Rosslare AC-S73 Instruction Manual

04/02 AC-S73 Page 3 04/02 Contents Introduction....................................................... 5 Technical Specifications................................. 7 Key Features.................................................. 8 Installation ...................................................... 10 Mounting the AC-S73 Controller .................. 10 Wiring the AC-S73 ....................................... 11 Wiring Diagram ............................................ 13 Features and Concepts Normal, Secure, & Master Users.................. 14 Modes of Operation...................................... 16 Changing the Modes of Operation ............... 18 Request to Exit (REX) Function ................... 20 Case and Back Tamper ............................... 21 PC-15T Power Supply Unit .......................... 22 Programming the AC-S73 .............................. 23 Entering Programming Mode ....................... 25 Exiting Programming Mode.......................... 26 Changing Lock Strike Code 1....................... 27 Changing Lock Strike Code 2....................... 29 Changing the Programming Code................ 31 Changing the Normal / Secure Code ........... 32 Changing the Normal / Bypass Code ........... 33 Setting Fail Safe/Secure Operation.............. 34 Setting the Lock Strike Release Time .......... 34 Enrolling Primary & Secondary Codes ......... 36 AC-S73 Page 4 04/02 Deleting Primary & Secondary Codes.......... 41 Return to Factory Default Settings............... 44 Replacing a Lost Programming Code .......... 45 Replacing a Lost Normal / Secure Code...... 46 PC-15T / PS-A15T/ PS-B15T / PS-E15T / PS- F15T POWER SUPPLY INSTALLATION INSTRUCTIONS ...............................................47 INTRODUCTION & KEY FEATURES.......... 47 PS-15T WITH ENCLOSURES..................... 51 Glossary...........................................................55 Limited Lifetime Warranty ..............................60 Technical Support...........................................63 AC-S73 Page 5 04/02 Introduction The AC-S73 is a vandal resistant keypad access control unit suitable for external applications. The unit accepts up to 500 users and provides entry via the use of PIN codes. It is designed for high security applications, due to the fact that lock strike output and Request to Exit input are not located directly on the AC-S73, which eliminates the possibility of unauthorized entry to the restricted area. A specific Power Supply Unit, PC-15T, must be used in conjunction with the AC-S73. See page 47 for a detailed description of the PC-15T. Equipment Provided The following is provided as part of every AC-S73 package: • AC-S73 Access Control Unit. • Installation Kit • Installation and Operating Instructions AC-S73 Page 6 04/02 Additional Equipment Required Secured Power Supply PC-15T which connects to the following items: 1) Electric Lock Strike mechanism, which implements Fail Safe (Power to Lock) or Fail Secure (Power to Open) functions. 2) Request to Exit (REX) button Normally open type. Switch is closed when pressed. PC-15T provides bell function. Other Rosslare accessories can be found at Rosslare's Web Site: http://www.rosslare.com.hk AC-S73 Page 7 04/02 Technical Specifications Electrical Characteristics Operating Voltage Range: 12V DC Provided from Secure Power Supply (PC-15T) Maximum Input Current: Standby: Maximum: 15mA 92mA LEDs Two Tri-colored LEDs Communication C1, C2 Open collector 5V terminated Environmental Characteristics Operating Temperature: -25°F to 145°F (-31°C to 63°C) Operating Humidity: 0 to 95% (Non- Condensing) Suitable for outdoor use. (IP 65) Mechanical Characteristics Dimensions: 5.91"(150mm)L x 1.65"(42mm)W x 1"(27mm)D Weight: 0.9 lbs (400g) AC-S73 Page 8 04/02 Key Features Here are some of the AC-S73’s key features: • Bi-directional communication with PC-15T • Built in piezoelectric keypad for PIN code entry • Internal Buzzer • Comes with security screw and security screw tool • Two Status / Programming Interface LED's • Three User Levels � Normal User � Secure User � Master User • Three Modes of Operation � Normal Mode � Bypass Mode � Secure Mode • "Code Search" feature that helps make maintaining user codes easier. • Request to Exit (REX) signal from PC-15T � Comes with mounting template for easier installation. � Built in Case and Back Tamper • Bell feature is available with PC-15T. • Programmable Lock Strike Release Time AC-S73 Page 9 04/02 2 x 6 Matrix Keypad Case Screw 1 2 5 6 7 8 9 0 # 3 4 Door LED Mode LED Bell Button AC-S73 Page 10 04/02 Installation Mounting the AC-S73 Controller 1) Before starting, select the location to mount the AC-S73 controller. This location should be at shoulder height. 2) Drill holes into the back of the metal according to how you want to mount the AC-S73. For US Gang Box installation there are two hole indicators on the back of the metal cover specifically aligned for the US Gang Box. (Shown marked as ”A” in diagram below). A A CAUTION! DO NOT DRILL This is the Tamper Lens 3) Screw the AC-S73 back cover to its mounting location. 4) Wire the controller according the wiring instructions on the following page. 5) Return the front cover of the AC-S73 to the mounted back plate. AC-S73 Page 11 04/02 6) Secure the front cover by using the supplied security screw in the Installation Kit. An L-Shaped tool is provided for use when tightening the security screw. Wiring the AC-S73 The controller is supplied with a 16-inch pigtail, having a 4-conductor cable. To wire the Controller, perform the following steps: 1) Prepare the controller cable by cutting the cable jacket back 1¼ inch and strip the wire ½ inch. 2) Splice the controller pigtail wires to the corresponding devices and cover each connection. Refer to the wire color guide provided below and to the wiring diagrams provided on the following pages. Wire Color Guide Color Description RED V INPUT BLACK GROUND WHITE C1 GREEN C2 3) Trim and cover all conductors that are not used. AC-S73 Page 12 04/02 A typical wiring diagram is shown on the next page; for other wiring diagram examples refer to the support section of the Rosslare Web Site. http://www.rosslare.com.hk/support AC-S73 Page 13 04/02 Wiring Diagram Wiring diagram and schematic for the AC-S73. +V C1 C2 SECURED CONTROLLER N.C. N.O. REX. LOCK 12VDC VIN +BAT 16VAC 12VDC ROSSLARE PC-15T SPEAKER OUT OUTPUT LED OP-PSA12-V4 16V AC (1.5A, 25VA) Not provided in PS-E15T and PS-F15T 12V LEAD ACID BATTERY UP TO 7 AH RECOMMENDED AC-S73 +V C1 C2 N.C. N.O. FROM A TRANSFORMER (12 VDC @ 300mA) AC Mains (Black) ( ) White ( ) Green (Red) AC-S73 Page 14 04/02 Normal, Secure, & Master Users The AC-S73 accepts up to 500 users and provides entry via the use of PIN codes. Each user is provided with two code memory slots, Memory Slot 1 (Primary Code) and Memory Slot 2 (Secondary Code). The way in which the two memory slots are programmed determines a user’s access level and also determines the way in which the AC-S73 grants access in its three modes of operation. There are three user levels: Normal User A Normal User only has a Primary Code and is only granted access when the AC-S73 is in Normal or Bypass Mode. Secure User A Secure User must have a Primary and Secondary Code programmed; the two codes must not be the same. The Secure User can gain access when the AC-S73 is in any of its three modes of operation. In Normal Mode the Secure User must use their Primary Code to gain entry. In Secure Mode the Secure User must present both their Primary and Secondary Codes in order to gain entry. AC-S73 Page 15 04/02 Master User A Master User must have both Primary and Secondary Codes programmed with the same PIN code. The Master User can gain access during any mode of operation by presenting their PIN code to the controller. (The Master User is convenient but is less secure than a Secure User.) AC-S73 Page 16 04/02 Modes of Operation The AC-S73 has three modes of operation: 1) Normal Mode • MODE LED is green Mode Door GREEN Normal Mode is the default mode. In Normal mode the door is locked until a Primary Code is presented to the controller. Special codes such as Lock Strike Code 1 and Lock Strike Code 2 are active in Normal mode. (See pages 27-29 for more information on the Lock Strike Codes). 2) Bypass Mode • MODE LED is orange Mode Door ORANGE In Bypass Mode, access to the premises is dependent on whether the controller's Lock Strike Relay is programmed for Fail Safe Operation or Fail Secure Operation. When the Lock Strike is programmed for Fail Secure Operation, the door is locked until the doorbell button is pressed. When the Lock Strike is programmed for Fail Safe Operation, the door is constantly unlocked.

Mode Door RED Only Secure and Master Users can access the premises during the Secured Mode. A Secure User must enter their Primary and Secondary Codes to gain entry. After entering their Primary Code the Door LED will flash green for 10 seconds, during which the Secondary Code must be entered. A Master User only needs to present their PIN code once to gain entry. AC-S73 Page 18 04/02 Changing the Modes of Operation Changing from Normal Mode to Secure Mode The default factory setting for the Normal / Secure code is 3838. 1) Enter the 4-digit Normal / Secure code Mode Door GREEN • Mode LED will flash red Mode Door RED 2) Press the “#” key to confirm the mode change. • Mode LED is red Mode Door RED Changing from Secure Mode to Normal Mode The default factory setting for the Normal / Secure code 3838. 1) Enter the 4-digit Normal / Secure code. Mode Door RED • Mode LED will flash green Mode Door GREEN 2) Press the “#” key to confirm the mode change. • Mode LED will turn green Mode Door GREEN AC-S73 Page 19 04/02 Changing from Normal Mode to Bypass Mode See page 33 to create/modify the Normal / Bypass code. 1) Enter the 4 digit Normal / Bypass code. Mode Door GREEN • Mode LED will flash orange Mode Door ORANGE 2) Press the “#” key to confirm the mode change. • Mode LED will turn orange Mode Door ORANGE Changing from Bypass Mode to Normal Mode See page 33 to create/modify the Normal / Bypass code. 1) Enter the 4 digit Normal / Bypass code. Mode Door ORANGE • Mode LED will flash green Mode Door GREEN 2) Press the “#” key to confirm the mode change. • Mode LED will turn green Mode Door GREEN AC-S73 Page 20 04/02 Request to Exit (REX) Function The REX button is connected to the Power Supply Unit (PC-15T). The REX button must be located inside the premises to be secured and is used to open the door without the use of a PIN code. It is usually located in a convenient location, e.g. inside the door or at a receptionist's desk. The function of the REX button depends on whether the Lock Strike Relay is programmed for Fail Safe Operation or Fail Secure Operation. 1) Fail Secure Operation: From the moment the REX button is pressed, the door will be unlocked until the Lock Strike Release Time has passed. After this time, the door will be locked even if the REX button has not been released. 2) Fail Safe Operation: From the moment the REX button is pressed, the door will be unlocked until the REX button is released, plus the Lock Strike Release Time. In this case the Lock Strike Relay only begins its count down once the REX button has been released. AC-S73 Page 21 04/02 Case and Back Tamper If the case of the controller is opened or the controller is removed from the wall, a tamper event is triggered and a coded tamper signal is sent to the PC-15T Power Supply, or other compatible device, which will activate the siren. Clearing a tamper event is done by entering a valid Employee or Lock Strike Code that will open the Lock Strike Output in the current mode of operation. For example, while in Secure mode, using the Lock Strike Codes to clear tamper event will not work because the Strike Codes does not work in Secure mode. However, applying a Master Code or Secure Code will clear the tamper event in Secure mode. AC-S73 Page 22 04/02 PC-15T Power Supply Unit The PC-15T is designed for use with Rosslare's secured series, stand alone access control units, including AC-S73. It is designed to operate indoors and installed within the premises to be secured. The AC-S73 must be used with PC-15T, which provides its Lock Strike output, Request to Exit (REX) Input and Bell Function. Both units communicate through a proprietary Rosslare protocol, which provides a secure link between the controller and the power supply unit. This in turn activates the door unlocking. The PC-15T also functions as the power supply for the AC-S73. AC-S73 Page 23 04/02 Programming the AC-S73 Programming the AC-S73 is done solely via the unit's keypad driven Programming Menu System. To reach the Programming Menu System the AC-S73 must first be placed into Programming mode. See Entering Programming Mode on page 25 for more information. During the AC-S73's manufacturing process certain codes and settings are pre-programmed. These settings are the called the Default Factory Settings. The table below shows the names of all the AC-S73 Menus. It also shows of all the AC-S73’s default factory codes and settings. AC-S73 Page 24 04/02 Programming Menu Factory Settings Menu Description Menu Number 2580 Changing Lock Strike Code 1 1 0852 Changing Lock Strike Code 2 2 1234 Changing Program Code 3 3838 Changing Normal/Secure Code 4 N/A Changing Normal/Bypass Code 5 0004 Changing Door Release Time 6 Enrolling PIN Code 7 Deleting PIN Code 8 Return to Default Factory Setting 0 You will find a complete description and instructions for each of the above menu items on the following pages. AC-S73 Page 25 04/02 Entering Programming Mode 1) Press the “#” key two times within 2 seconds. • Mode LED will turn off • Door LED will turn red Mode Door RED 2) Enter your 4-digit Programming Code. 1 2 3 4 • If the Programming Code is valid the door LED will turn green and the AC- S73 will be in Programming Mode. Mode Door GREEN NOTE: • The AC-S73 must be in Normal Mode to enter the Programming mode. • The factory default Programming Code is 1234. • If a Programming Code is not entered within 5 seconds, the AC-S73 will return to Normal mode. AC-S73 Page 26 04/02 Exiting Programming Mode 1) To exit the Programming mode at any time: Press the “#” key two times within 2 seconds. • You will hear 3 beeps. • The Door LED will be off • The Mode LED will turn green • This indicates that the AC-S73 has returned to Normal mode. Mode Door GREEN 2) Wrong entries may reset the controller back to Normal mode. 3) While in Programming mode if no key is pressed for 1 minute the AC-S73 will exit Programming mode and return to Normal mode. 4) A short press on key may also return the system to Normal mode in certain Programming modes. AC-S73 Page 27 04/02 Changing Lock Strike Code 1 The Lock Strike Code 1 is mainly used as a method to quickly test the Lock Strike Relay during installation. The Default Factory Setting for the Lock Strike Code 1 is 2580. When the first user is added to the controller, the default Lock Strike Code 1 will automatically be deleted, ready for a new Lock Strike Code 1 to be re-entered. 1) Enter Programming mode Mode Door GREEN 2) Press “1” to enter Menu 1 • The Mode LED will turn red Mode Door RED GREEN 3) Enter the new 4-digit code you wish to set as Lock Strike Code 1. ? ? ? ? 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN AC-S73 Page 28 04/02 NOTE: • Lock Strike Code 1 does not function in Secure Mode. • Wrong entries will return the controller to Normal Mode. • Code 0000 will erase the Lock Strike Code 1. AC-S73 Page 29 04/02 Changing Lock Strike Code 2 The Lock Strike Code 2 is mainly used as a method to quickly test the Lock Strike Relay during installation. The Default Factory Setting for the Lock Strike Code 2 is 0852. When the first user is added to the controller, the default Lock Strike Code 2 will automatically be deleted, ready for a new Lock Strike Code 2 to be re-entered. 1) Enter Programming mode Mode Door GREEN 2) Press “2” to enter Menu 2 • The Mode LED will turn orange Mode Door ORANGE GREEN 3) Enter the new 4-digit code you wish to set as Lock Strike Code 2. ? ? ? ? 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN AC-S73 Page 30 04/02 NOTE: • Lock Strike Code 2 does not work in Secure Mode. • Wrong entries will return the controller to Normal Mode. • Code 0000 will erase the Lock Strike Code 2. AC-S73 Page 31 04/02 Changing the Programming Code 1) Enter Programming mode Mode Door GREEN 2) Press “3” to enter Menu 3 • The Mode LED will turn green Mode Door GREEN GREEN 3) Enter the new 4-digit code you wish to set as Programming Code ? ? ? ? 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN NOTE: Programming Code cannot be erased, i.e. the code 0000 is not valid and will not erase the Programming Code. AC-S73 Page 32 04/02 Changing the Normal / Secure Code 1) Enter Programming mode Mode Door GREEN 2) Press “4” to enter Menu 4 • The Mode LED will flash red Mode Door RED GREEN 3) Enter the new 4-digit code you wish to set as Normal / Secure Code ? ? ? ? 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN NOTE: Code 0000 will erase the Normal / Secure Code.

Code 1) Enter Programming mode Mode Door GREEN 2) Press “5” to enter Menu 5 • The Mode LED will flash orange Mode Door ORANGE GREEN 3) Enter the new 4- digit code you wish to set as Normal /Bypass Code ? ? ? ? 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN NOTE: Code 0000 will erase the Normal / Bypass Code. AC-S73 Page 34 04/02 Setting Fail Safe/Secure Operation Setting Tamper Siren Time Setting the Lock Strike Release Time 1) Enter Programming mode Mode Door GREEN 2) Press “6” to enter Menu 6 • The Mode LED will flash green Mode Door GREEN GREEN 3) Construct the 4-digit code using the instructions below: ? ? ? ? First Digit For Fail Secure Operation the first digit should be “0” For Fail Safe Operation the first digit should be “1” Second Digit Should be "0" Third and Fourth Digit Enter the number of seconds (from 1 to 99) that you want the Lock Strike to be released. AC-S73 Page 35 04/02 For example, 0012 means Fail Secure Operation, and a 12 second Lock Strike release time. 4) System returns to Normal mode • You will hear three beeps • The Door LED will turn off • The Mode LED will turn green Mode Door GREEN AC-S73 Page 36 04/02 Enrolling Primary & Secondary Codes Primary Codes • Primary Codes can only be enrolled to an empty User Slot, i.e. a slot where there is no existing Primary Code. • Primary Codes must be unique, i.e. one user’s Primary Code may not be the same as another users Primary Code. • Primary Codes cannot be the same as any system codes, such as the Normal / Secure Code or Lock Strike Code. • Users who hold a Primary Code can gain entry only during Normal mode. Secondary Codes • Secondary Codes can only be enrolled to User Slot that already has a Primary Code enrolled but no Secondary Code. • Secondary Codes do not have to be unique, i.e. multiple users can all hold the same Secondary Code. • Secondary Codes cannot be the same as any system codes, such as the Normal / Secure Code or Lock Strike Codes. • Users who hold Secondary Codes can gain entry in any Mode of Operation. AC-S73 Page 37 04/02 Enrolling Primary and Secondary Codes There are two methods to enroll Primary and Secondary codes, the Standard Method and the Code Search Method. a. The Standard Method is mainly used when the User Slot number for the user you wish to program is known. You can program both Primary and Secondary Codes using the Standard method. (See Enrolling Primary and Secondary Codes using the Standard Method - page 37.) b. The Code Search Method is mainly used when enrolling a user’s Secondary Code and the User Slot Code is unknown. The Code Search method only works if a user’s Primary Code is already enrolled but the Secondary Code is not. (See Enrolling Secondary Codes using the Code Search Method - page 39.) Enrolling Primary and Secondary Codes using the Standard Method 1) Enter Programming Mode Mode Door GREEN 2) Press “7” to enter Menu 7 • The Door LED will turn orange Mode Door ORANGE AC-S73 Page 38 04/02 3) Enter the 3-digit User Slot number between 001 to 500 that you wish to enroll a Primary or Secondary code to. For example, the User Slot 003 represents User #3. ? ? ? 4) • If the selected slot has no Primary Code, the Mode LED will flash green, indicating that the controller is ready to accept a Primary Code. Mode Door GREEN ORANGE • If the selected slot already has a Primary Code but no Secondary Code, the Mode LED will flash red, indicating that the controller is ready to accept a Secondary Code. Mode Door RED ORANGE • If the selected slot already has a Primary and Secondary Code, you will hear a long beep and the controller will return to Normal Mode. AC-S73 Page 39 04/02 5) Enter the 4-digit PIN that you want to assign as the Primary or Secondary Code for this slot number. If the PIN that is entered is valid the Mode LED will stop flashing and then the controller is ready for you to enter the next 3-digit slot number (refer to step 3) that you want to assign a code to, or press the “#” key to move to the next slot number (refer to step 4). If you do not wish to continue enrolling codes, press the “#” key twice and the controller will return to Normal mode. Enrolling Secondary Codes using the Code Search Method The Code Search feature enables you to quickly enroll a Secondary Code to a user who already has a Primary Code. 1) Enter Programming Mode Mode Door GREEN 2) Press “7” to enter Menu 7 • The Door LED will turn orange Mode Door ORANGE 3) Enter the 3-digit User Slot number 000 0 0 0 • The Door LED will flash orange Mode Door ORANGE AC-S73 Page 40 04/02 The controller is now waiting for the Primary Code of the User you want to add a Secondary Code to. 4) Enter the 4-digit PIN Code of the Primary Code belonging to the user you want to add a Secondary Code to. • The Mode LED will flash red Mode Door RED ORANGE If the Primary Code entered is not valid, you will hear a long beep and the AC-S73 will continue to wait for a valid Primary Code. 5) Enter the 4-digit PIN Code to be used as the Secondary Code. If the Secondary Code is valid the controller will beep three times and return to Normal Mode. If the Secondary Code is invalid the controller will sound a long beep and the AC-S73 will continue to wait for a valid Secondary Code to be entered. AC-S73 Page 41 04/02 Deleting Primary & Secondary Codes There are two methods to delete Primary and Secondary codes: the Standard Method and the Code Search Method. When deleting a User Slot, both the Primary Code and the Secondary code are erased. Deleting Primary and Secondary Codes using the Standard Method 1) Enter Programming Mode Mode Door GREEN 2) Press “8” to enter Menu 8 • The Mode LED will turn red Mode Door RED ORANGE 3) Enter the 3-digit User Slot codes you wish to delete. ? ? ? • The Mode LED will flash red Indicating the controller is waiting for the Programming Code to confirm the deletion. Mode Door RED ORANGE AC-S73 Page 42 04/02 If the User Slot is empty you will hear a long beep and the AC-S73 will return to Normal Mode. 4) Enter your Programming Code to confirm the deletion. ? ? ? ? If the Programming Code is valid, you will hear three beeps and the AC-S73 will return to Normal Mode. If the Programming Code is invalid, you will hear a long beep and the AC-S73 will return to Normal Mode. NOTE: It is recommended that a record be kept of added and deleted users so that it will be easier to keep track of which user slots are empty and which user slots are not. Deleting Primary and Secondary Codes using the Code Search Method 1) Enter Programming Mode Mode Door GREEN 2) Press “8” to enter Menu 8 • The Mode LED will turn red Mode Door RED ORANGE AC-S73 Page 43 04/02 3) Enter the 3-digit User Slot number 000 0 0 0 • The Door LED will flash orange Mode Door ORANGE RED The controller is now waiting for the Primary Code of the user you want to delete. 4) Enter the 4-digit PIN Code of the Primary Code belonging to the user you want to delete. ? ? ? ? • The Mode LED will flash red Mode Door RED ORANGE 5) Enter your Programming Code to confirm the deletion. If the Programming Code is valid, you will hear three beeps and the AC-S73 will return to Normal Mode. If the Programming Code is invalid, you will hear a long beep and the AC-S73 will return to Normal Mode. NOTE: It is recommended that a record be kept of added and deleted users so that it will be easier to keep track of which user slots are empty and which user slots are not. AC-S73 Page 44 04/02 Return to Factory Default Settings WARNING: You must be very careful before using this command! Doing so will erase the entire memory which includes all User and Special Codes, and return all codes to their factory default settings. 1) Enter Programming Mode Mode Door GREEN 2) Press “0” to enter Menu 0 • The Mode LED will flash red • The Door LED will flash red Mode Door RED RED 3) Enter your 4-digit Programming Code. ? ? ? ? • If the Programming Code is valid, all memory will be erased. You will hear three beeps and the controller will return to Normal Mode. • If the Programming Code is invalid you will hear a long beep and the controller will return to Normal Mode without erasing the memory of the controller. AC-S73 Page 45 04/02 Replacing a Lost Programming Code NOTE: The AC-S73 must be in Normal mode otherwise this will not work. Make sure that the Mode LED is green before proceeding. 1) Remove power from the Power Supply Unit (PC-15T). 2) Press the REX button on the Power Supply Unit (PC-15T). 3) Apply power to the unit with REX button pressed. 4) Release the REX button. 5) You now have 15 seconds to program a new Programming code into the Access Control unit using the initial default code 1234, before the controller reverts to the existing code. AC-S73 Page 46 04/02 Replacing a Lost Normal / Secure Code NOTE: The AC-S73 must be in Secure Mode otherwise this will not work. Make sure that the Mode LED is red before proceeding. 1) Remove power from the Power Supply Unit (PC-15T). 2) Press the REX Button on the Power Supply Unit (PC-15T). 3) Apply power to the unit with the REX button pressed. 4) Release the REX Button. 5) You now have 15 seconds to program a new Normal / Secure code into the Access Control unit using the initial default code 3838, before the controller reverts to the existing code. AC-S73 Page 47 04/02 PC-15T / PS-A15T/ PS-B15T / PS- E15T / PS-F15T POWER SUPPLY INSTALLATION INSTRUCTIONS INTRODUCTION & KEY FEATURES The PC-15T Power Supply is designed for use with all Rosslare secured series stand-alone access control units. The PC-15T contains two power supplies. One power supply is for the lock strike, the other is for the access control unit (ACU). The lock strike is attached directly to the power supply. This design isolates the lock from the ACU securing the functionality of lock even if the ACU is tampered with. When a valid code is entered at the ACU, the ACU communicates to the power supply using a Rosslare proprietary protocol sending a command to activate the lock. Similarly, the Release to Exit (REX) button is attached directly to the power supply, when the REX is pushed the power supply will communicate the REX request to the ACU and then the ACU will communicate back to the power supply to activate the lock strike. If the data line between the ACU and the power supply is cut, the system will immediately detect that the data line has been tampered with. AC-S73 Page 48 04/02 A sealed lead acid battery charger is built-in to provide back-up power for the ACU and the Lock Strike. The PC-15T can also power an external speaker that is controlled by the ACU to annunciate Bell, Chime and Siren tones. The PC-15T is also available in two steel enclosures. For more details on the models with enclosures, PS-A15T, PS-B15T, PS-E15T, and PS-F15 see page 51. ELECTRICAL SPECIFICATIONS AC Input: 16 ~ 18 VAC (1.5 A, 25 VA) DC Battery Charger: 12V DC Lead Acid Battery Up to 7AH recommended DC Input wired to backup battery terminals: 10 - 16 VDC Battery current draw depends on attached devices Lock Strike Output and Power Supply: 5 A Relay SPDT connection available via terminal blocks 12 VDC, constant voltage 1.2 A current limit

12 VDC, constant voltage 300 mA current limit Communications: Rosslare proprietary protocol Power LED & Speaker Output: Power LED indicator. 8 OHM, 0.25 W (Minimum) For bell, chime and siren alerts ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -10°C to 70°C (14°F to 158°F) Operating Humidity: 0 to 95% (Non-Condensing) MECHANICAL SPECIFICATIONS Weight: 59 grams (0.11 lbs) Dimensions: 77mm (3.0”) Length 57mm (2.2”) Width 33mm (1.3”) Depth AC-S73 Page 50 04/02 WIRING RECOMMENDATIONS Maximum distance between the Controller and the PC-15T is 50m (150ft). Lock wiring should be 20 Gage Communication wiring (C1 & C2) should be twisted Pair, 22 Gage, shielded or unshielded. PCB MOUNTING DIMENSIONS Dimensions for PCB mounting holes are provided below. 66mm (2.6”) 46mm (1.8”) AC-S73 Page 51 04/02 PS-15T WITH ENCLOSURES PS-A15T / PS-E15T The PS-A15T and PS- E15T enclosures include a built-in speaker and enough room for a CE or UL approved transformer. PS-A15T The PS-A15T comes with a built-in CE approved transformer. That is Class II Rated (Double insulated) and contains thermal fuse protection. Max: 125 C, 1A. See transformer specifications below: Input: Output: Certifications: Compliance: 230 VAC ~ 50Hz, 0.14 A 16 VAC ~ 1.5A, 25 VA CE A1:1998 EN 61558-1:1997 EN 61558-2-6:1997 AC-S73 Page 52 04/02 PS-E15T The PS-E15T is shipped without a transformer and is designed to be powered from an external transformer. When sold in the United States a UL approved transformer is recommended. The enclosure weight and dimensions are provided below: Dimensions: 182mm (7.2”) Length 80mm (3.1”) Width 68mm (2.7”) Depth Weight: 1.24Kg (2.7lbs) PS-A15T 0.63Kg (1.3lbs) PS-E15T PS-B15T / PS-F15T The PS-B15T and PS- F15T enclosures include a built-in speaker and enough room for a CE or UL approved transformer as well as a lead acid backup battery (up-to 7 AH). AC-S73 Page 53 04/02 PS-B15T The PS-B15T comes with a built-in CE approved transformer. That is Class II Rated (double insulated) and contains thermal fuse protection. Max: 125 C, 1A. See transformer specifications below: Input: Output: Certifications: Compliance: 230 VAC ~ 50Hz, 0.14 A 16 VAC ~ 1.5A, 25 VA CE A1:1998 EN 61558-1:1997 EN 61558-2-6:1997 PS-F15T The PS-F15T is shipped without a transformer and is designed to be powered from an external transformer. When sold in the United States a UL approved transformer is recommended. The enclosure weight and dimensions are provided below: Dimensions: 205mm (8.1”) Length 200mm (7.9”) Width 82mm (3.2”) Depth Weight: 1.24Kg (2.7lbs) PS-B15T 0.63Kg (1.3lbs) PS-F15T AC-S73 Page 54 04/02 Wiring Diagram Wiring Diagram and schematic for the PC-15T, PS-A15T, PS-B15T, PS-E15T, PS-F15T are provided below: +V C1 C2 SECURED CONTROLLER N.C. N.O. REX. LOCK 12VDC VIN +BAT 16VAC 12VDC ROSSLARE PC-15T SPEAKER OUT OUTPUT LED OP-PSA12-V4 16V AC (1.5A, 25VA) Not provided in PS-E15T and PS-F15T 12V LEAD ACID BATTERY UP TO 7 AH RECOMMENDED COMPATIBLE ROSSLARE CONTROLLER +V C1 C2 N.C. N.O. FROM A TRANSFORMER (12 VDC @ 300mA) AC Mains AC-S73 Page 55 04/02 Glossary A Access Control: Primarily refers to a device or set of devices controlling the entry of people traveling through a door or set of doors. B Back Tamper: The electronic tamper signal advising the controller that the controller has been removed from the wall. Bypass Mode: A Mode of Operation where door access is not restricted to valid users. In this mode the door may be released by anyone pressing the bell button. C Case Tamper: The electronic tamper signal advising the controller that the case has been opened. D Default Factory Setting: The settings that the controller is preprogrammed with when the controller is manufactured. Doorbell: The alert sound activated when the doorbell button on the AC-S73 is pressed. F Fail Safe: The system setting in which a total power loss leaves the connected door unlocked. AC-S73 Page 56 04/02 Fail Secure: The system setting in which a total power loss leaves the connected door locked. L Lock Strike: Term used for the electronic or electromagnetic door lock used for locking or unlocking the door. Lock Strike Code: The 4-digit code used to activate the Lock Strike Relay for testing purposes during installation. Lock Strike Release Time: The amount of time (user programmed) that the Lock Strike remains unlocked when a valid code is entered. M Master User: A user that has a Primary and Secondary Code, which are the same, and can gain access in any Mode of Operation. Mode of Operation: The state of operation of the controller. There are three "Modes": Normal Mode, Bypass Mode, and Secure Mode. N Normal Mode: The system setting (Mode of Operation) in which all valid users have access upon presenting a valid PIN Code (Primary Code). AC-S73 Page 57 04/02 Normal/Bypass Code: The 4-digit code used to change the controllers Mode of Operation from Normal to Bypass mode or vice versa. Normal/Secure Code: The 4-digit code used to change the controllers Mode of Operation from Normal to Secure mode or vice versa. Normal User: A user who only has a Primary Code and can only gain access in Normal mode. Normally Closed: A relay output from the controller that is activated (closed circuit) under normal conditions. Normally Open: A relay output from the controller that is de- activated (open circuit) under normal conditions. P Primary Code: The unique code issued to enable access in Normal mode. Users with only primary codes are Normal Users. Programming Code: The 4-digit code required when entering programming mode, deleting users, and resetting the AC-S73 to its factory default settings. Programming Mode: The mode used when programming the AC-S73' s system settings. AC-S73 Page 58 04/02 R Relay: An electronically controlled switch used for providing an Open Circuit or Closed Circuit output to external devices. REX: An abbreviation of Request To Exit. Request To Exit (REX): Refers to a button that can release the door from inside. Commonly located at the reception desk, or near a door as an emergency door release. S Secondary Code: An additional code issued to enable access in Secured Mode. Users with non-identical Primary and Secondary Codes are Secure Users. Users with identical Primary and Secondary Codes are Master Users. Secure Mode: The system setting (Mode of Operation) in which only valid Secure and Master Users have access upon presenting a valid code. Secure User: A user who has a Primary Code and Secondary Code that are non- identical, and can gain access in any Mode of Operation. Strike: See Lock Strike AC-S73 Page 59 04/02 T Terminal Block: The rectangular connectors on the PCB used to attach wiring from external devices. AC-015 Page 60 03/02 Limited Lifetime Warranty ROSSLARE ENTERPRISES LIMITED’S (Rosslare) LIMITED LIFETIME WARRANTY is applicable worldwide. This warranty supersedes any other warranty. Rosslare's LIMITED LIFETIME WARRANTY is subject to the following conditions: WARRANTY Warranty of Rosslare's products extends to the original purchaser of the Rosslare product and is not transferable. WARRANTY DURATION Rosslare warrants this product against defects in material and/or workmanship for the life of the product from the date of original purchase to the original purchaser. WARRANTY COVERAGE Rosslare will repair or replace, at its option, any product that under normal conditions of use and service proves to be defective in material or workmanship. No charge will be made for labor or parts with respect to defects covered by this warranty, provided that Rosslare does the work or a Rosslare authorized service center. This warranty does not cover expenses incurred in the transportation, removal or reinstallation of the product, whether or not proven defective. Replacement or repairs furnished under this warranty are subject to the same terms and conditions of the original warranty. AC-015 Page 61 03/02 EXCLUSIONS AND LIMITATIONS Specifically excluded from this warranty are failures caused by abuse, neglect, misuse, improper operation, normal wear, accident, improper maintenance or modification. This warranty does not cover repair or replacement where normal use has exhausted the life of a part or instrument. Service life of the product is dependent upon the care it receives and the conditions under which it has to operate. In no event shall Rosslare be liable for incidental or consequential damages. LIMITED LIFETIME WARRANTY TERMS The terms of this warranty may not be varied by any person, whether or not purporting to represent or act on behalf of Rosslare. This warranty represents the full extent of Rosslare's responsibility. Repair, replacement, or refund of the original purchase price, of the product is the exclusive remedy. This limited lifetime warranty is provided in lieu of all other warranties. All other warranties expressed or implied, including without limitation, implied warranties of merchantability and fitness for a particular purpose, are specifically excluded. In no event shall Rosslare be liable for damages in excess of the purchase price of the product, or for any other incidental, consequential or special damages, including but not limited to loss of use, loss of time, commercial loss, inconvenience, and loss of profits, arising from the installation, use, or inability to use such product, to the fullest extent that any such loss or damage may be disclaimed by law. This warranty shall become null and void in the event of a violation of the provisions of this limited warranty. AC-015 Page 62 03/02 PC15T Warranty The Manufacturer's warranty on this product is for a period of two years from the date of manufacture against defects in materials and workmanship. Manufacturer's warranty hereunder is limited to repair or replacement, at the manufacturer's sole option, if the product is found to be defective in normal use during the warranty period. The warranty is given in favor of the original purchase only. Subject to the above warranty, manufacturer's liability and that of it's distributors, re-sellers and agents and is wholly limited to the original purchase price and no payment will be made for related or consequential loss including but not limited to labor costs incurred in inspection, replacement or repair of defective products. This warranty is given expressly and in place of all other expressed or implied warranties of merchantability and fitness for a particular purpose and this warranty is the only warranty made by the manufacturer. No agent, representatives or employee of the manufacturer has the authority to waive, alter or add to the printed provisions of this warranty, to make representation of warranty not contained herein or to extend this warranty to anyone other than the original purchaser of the product. The PC-15T, PS-A15T, PS-B15T, PS-E15T, and PS-F15T are guaranteed against defects in workmanship and material for a period of 24 (Twenty Four) months from date of purchase. Return the faulty product with a dated proof of purchase to your dealer for replacement. - AC-015 Page 63 03/02 Technical Support International Web Site: http:///www.rosslare.com.hk/support/ Asia, Australia, & South America: Rosslare Enterprises Ltd. 905-912 Wing Fat Industrial Bldg., 12 Wang Tai Road, Kowloon Bay Hong Kong Tel: (852) 2795 5630 Fax: (852) 2795 1508 E-mail: [email protected] Europe, Russia, Middle East, Africa: Rosslare Security Products S.r.l Via F.lli Gabba 5, 20121 Milano, Italy Tel: (39) 0382 24800 Fax: (39) 0382 24800 E-mail: [email protected] [email protected] United States and Canada: Rosslare NAPDC 200 East Howard Street, Suite 238, Des Plaines, IL 60018 USA Tel: (847) 827 6330 Fax: (847) 827 6433 E-mail: [email protected]

www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk www.rosslare.com.hk 9J-IDR-052 / 0706-0820052-00