NETGEAR JGS524FNA Installation Manual
Text of the manual
ProSafe 24-Port Gigabit Switch JGS524F
Step 2. Connect power
Step 3. Check status
Step 1. Connect equipment
JGS524F
Optional router
Computer
Server
Optional
modem
Internet
Installation Guide
Step 1. Connect equipment
On
Off
Power LED
Activity (blinking)
No link (off)
Link
Port Link/ACT LEDs
1000 Mbps
100 Mbps
Port Speed LEDs
JGS524F_IG_20Sept2012.fm Page 1 Thursday, September 20, 2012 10:28 AM
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Specifications
Specification
Description
Network interface
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Network cable
Category 5e (Cat 5e) or better Ethernet cable
Ports
24
Power adapter
100-240V @ 1.0A AC, 50/60 Hz internal universal power
supply
Power consumption
18.2W max
Weight
1.688 Kg (3.721 lbs)
Dimensions
(W x D x H)
328 mm x 169 mm x 43.2 mm
12.91 in. x6.65 in. x1.70in.
Operating
temperature
0–50° C (32–122° F)
Operating humidity
10%–90% relative humidity, noncondensing
Electromagnetic
compliance
CE Class A, FCC Class A, VCCI Class A,
C-Tick Class A, CCC
Safety agency
approvals
CE, Commercial UL listed (UL 60950-1), CB, KC, CCC
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
JGS524F_IG_20Sept2012.fm Page 2 Thursday, September 20, 2012 10:28 AM