RFI FSA10-67-DIN Installation
Read Online
Read the RFI FSA10-67-DIN Installation online using the built-in PDF viewer.
Text of the manual
Before assembling your antenna please ensure that all the components below are included in the kit.
406-512 MHz
FSA10-67-DIN
SMD40-67-DIN
DIPOLE ASSEMBLY
QTY: 1
M-8570
FLAT SCREEN ASSEMBLY
QTY: 1
M6 BOLT ASSEMBLY
QTY: 2
M6X65 (2.5" LONG) HEX HD BOLT
M6 FLAT WASHER
M6 FLAT WASHER
M6 SPRING WASHER
M6 HEX NUT
M12 STUD ASSEMBLY
QTY: 4
M12X250MM (10" LONG)
THREADED ROD
M12NUT
M12 SPRING WASHER
M12 FLAT WASHER
LARGE CLAMP PLATE
QTY: 2
SMALL CLAMP PLATE
QTY: 1
INS-40079-1
©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 1 OF 4
FLAT SCREEN ASSEMBLY
M6 BOLT ASSEMBLY
SMD40-67
DIPOLE ASSEMBLY
SMALL CLAMP
PLATE
153 ±2 MM (6")
SET DIPOLE
TOP VIEW
FSA10-67-DIN
ANTENNA ASSEMBLY
STEP 1:
ASSEMBLE DIPOLE TO FLAT SCREEN AS PICTURED BELOW ENSURING THE DIPOLE TO SCREEN SPACING IS
SET CORRECTLY AND THE DIPOLE DRAINHOLE IS FACING DOWNWARDS. USING THE M6 BOLT ASSEMBLY
AND SMALL CLAMP PLATE INCLUDED IN THE KIT. TIGHTEN M6 BOLTS TO 10NM (7 lbf.ft)
STEP 2:
FIT THE M12 STUDS TO THE ANTENNA ASSEMBLY AS PICTURED, TORQUE TO 55NM (40 lbf.ft)
153 ±2 MM (6")
SET DIPOLE
DRAIN HOLE
POSITION
INS-40079-1
©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 2 OF 4
ASSEMBLY INSTRUCTIONS continued
STEP 3:
FIT THE CLAMP PLATES IN PLACE, TO ALLOW ATTACHMENT TO MOUNTING TUBE.
406-512 MHz
FSA10-67-DIN
LARGE CLAMP PLATE
M12 NUT
M12 SPRING WASHER
M12 FLAT WASHER
ANTENNA MOUNTING HARDWARE HAS BEEN
DESIGNED TO ACCEPT MOUNTING TUBE
DIAMETERS IN THE RANGE OF 50-75MM (2"-3").
MOUNTING TUBE LENGTH TO BE SIZED BY INSTALLER
TO SUIT INSTALLATION METHOD.
PLEASE NOTE: MOUNTING POLE NOT SUPPLIED
INS-40079-1
©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 3 OF 4
SCREENED ARRAY IS DESIGNED
TO FIX TO A TOWER MOUNTED POLE
OR TOWER LEG.
ENSURE THAT MOUNTING POLE,
CLAMPS AND MOUNTING STRUCTURE
IS APPROPRIATELY SIZED TO SUIT
LOCAL INSTALLATION WIND AND
ICE CONDITIONS.
SCREENED ARRAY
ASSEMBLY, FSA10-67-DIN
STRAIN RELIEVE FEED
CABLE BACK TO SUPPORT
STRUCTURE.
SEAL CONNECTOR WITH SUITABLE
SELF AMALGAMATING TAPE.
MOUNT POLE
TOWER
TOWER CLAMPS
OUTRIGGER
NOT SUPPLIED
WITH ANTENNA.
ASSEMBLY INSTRUCTIONS continued
TYPICAL INSTALLATION
INS-40079-1
©RF Industries Pty Ltd 2009
www.bird-technologies.com
PAGE 4 OF 4
