuration Enable or disable BIOS ACPI Auto Configuration Enabled/ Disabled Enable or disable this function Enable Hibernation To enable or disable hibernation Enabled/ Disabled Enable or disable this function

IKMH100 M-SERIES BOX PC 26 3.2.2.4 F81866 Super IO Configuration BIOS Setting Description Setting Option Effect Serial Port 1,2 Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and select optimal settings for the super IO Device. Enabled/ Disabled Default: Enable Enable or disable Serial Port (COM) Watch Dog Timer Select This watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function after the programmed period. Enabled/ Disabled Enable or disable this function

27 IKMH100 M-SERIES BOX PC 3.2.2.5 Hardware Monitor You can check PC Health Status parameters such as system temperature, fan speed etc.

IKMH100 M-SERIES BOX PC 28 3.2.2.6 RTC Wake Settings BIOS Setting Description Setting Option Effect Wake system from S5 Configure wake from full shutdown and boot mode (S5) system setting Enabled/ Disabled Enable or disable this function. When enabled, the system will wake on full shutdown and boot mode.

29 IKMH100 M-SERIES BOX PC 3.2.2.7 SATA Configuration BIOS Setting Description Setting Option Effect SATA Controller(s) Allows users to enable or disable the SATA controller(s). Enabled/ Disabled Enable or disable this function SATA Mode Selection Allows users to select mode of SATA controller(s). AHCI Work in AHCI mode of SATA controller(s) SATA Controller Speed Allows users to select mode of SATA Controller Speed. Default SATA Controller Speed default settings Serial ATA Port 0/1/2 Allows users to enable or disable the SATA Port. Enabled/ Disabled Enable or disable this function

IKMH100 M-SERIES BOX PC 30 3.2.2.8 CSM Configuration Compatability Support Module Configuration. BIOS Setting Description Setting Option Effect CSM Support The Compatibility Support Module (CSM) is a component of the UEFI firmware that provides legacy BIOS compatibility by emulating a BIOS environment, allowing legacy operating systems and some option ROMs that do not support UEFI to still be used. Enabled/ Disabled Enable or disable the Compatibility Support Module GetaA20 Active Activate GetaA20 Upon Request Enable or disable this function Option ROM Messages Receiving ROM Messages Settings Force BIOS Set ROM messages parameters Network Specifies which Network option ROM is booted UEFI Only UEFI option ROMs are booted Legacy Only Legacy option ROMs are booted

31 IKMH100 M-SERIES BOX PC 3.2.2.9 USB Configuration BIOS Setting Description Setting Option Effect Legacy USB Support User can enable or disable USB port. Auto Disable legacy support if no USB devices are connected Disable Will keep USB devices available only for EFI applications. Enable Enable all the USB devices XHCI Hand‐off This is a workaround for OSs without XHCI hand‐ off support. The XHCI ownership Change should claim by XHCI driver. Disable Disables this function Enable Enables this function

IKMH100 M-SERIES BOX PC 32 EHCI Hand‐off This is a workaround for OSs without ECHI hand‐ off support. The EHCI ownership change should be claimed by EHCI driver. *Disabled Disables this function Enable Enables this function USB Mass Storage Driver Support User can Enable or disable USB mass storage driver support. Disable Disables this function Enable Enables this function USB Transfer time‐ out The time‐out value for control, bulk, and interrupt transfers. 1 Sec 5 Sec 10 Sec *20 Sec Depends on the time‐out value Device Reset time‐ out USB mass storage device start unit command time‐ out. 10 Sec *20 Sec 30 Sec 40 Sec Depends on the time‐out value Device power‐up delay Maximum time the device will take before it properly reports itself to the host controller. Auto Uses default value: for a root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor

33 IKMH100 M-SERIES BOX PC 3.2.3 Chipset Menu BIOS Setting Description Setting Option Effect System Agent (SA) Configuration System Agent (SA) Parameters Enter Opens submenu PCH-IO Configuration PCH Parameters Enter Opens submenu

IKMH100 M-SERIES BOX PC 34 3.2.3.1 System Agent (SA) Configuration BIOS Setting Description Setting Option Effect VT-d VT-d can help end users improve security and reliability of the systems and also improve performance of I/O devices in virtualized environment. Enable/Disable Enables or disables this function Graphics Configuration Configures Graphics parameters Enter Opens submenu

35 IKMH100 M-SERIES BOX PC 3.2.3.1.1 Graphics Configuration BIOS Setting Description Setting Option Effect Graphics Turbo IMON Current Graphics turbo IMON current values supported 14~31 14~31 Set up the value of Graphics turbo IMON current Internal Graphics Configures Internal Graphics parameters Auto Set up internal graphics parameters Aperture Size Configures aperture size settings 256MB Set up aperture size parameters DVMT Pre-Allocation Configures DVMT Pre-Allocation parameters 32M Set up DVMT Pre-Allocation parameters DVMT Total Gfx Mem Configures DVMT Total Gfx Mem parameters 256M Set up DVMT Total Gfx Mem parameters Gfx Low Power Mode Configures Gfx Low Power Mode settings Enable/Disable Enables or disables this function

IKMH100 M-SERIES BOX PC 36 3.2.3.2 PCI Configuration BIOS Setting Description Setting Option Effect PCI Express Configuration Configures PCI Express parameters Enter Opens submenu USB Configuration Configures USB parameters Enter Opens submenu PCH LAN Controller Configures PCH LAN Controller parameters Enable/Disable Enables or disables this function Wake on LAN Set up wake on LAN function Enable/Disable Enables or disables this function SLP_A4 Assertion Width Configures SLP_A4 Assertion Width parameters 4-5 seconds Set up SLP_A4 Assertion Width parameters Restore AC Power Loss Enabling this will allow the computer to power up once house hold power is established. Power On Set Restore AC Power Loss parameters

37 IKMH100 M-SERIES BOX PC 3.2.3.2.1 PCI Express Configuration BIOS Setting Description Setting Option Effect DMI Link ASPM Control The control of Active State Power Management on both NB side and SB side of the DMI Link. Enable/ Disable Enables or disables this function DMI Link Extended Synch Control The control of DMI Link Extended Synch parameters Enable/ Disable Enables or disables this function PCI Express Root Port 1~6 PCI Express Root Port 1~6 parameters Enter Opens sub-menu (see next section)

IKMH100 M-SERIES BOX PC 38 PCI Express Root BIOS Setting Description Setting Option Effect PCI Express Root Port 1 The control of PCI Express Root Port Enable/ Disable Enables or disables this function ASPM Support Configures ASPM Support parameters Enable/ Disable Enables or disables this function L1 Substates Configures L1 Substates parameters L1.1 & L1.2 Setting up L1 Substates parameters Gen3 Eq Phase3 Method Configures Gen3 Eq Phase3 Method Software Search Setting up Gen3 Eq Phase3 Method parameters PCI Speed Configures PCI Speed parameters Auto Setting up PCI Speed Detect Non-Compliance Device Detect the device that is not compliant to the system settings Enable/ Disable Enables or disables this function Extra Bus Reserved Configures Extra Bus Reserved parameters Set the value Setting up the value

39 IKMH100 M-SERIES BOX PC Reserved Memory Configures Reserved Memory parameters Set the value Setting up the value Prefetchable Memory Configures Prefetchable Memory parameters Set the value Setting up the value USB Configuration BIOS Setting Description Setting Option Effect USB Precondition Allows user to enable or disable USB Precondition Enable/ Disable Enables or disables this function USB Ports Per-Port Disable Control Control each of the USB ports (0~XX) disabling Enable/ Disable Enables or disables this function

IKMH100 M-SERIES BOX PC 40 3.2.4 Security Menu This section allows you to configure and improve your system and allows you to set up some system features according to your preference. BIOS Setting Description Setting Option Effect Administrator Password Displays whether or not an administrator password has been set. Enter Enter password User Password Display whether or not a user Password has been set. Enter Enter password Secure Boot Menu This feature designed to prevent malicious software and unauthorized media from loading during the boot process. Enter Opens sub-menu

41 IKMH100 M-SERIES BOX PC 3.2.4.1 Security Boot Menu BIOS Setting Description Setting Option Effect Secure Boot Secure Boot is a feature designed to prevent malicious software and unauthorized media from loading during the boot process. Enable/ Disable Enables or disables this function Secure Boot Management Manage Secure Boot settings Custom Configure Secure Boot parameters Key Management Setting Key Management parameters Enter Opens sub-menu

43 IKMH100 M-SERIES BOX PC 3.2.5 Boot Menu BIOS Setting Description Setting Option Effect Setup Prompt Timeout Allows user to configure the number of seconds to stay in BIOS setup prompt screen. Enter Set the prompt timeout Boot NumLock State Enables or disables NumLock feature on the numeric keypad of the keyboard after the POST (Default: On). On Remains On Off Remains OFF Quite Boot Determines if POST message or OEM logo (default = Black background) is displayed. Disabled Disables this function Enabled Enables this function Boot Mode Select Select boot mode LEGACY/ UEFI Select LEGACY or UEFI boot mode.

IKMH100 M-SERIES BOX PC 44 Boot Option Priorities Specifies the overall boot order from the available devices Ex: Boot Option#1 (network); Options: #1~#7 Ex.: Set Network as the first priority Hard Drive 2 BBS Priorities Specifies the boot order for Hard Drive BBS parameters Enter Enter the submenu USB Key Drive Priorities Specifies the boot order for USB Key Drive Enter Enter the submenu

45 IKMH100 M-SERIES BOX PC 3.2.6 Save&Exit BIOS Setting Description Setting Option Effect Save Changes and Exit This saves the changes to the CMOS and exits the BIOS Setup program. Save changes Discard Changes and Exit This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Saves the changes Return to the BIOS Setup Main Menu Save Changes and Reset Reset the system after saving the changes. Saves the changes Return to the BIOS Setup Main Menu Discard Changes and Reset Reset system setup without saving any changes Saves the changes Return to the BIOS Setup Main Menu Save Changes Save changes done so far to any of the Saves the changes

IKMH100 M-SERIES BOX PC 46 setup options. Return to the BIOS Setup Main Menu Discard Changes Discard changes done so far to any of the setup options. Saves the changes Return to the BIOS Setup Main Menu Restore Defaults Restore/load default values for all the setup options. Saves the changes Return to the BIOS Setup Main Menu Save as User Defaults Save the changes done so far as User defaults. Saves the changes Return to the BIOS Setup Main Menu Restore User Defaults Restore the User Defaults to all the setup options. Saves the changes Return to the BIOS Setup Main Menu Launch EFI Shell Launch Extensible Firmware Interface menu Saves the changes Return to the BIOS Setup Main Menu

47 IKMH100 M-SERIES BOX PC 3.3 Using Recovery Wizard to Restore Computer Note: Before starting the recovery process, make sure to backup all user data. The data will be lost after the recovery process. To enable quick one-key recovery procedure:  Plug-in the AC adapter to the series computer. Make sure the computer stays plugged in to power source during the recovery process.  Turn on the computer, and when the boot screen shows up, press the F6 to initiate the Recovery Wizard.  The following screen shows the Recovery Wizard. Click Recovery button to continue.

IKMH100 M-SERIES BOX PC 48 A warning message about data loss will show up. Make sure the data is backed up before recovery, and click Yes to continue. Wait the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of recovery process complete. The system will restart automatically after recovery completed.

49 IKMH100 M-SERIES BOX PC 3.4 How to Enable Watchdog To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center or File Share. Refer to the User Manual for more details. To enable watchdog in Watchdog AP follow the instructions below: 1. On the right bottom side of the desktop screen, click triangle button to show hidden icons. 2. Click icon to open Watchdog utility.

IKMH100 M-SERIES BOX PC 50 3. In Watchdog utility window set countdown time and periodically feed time, or disable watchdog. Example: Every 10 min watchdog will monitor the system, in case any error occurs the system will restart automatically when the countdown time reaches 0. Every 9 min watchdog timer will be reset to 10 min. Setting Description Watchdog Countdown Time The system automaticity restarts when this countdown time reaches zero. Default: 10 min Periodically Feed Time To set a cycle time to automatically reset watchdog timer. Default: 9 min Enable / Disable Enable or disable watchdog. Default: Enable

DRIVER INSTALLATION This chapter provides driver installation instructions.

52 CHAPTER 4: DRIVER INSTALLATION This chapter provides instructions on how to install drivers on the IKHM100 M-Series Box PC. 4.1 Chipset Driver Installation Follow instructions below to install Chipset driver. 1. Open the Driver CD (included in the package) and select Chipset driver. 2. Installation window will pop up, select Next. 3. Select Accept to agree with the terms of license agreement.

4. Check the ReadMe file information, select Install to continue.

54 5. Wait for the driver to be installed. 6. When installation completed, select Restart Now to restart your computer.

4.2 Graphic Driver Installation Follow instructions below to install Graphic driver. 1. Open the Driver CD (included in the package) and select Graphic driver. 2. Installation window will pop up, select Next.

56 3. Select Yes to agree with the terms of license agreement. 4. Check the ReadMe file information, select Next to continue.

5. Wait for the driver to be installed. 6. Select Next to continue.

58 7. After installation is completed, select “Yes, I want to restart this computer now”, and click Finish.

4.3 ME and NET Framework 1.1 Driver Installation Follow instructions below to install Management Engine (ME) and .NET Framework 1.1 driver. 1. Open the Driver CD (included in the package) and select ME driver. 2. Error message will pop up, select Finish.

60 3. Select .NET Framework 1.1. 4. Select Yes to start the installation.

5. Wait for the driver to be installed. 6. When installation completed, select Restart Now to restart your computer. 7. Again select the ME to continue installation. Select Next.

62 8. Please check the license agreement, and then select Next. 9. Select Next to start the installation. 10. Wait for the driver to be installed.

11. When installation completed, select Finish complete installation.

64 4.4 Audio Driver Installation Follow instructions below to install Audio driver. 1. Open the Driver CD (included in the package) and select Audio driver. 2. Select Next to continue.

3. Wait for the driver to be installed. 4. When installation completed, select Finish complete installation.

66 4.5 LAN Driver Installation Follow instructions below to install LAN driver. 1. Open the Driver CD (included in the package) and select LAN driver. 2. Compression has started.

3. When compression is complete, select Next. 4. Read the license agreement, and then select Next. 5. System displays the installed packages, select Next.

68 6. Confirm the installation, select Install to start the installation. 7. Wait for installation to complete. 8. When installation is completed, select Finish to close the window.

4.6 RST Driver Installation Follow instructions below to install RTS driver. 1. Open the Driver CD (included in the package) and select RTS driver. 2. Select Next to continue.

70 3. Read the license agreement, and then select Next. 4. Confirm the installation, select Install to start the installation. 5. Select Next to continue.

6. Select Next to start the installation. 7. Wait for installation to complete. 8. Warning message will pop up, select Install.

72 9. Installation continues. 10. When installation is completed, select Finish to close the window.

4.7 Microsoft .NET Framework Driver Installation Follow instructions below to install Microsoft .NET Framework. 1. Open the Driver CD (included in the package) and select .NET Framework. 2. Wait for system to Import the file.

74 3. Read the license agreement, and then select “I agree”. 4. Wait for installation to complete. 5. When installation is completed, select Finish to close the window.

4.8 WatchDog Driver Installation For more details about Winmate Watchdog, please download Watchdog Guide from Winmate Downloads Center: http://dc.winmate.com.tw/_downloadCenter/2017/Embedded%20Computing/Watc hdog%20Guide_IB_IH_IV_IK.pdf Follow instructions below to install Watchdog driver. 1. Open the Driver CD (included in the package) and select Watchdog driver. 2. Check message and select Install to begin the installation.

76 3. Wait for installation to complete. 4. When installation is complete, press any key to close. 5. Open the Driver CD (included in the package) and select Watchdog AP.

6. Select Next. 7. The installed storage location is displayed, select Next to continue. 8. Select Next to start the installation.

78 9. Wait for installation to complete. 10. When installation is completed, select Close to close the window.

TECHNICAL SUPPORT This chapter contains directory to technical support.

80 CHAPTER 5: TECHNICAL SUPPORT This chapter includes technical support documents and software developing kit (SDK). If any problem occurs fill in problem report form enclosed and immediately contact us. 5.1 Software Developer Support Winmate provides the following development kits (SDK) for IKMH100 M-Series Box PC: Item File Type Description 1 Watchdog SDK & AP Watchdog SDK and AP You can download drivers and SDK and other from Winmate Download Center or Winmate File Share. Winmate Download Center: http://www.winmate.com/DownCenter/DownLoadCenter.asp?DownType=2906&Onl yContent Winmate File Share: https://winmate.box.com/v/M-Series-Box-PC-IKMH100

5.2 Problem Report Form M-Series Box PC (Modular Design) Customer name: Company: Tel.: Fax: E-mail: Date: Product Serial Number: ____________________________________________________________________ Problem Description: Please describe the problem as clearly as possible. Detailed description of the occurred problem will allow us to find the best solution to solve the problem as soon as possible. _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________

IKMH100 M-SERIES BOX PC 82 PCIE CARD DIMENSIONS This section includes mechanical dimensions of Expansion PCIe Card Appendix

83 IKMH100 M-SERIES BOX PC APPENDIX A: PCIE CARD DIMENSIONS This section includes mechanical dimensions of Expansion PCIe Card. Expansion PCIe Card Dimensions PCIe Card Height Limit

84 PRODUCT SPECIFICATIONS This section includes IKMH100 technical specifications. Appendix

APPENDIX B: PRODUCT SPECIFICATIONS Hardware Specifications Model Name IKMH100 System Specifications CPU Intel® Core™ i5-6200U 2.3 GHz, up to 2.8 GHz BIOS AMI UEFI BIOS Graphic Chipset Intel® HD Graphics 520 System Memory SODIMM DDR4L-2133 4GB, option up to 8GB (2 slots) Main Storage Default 2.5" 64GB SSD Second Storage (Optional) Internal mSATA 64-256 GB SSD Ethernet 1000 Base-Tx Gigabit Ethernet Compatible Audio Realtek ALC886 Codec Expansion Slot PCIe x4 / Expansion slot (Preliminary) I/O Interface Front I/O 1 x DC in 9-29V with isolation (Terminal Block 3pin) 2 x Giga LAN 4 x USB3.0 1 x HDMI Output 1 x D-Sub15 (VGA) Output 1 x RS232/422/485 selectable serial port 1 x Audio in Jack 1 x Audio out Jack Physical Buttons 1 x Reset Key 1 x Power Button Indicator Two 2.5” SSD indicators Power Supply Power Input 9-29V isolation DC in with protection Fuse Power Adapter 110-240 AC to 12V DC out 80W power Adapter Mechanical Specifications Housing Aluminum housing Mounting Desktop/Wall Mount (Optional Panel Mount with Front Display) Dimensions 276.4 (L) x 206.8 (W) x 60.2 (H)

86 Environmental Specifications Operating Temp. 0°C~+50°C Operating Humidity 30%-95% at 40 (non-condensing, RH) Optional Operating System Operating System Windows 10 IoT Enterprise Windows Embedded 8 Standard Windows Embedded Standard 7

New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: [email protected] Official website: www.winmate.com