Time Guard TG24 Operating Instructions Manual
Text of the manual
O P E R A T I N G
I N S T R U C T I O N S
2 4 H O U R
S E G M E N T
T I M E S W I T C H
Cat No. TG24 (Single)
TG44 (Twin)
Time of day
pointer
ON segments
(pushed down)
Tough flame
retardant
casing
Time of day
setting ring
Appliance
socket
Time control segments 1 segment = 15 minutes
Push all segments downwards for ON, leave in
upward position for OFF.
TG24 (single) / TG44 (twin) 24 Hour
Seg
Programming the TG24/TG44
1
Decide what times you would like the TG24/TG44 to switch
ON and OFF.
2
Push all the segments downwards for the complete duration of an
ON period and leave them all in the upper position for an OFF
period (see diagram above left).
The minimum switching interval is 15 minutes and this can be
increased in 15 minute steps.
3
Bring t
Check that the TG24/TG44 gives the correct switching pattern by
turning the programme ring clockwise through a further 24 hour
cycle.
You will need to plug the TG24/TG44 into a live socket and plug
in an appliance such as a lamp (switched on) into the
TG24/TG44’s appliance socket to do this.
5
Turn the programme ring clockwise until the correct time of
