Pass XS PHONO Manual
Text of the manual
For your protection please read the following:
Water and moisture: Electrical devices should not be used near water ( as per example,
near a bathtub, washbasin, kitchen sink, laundry tub, wet basement or swimming pool ).
Care should be taken such that objects do not have the opportunity to fall, and that liquid
is never spilled onto or into the dev
1) Place the X Phono control anywhere you wish, keeping in mind that you will want the
s
wiring from the phono cartridge to the X Phono as short as possible.
s
2) Place the X power supply as distant from the control and any low level signal
s
components as is practical. Most low level components and their interconnects benefit
from electrica
Wayne Colburn and the Pass Labs team were allowed to build the most advanced, best
sounding phono-stage they could imagine; the phono-stage they all wished to have for
their own homes. The X Phono is the result of this ambitious effort.
s
The X Phono is a true "dual-mono" design, the only component shared between channels
s
other than casewo
you need to pay attention to something else or simply want to queue a recording silently.
Simply press the mute button. The blue
above the button indicating it is active
LED
The High Pass Filter can be left off for most recordings. When selected, the
LED directly
above the button will show blue, The High Pass Filter rolls off the low end response of
the X
