NEC NLT-26XT3 Operation Manual

NLT-32XT3 OPERATION MANUAL Please read this manual carefully before operation. NLT-26XT3

Important Safety Instructions.............................................................................................................3 Using the Remote Control.....................................................................................................................6 Batteries for Remote Control ..............................................................................................................6 Remote Control.............................................................................................................................................8 Controls of Front Panel..........................................................................................................................10 Controls of Back Panel...........................................................................................................................11 Operating Instructions ..........................................................................................................................12 Troubleshooting for Simple Failures .............................................................................................18 Product Specifications ............................................................................................................................................ 19 Wall Mounting Information/Technical Drawing.............................................................................. 20 NEC Service Centres.................................................................................................................................................... 21 Notice: All pictures in this manual are examples, only for reference, actual product may differ from the pictures. 2 .........................

many exciting and useful features to make your LCD TV viewing more enjoyable than ever before. Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD TV product, please read the following precautions carefully before using the product. 1. Read these instructions---All operating instructions must be read and understood before the product is operated. 2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference. 3. Heed all warnings--- All warnings on the product and in the instructions must be observed closely. 4. Follow all instructions---All operating instructions must be followed. 5. Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents. 6. Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective earthing connection. 7. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable unit. 8. Power cable protection --- Protect the power cable from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Apparatus should not be exposed to water and no objects filled with liquids, such as vases, should be placed on or near the apparatus. RISK OF ELECTRIC SHOCK. DONOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION This symbol indicates This symbol “dangerous voltage” indicates important inside the product that presents a risk of electric instructions shock or personal injury. accompanying product. IMPORTANT SAFETY INSTRUCTIONS 3 9. Power plug --- Do not tamper or modify the polarized or grounding-type plug. A grounding type plug has two third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Refer to the identification/rating label located on the back panel of your product blades and a third grounding prong. The wide blade or

10. The MAINS plug or an appliance coupler of the apparatus is used as the disconnect device, the disconnect device shall remain readily operable. 11. Overloading---Do not overload wall outlets, extension cables, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock and will void your warranty. 12. Entering of objects and liquids---Never insert an object into the product via the air vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or internal damage. For the same reason, do not spill water or liquid on the product. 13. Damage requiring service--- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as: a. When the power cable or plug is damaged. b. When a liquid is spilled on the product or when objects have fallen into or onto the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. If the product has been dropped or the cabinet has been damaged in any way. f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing. Warning: This unit should only be serviced by an authorized and properly trained technician. Opening the cover or other attempts by the user to service this unit may result in serious injury or death from electrical shock, and may increase the risk of fire and will void all warranties associated with this product. 14. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other dangers, plus, will void your warranty. 15. Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 16. Wall mounting--- For safety we recommend when mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 17. Stand--- Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. 18. Careful move--- When attempting to move the product use caution to avoid injury and or damage to product . Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. We recommend the use of 2 people to move the product 19. Lightning---For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. 20. Do not use this apparatus near water---for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. 4

naked flame sources, such as lighted candles, on or near the apparatus, this may cause fire hazard or electric shock and/or damage to product. 22. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 23.Ventilation---Do not block any ventilation openings. Install in accordance with the manufacturer instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings, insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. 24. Heat sources---Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat. 25. Using video games or any external accessory with fixed images for 10 minutes may cause them to be permanently imprinted on the SCREEN. ALSO, some network/program logos, phone numbers, teletext and images in 4:3 form-at etc. may cause similar damage. This damage is not covered by your warranty. 26. Panel protection---The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. In the case of a damaged panel as stated will not be covered by your warranty 27. Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.�� � 28. Working condition of the product: Temperature: 0�~40� Placing condition of the product: Temperature: -20�~50� 5 Warning: - The appliance is not intended for use by young children or infirm persons without supervision - Young children should be supervised to ensure that they do not play with the appliance - Avoid displaying fixed pattern in the monitor for long period of time to avoid image persistence

Objects between the remote control and sensor window may prevent proper operation. USING THE REMOTE CONTROL Note: the illustration is for your reference only, the remote sensor maybe located differently with different model. Cautions regarding use of remote control ��Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. ��Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit. ��The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window. BATTERIES FOR REMOTE CONTROL If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 Insert two size-AAA batteries. 3 Replace the cover until the lock snaps. ��Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. 6

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. ��Place batteries with their terminals corresponding to the (+) and (�) indications. ��Different types of batteries have different characteristics. Do not mix batteries of different types. ��Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals. ��Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. ��The batteries supplied with the product may have a shorter life expectancy due to storage conditions. If the remote control is not used for an extended period of time, remove the batteries from the remote control. ��Dispose of all unwanted and used batteries immediately after changing. 7

������������ Remote Control 8 1 2 3 4 6 5 8 9 7 10 11 12 12 15 16 17 20 21 24 25 14 19 18 23 22 26 13 Definition of the buttons on remote control: Number Button Name Function Description 1 【 】 Enter or quit the standby mode. 2 【RECALL】 The former channel can be restored if the last operation is changing channel；

2. Do not subject the remote control to impacts, water or disassembly. 3. When pressing the buttons on the remote control, allow interval of no less than one second between selections. 9 3 【ZOOM】 This button can be used for cycling among Full, ZOOM, Letter Box and 4:3 these four display mode. Note:at PC, the option available is Full and 4:3 4 Number buttons 【0-9】 In TV mode, these buttons are used for inputting the numbers of channels, also, by these buttons you can go back to TV mode when TV is in other modes. 5 Switch among the signal sources of TV, VIDEO,SVIDEO, YPBPR1,YPBPR2, VGA and HDMI. 6 【HDMI】 Shortcut key for entering into HDMI. 7 【MENU】 By pressing this button continuously, the menu can be displayed or disappeared, This button can be used to quit some operations too. 8 【P．MODE】 The button(s) can be used to select among four picture modes:Bright, User, Soft and Nature. 9 【S．MODE】 The button(s) can be used to select among four sound modes: Normal, News, Music and User. 10 【EXIT】 Key for quit the current operation interface. 11 【OK】 This is “enter button”. 12 【V+】/【V-】 In non-menu operation mode, the buttons are used to increase/decrease the volume; in menu operation mode, the buttons are used for function selection and operation; in mute mode, press button V+ to quit mute mode. 13 【P+】/【P-】 In TV mode, the buttons are used to increase/decrease the channel number for non-menu operation; for menu operation, the buttons are used to select the functions; in non-menu operation mode, the buttons can be used to restore to TV mode when the TV is in other mode. 14 【STILL】 The button(s) is (are) used to freeze or activate the current picture. 15 【DISPLAY】 This button is used to check the current mode which TV is working in. 16 【SLEEP】 These buttons are used to set the time to standby mode (namely, to set the time length from current time to standby mode). 【MUTE】 This button can be used to enter or quit mute mode. 17 18 【 】 Text, this button is used to enter or quit the Picture/Text mode. 19 【 】 Mix，this button is used to lapping over the Picture/Text and picture. 20 【 】 21 】 The button(s) can be used to switch among NICAM/IGR STEREO/MONO； Requests Index page when index link is valid. 22 【 】 Hold，holding the content of the Picture/Text. 23 【 】 Size，ZOOM mode for the Picture/Text . 24 【 】 Cancel，displays TV picture while maintaining TXT mode active. 25 【 】 Reveal，displaying the hidden information in the Picture/Text. Electronic Program Guide The keys with colors of red, green, yellow and blue in the picture. Colour Key 26 TEXT MIX 【 REVEAL S.PAGE HOLD SIZE CANCEL 【SOURCE】 Sub-code，sub-page of the Picture/Text.

- Here shown may be somewhat different from your set. POWER (r) switches the set On from standby or On to standby. CH+ / CH-(Programme Up/Down) Selects a programme or a menu item. Switches the set on from standby. VOL+ / VOL-(Volume Up/Down) Adjusts the volume. Adjusts menu settings. Infrared Receiver Window To receive the signal from remote control. Power Indicator Red indicator lighting, this means the TV is in standby mode; Green indicator lighting, this means the TV is in normal working condition; To receive the signal from remote control. Select TV,VIDEO,S-VIDEO,YPbPr1, YPbPr2,VGA,HDMI TV /AV Controls of Front Panel MENU TV/AV VOL+ VOL- CH+ CH- MENU selects a menu. Switches the set on from standby . 10 Power Indicator Infrared Receiver Window NOTE: During waiting period from STANDBY mode to ON mode, the LED will be flashing. Main power switch(for NLT-32XT3)

This set operates on an AC power. The volt- age is indicated on the Specifications page. Never attempt to operate the set on DC power. HDMI IN (DVI) SOCKETS Connect the set output socket of the equipment with HDMI output to this socket. VGA {1024X768(60Hz)/800X600(60Hz)/640X480 Connect the VGA signal of computer with this port by VGA cable, connect audio signal with VGA's audio input port by audio cable. VGA- AUDIO Port for VGA audio input COMPONENT1/2 IN (480i / 576i / 480p / 576p / 720p / 1080i) SOCKETS VIDEO IN SOCKET Connect the video out sockets of the VCR to AV sockets of the set. VIDEO OUT SOCKET Connect a second TV or monitor. This function will only works at TV, VIDEO and S-VIDEO. S-VIDEO IN Connect video out from an S-Video VCR to the S-VIDEO input. Connect the S-Video sound input socket of the VCR to component sound sockets of the set. SPDIF RF Aerial socket - Shown is a simplified representation of the set. - Here shown may be somewhat different from your set. Back panel Controls of 11 S-VIDEO (60Hz)/720X400(70Hz)} Port for TV audio output. Video in S-VIDEO Video in NLT-32XT3 NLT-26XT3 VGA Connection cannot display 50Hz signal. Main power switch(for NLT-26XT3)

Note: During waiting period from STAND BY mode to ON mode, the LED will be flashing. 12 P+ P- OK V+ P+,P-,V-,V+,OK V-,V+ V-,V+ P+,P- P+,P-,V-,V+ Please make sure the main power switch is in the "ON" position.

Hue Saturation 20 Hue Saturation 20 , "Saturation" Saturation Hue Saturation 20 4 4.1 "Hue" "Hue" 13 P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V+ V- V+ OK button V- V+

V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ NOTE: In VGA mode only "4:3" and "Full" are available.

15 V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ P+ P- V- V+ V- V+ P+ P- OK or V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+

set the Fine Tune function, the "AFT" item will become "Off" state automatically. Note: Australia is using B/G sound system. 16 V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ V- V+ P+ P- V- V+ OK or V+ P+/-

4.6 30 30 30 30 30 30 30 30 17 V- V+ P+ P- OK or V+ V- V+ P+ P- OK or V+ V- V+ V- V+ P- V- V+ P+ P- V- V+ V- V+ P+ P- OK or V+

with the technicians. Symptoms Possible Reason Solutions No picture, no sound, and no indicator light on 1.The power cord is not plugged in 2.The power is off 1.Plug the power cord in 2.Turn the power on Picture and sound with abnormality 1.Contrast, sharpness, and color temp are set improperly 2.Color system is set improperly 3.Sound s ystem is set improperly 1.Adjust the value of Contrast, sharpness, and color temp 2.Set the Color system to the country broadcasting standard 3.Set the Sound system to the country broadcasting standard Picture is spotted or with snow Signal source is low-grade or the signal cord is in a lower quality Use the qualified signal cord Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode. Adjust the value of contrast, brightness, color and volume No picture, no sound and indicator light is green The signal cable is not correctly connected. Connect the signal cable correctly Blue screen, AV or SVIDEO is displayed There is no signal input or the video cable is not connected or incorrectly connected Connect the video cable correctly Picture is unclear or shaking or with black horizontal strips (in VGA mode) VGA picture is not centered VGA picture is not correctly adjusted. Enter into “Display” menu, select “Auto Adjust” item to perform automatic calibration and adjust “Phase” to solve the problem No sound There is no audio signal input or audio cable is not connected correctly Connect the audio cable correctly VGA picture display with improper color The color temp is adjusted incorrectly by user Readjust the color temp, or select the original color setting HDMI source, with snow pixel of full screen The source generate is not standard Plug the HDMI cable again 1.Make sure the positive and the negative polarities are correct. 2.Check if there is a loose contact between the batteries and the springs exhausted The remote control does not work 3.Replace the batteries No sound or loud noise in TV source The TV signal is not standard or too weak Change the sound system in the Tune menu Picture color is abnormal Color system is setup incorrectly Change the color system in the Tune menu Troubleshooting for Simple Failures If you expect to leave your TV dormant for a long time(such as a vacation), it's a good idea to unplug the power cord to protect against possible damage from lightning or power surges. 18 Batteries are improperly installed or

TV receive system RF antenna input 75 Audio output Operation temperature Rated Power Consumption 2x5W Dimension with stand(mm) 814x625x280 0 C - 40 C Product Specifications 19 16 NLT-26XT3 NLT-32XT3 683x522x255 12 VGA Input (60Hz)/720X400(70Hz) 1024X768(60Hz)/800X600(60Hz)/640X480 100-240V 150W Stand by power consumption Panel resolution inports:TV,Video,Svideo,YPbPr1/2,VGA and HDMI External in/out ports 2W 1366X768 outports:Video,SPDIF Net weight(kg) Gross weight(kg) 15 20 814x574x114 683x491x91.5 Dimension without stand(mm) 120W PAL/SECAM; BG/DK/I

NEC understand that some user’s may wish to mount your LCD Television on the wall or to fixed sur- face. All NEC Models have this ability, however we strongly recommend that you have this procedure completed by a specialist installer. NEC will take no Warranty responsibility for product fault arising from incorrect installation / bracket failure. Please use the above measurements as a guide only and it is strongly suggested to hand measure the unit prior to installation. 20 *1 : Recommended screw diameter is M5X30. *2 : Maximum allowable projection of screw length inside the LCD TV is 20mm’s based on the length from the back cabinet to internal bracket NLT-26XT3 NLT-32XT3

NEC Australia Pty. Ltd. ABN 86 001 217 527 DISPLAY AND HOME GROUP NEC Australia Pty. Ltd. DISPLAY AND HOME GROUP 244 Beecroft Road EPPING 2121 Tel:131 632 Fax:(02) 9877 2353 NEC Service Centers New South Wales Sydney 184 Milperra Rd, Revesby 2212 131-632 Newcastle 120 Parry Street, Newcastle West 2302 131-632 Victoria Melbourne Unit 1/6 Garden Road, Clayton 3168 131-632 Queensland Brisbane Unit 4/305 Montague Road, West End 4101 131-632 Southport Shop 1,48 Ferry Road, Southport 4215 131-632 South Australia Adelaide 84A Richmond Rd, Keswick, 5053 131-632 Western Australia Perth 45 Sarich Court, Osborne Park 6017 131-632 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Center. PH:131-632 21