Panasonic SC-BTT770 Easy Setting Manual

The order of setting Prepare the speakers Place the speakers Refer to the rear label of the speaker before connecting the corresponding cable. Verify the type of speaker with the label on the rear of the speaker. Speakers  Front speakers FRONT/AVANT Center speaker CENTER/CENTRE Surround speakers SURROUND/AMBIOPHONIE Blu-ray Disc TM Home Theater Sound System Model No. SC-BTT770 e.g., Prepare the speakers See below Place the speakers See below Connect the cables See over Turn on the system See over Easy setup See Easy setup screen Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line e.g., Front speaker Lch PUSH! Front speakers Surround speakers Center speaker Subwoofer STEP 3 STEP 4 STEP 1 STEP 2 WHITE White Blue line Back of the base Pull the cable straight along the line and slide into the groove. Tighten securely. Leave about 80 mm (3 5/32) Tighten securely. Press into the groove. Front speaker Stand Base speaker Lch WHITE Rch RED Rch GRAY GREEN PURPLE Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line Lch BLUE PUSH! GREEN C GRAY RS RED R WHITE L PURPLE SW BLUE LS Wireless system Surround speakers (LS, RS) Recommended Front speakers (L, R) 60 120 VQC8049_eng.indd 2-3 VQC8049_eng.indd 2-3 2011/02/18 11:38:24 2011/02/18 11:38:24

SURR       WIRELESS LINK POWER R6/LR6, AA   LAN LAN OK RETURN Easy setup Would you like to start easy setup? Voulez-vous amorcer le Réglage facile ? ¿Quiere empezar la Fácil Setup? No/Non/No Yes/Oui/Sí Connect the AC power supply cord to the main unit before connecting to the household AC outlet. AC power supply cord with a ferrite core is for the wireless system. Connect the cables by color or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. Be sure to use the speaker cables that have a large connector and short cable when you connect the surround speakers in this connection. Wireless system The main unit shows the model for the U.S.A. and Canada. PURPLE GREEN RED WHITE GRAY BLUE Connect the cables For detailed information, refer to the Owner’s Manual. It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. FM indoor antenna (supplied) Adhesive tape TV Turn on the system Connect the AC power supply cord 2 Turn on the TV Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit. If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and pictures with a single HDMI cable. If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable” or “Optical digital audio cable” is required to listen to sound from the TV. Broadband Network Connections By connecting this unit to the network, you can optimise the internet features of this unit. • Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. • When using the wireless LAN function, the LAN cable that connected to the main unit is not necessary. Main unit Internet Press [, ] to select [Yes/Oui/Sí] and press [OK]. Other connection Digital transmitter Press [ ] to turn on the main unit. Installing batteries in the remote control Press and ensure the WIRELESS LINK indicator lights up green. 4 The Easy setup starts The on screen display will guide you through the steps. Turn on the system Surround selector The surround selector switch must be set in the center position. Wireless system Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. *1 Make sure that this video connection is made to view photos/videos from the iPod/iPhone. Video cable*1 (not supplied) HDMI cable (not supplied) (Recommended for highest quality picture) Optical digital audio cable (not supplied) Audio cable (not supplied) LAN cable (not supplied) Broadband router, etc. If you have any questions contact U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Mon-Fri 9 am–9 pm (EST) Lunes-Viernes Sat-Sun 10 am–7 pm (EST) Sabado-Domingo Canada: Telephone: 1-800-561-5505 E-mail link: “Support  contact us  email” on www.panasonic.ca Insert fully until you hear a click. AC IN Main unit Wireless system To a household AC outlet AC Voltage selector (For units with PX printed on the packaging) Before connecting the AC power supply cord; Set the voltage at the bottom of the main unit. VOLT ADJ 110 127V 220 240V Use a fl at-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used. AC power supply cord (supplied) VQC8049_eng.indd 4-5 VQC8049_eng.indd 4-5 2011/02/18 11:38:25 2011/02/18 11:38:25