Panasonic CS-E9PB4EA Operating Instructions Manual

connectivity validity. Bedienungsanleitung Klimagerät 10-17 * Wenden Sie sich bei Fragen zur Gültigkeit der Konnektivität an Ihren Fachhändler. Handleiding Airconditioner 18-25 * Wij verzoeken u vriendelijk een geautoriseerde dealer advies te vragen over de aansluitmogelijkheden. Istruzioni di funzionamento Condizionatore d’aria 26-33 * Si prega di consultare un rivenditore autorizzato per la validità della connettività. Οδηγίες λειτουργίας Κλιματιστικό 34-41 * Συμβουλευτείτε τον εξουσιοδοτημένο αντιπρόσωπο για την καταλληλότητα της σύνδεσης. Comment utiliser l’appareil Climatiseur 42-49 * Consultez un revendeur agréé pour connaître la validité de la connectivité. Instrucciones de funcionamiento Climatizador de aire 50-57 * Consulte a un distribuidor autorizado para conocer la validez de la conectividad. Instruções de funcionamento Aparelho de ar condicionado 58-65 * Consulte o representante autorizado para validar a conectividade. Инструкции за работа Климатик 66-73 * Моля, обърнете се към оторизиран дилър относно валидността на връзките. Български Português Español Français Eλληνικά Italiano Nederlands Deutsch English Model No. Indoor Unit Outdoor Unit CS-E9PB4EA CS-E12PB4EA CU-E9PB4EA CU-E12PB4EA * Outdoor Unit Multi Split CU-2E15PBE CU-2E18PBE CU-3E18PBE CU-4E23PBE CU-4E27PBE CU-5E34PBE AMP Air Conditioning www.ampair.co.uk | [email protected]

Installation instructions attached. Before operating the unit, read these operating instructions thoroughly and keep them for future reference. The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement. Multi air conditioner system Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. • For complete product features, please refer catalogue. Indoor units • It is possible to operate the indoor units individually or simultaneously. The priority of operation is placed on the fi rst unit that turned on. • During operation, HEAT and COOL modes cannot activate at the same time for different indoor units. • The power indicator blinks to indicate the indoor unit is standing by for a different operation mode. Outdoor unit Indoor units Operation conditions Use this air conditioner under the following temperature range. DBT : Dry bulb temperature WBT : Wet bulb temperature CU-E9PB4EA, CU-E12PB4EA Indoor Outdoor DBT WBT DBT WBT COOL Max. 32 23 43 26 Min. 16 11 -10 - HEAT Max. 30 - 24 18 Min. 16 - -10 - Multi split outdoor unit CU-2E15PBE, CU-2E18PBE, CU-3E18PBE, CU-4E23PBE, CU-4E27PBE, CU-5E34PBE Indoor Outdoor DBT WBT DBT WBT COOL Max. 32 23 46 26 Min. 16 11 -10 - HEAT Max. 30 - 24 18 Min. 16 - -15 -16 AMP Air Conditioning www.ampair.co.uk | [email protected]

1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover TIMER SET CANCEL ON OFF 1 2 3 SET CHECK CLOCK RESET AC RC TIMER CANCEL ON OFF 1 3 SET CHECK RESET AC RC 2 3 1 Clock setting 1 Press CLOCK 2 Set the time 3 Confi rm 8m MODE POWERFUL/ QUIET TEMP OFF/ON TIMER SET CANCEL ON OFF 1 2 3 FAN SPEED SET CHECK CLOCK RESET AC RC FAN SPEED AIR SWING AIR SWING AUTO HEAT COOL DRY POWERFUL/ QUIET TIMER SET CANCEL ON OFF 1 2 3 FAN SPEED SET CHECK CLOCK RESET AC RC FAN SPEED AIR SWING AIR SWING AUTO HEAT COOL DRY 1 2 3 Basic operation 1 Select the desired mode DRY AUTO HEAT COOL 2 Start/stop the operation POWER • Please note that the OFF indication is on to start. 3 Select the desired temperature • Selection range: 16 °C ~ 30 °C. • Operating the unit within the recommended temperature may save energy. HEAT : 20 °C ~ 24 °C. COOL: 26 °C ~ 28 °C. DRY : 1 °C ~ 2 °C lower than room temperature. • To dim or restore the unit’s indicator brightness, press and hold for 5 seconds. • Use remote control within 8 m from the remote control receiver of the indoor unit. Table of contents Safety precautions ...................4-5 How to use...............................6-7 Cleaning instructions ..................8 Troubleshooting ..........................9 Information................................74 Accessories • Remote control • AAA or R03 batteries × 2 • Remote control holder • Screws for remote control holder × 2 AMP Air Conditioning www.ampair.co.uk | [email protected]

property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classifi ed as below: WARNING This sign warns of death or serious injury. CAUTION This sign warns of injury or damage to property. The instructions to be followed are classifi ed by the following symbols: This symbol denotes an action that is PROHIBITED. These symbols denote actions COMPULSORY. Air inlet Air inlet Air inlet Air inlet Air outlet Air outlet Air outlet Air outlet Indoor unit Remote control Power supply Outdoor unit WARNING Indoor unit and outdoor unit This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Please consult authorised dealer or specialist to clean the internal parts, repair, install, remove and reinstall the unit. Improper installation and handling will cause leakage, electric shock or fi re. Confi rm with authorised dealer or specialist on usage of any specifi ed refrigerant type. Using refrigerant type other than the specifi ed may cause product damage, burst and injury etc. Do not install the unit in a potentially explosive or fl ammable atmosphere. Failure to do so could result in fi re. Do not insert your fi ngers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. Do not expose yourself directly to cold air for a long period to avoid excess cooling. Do not sit or step on the unit, you may fall down accidentally. Remote control Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. Power supply Do not use a modifi ed cord, joint cord, extension cord or unspecifi ed cord to prevent overheating and fi re. AMP Air Conditioning www.ampair.co.uk | [email protected]

• Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord. If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualifi ed persons in order to avoid a hazard. It is strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to prevent electric shock or fi re. Stop using the product if any abnormality/failure occurs and disconnect the power plug or turn off the power switch and breaker. (Risk of smoke/fi re/electric shock) Examples of abnormality/failure • The ELCB trips frequently. • Burning smell is observed. • Abnormal noise or vibration of the unit is observed. • Water leaks from the indoor unit. • Power cord or plug becomes abnormally hot. • Fan speed cannot be controlled. • The unit stops running immediately even if it is switched on for operation. • The fan does not stop even if the operation is stopped. Contact your local dealer immediately for maintenance/repair. This equipment must be earthed to prevent electrical shock or fi re. Prevent electric shock by switching off the power supply: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. CAUTION Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front of the airfl ow outlet to avoid fi re propagation. Do not expose plants or pet directly to airfl ow to avoid injury, etc. Do not touch the sharp aluminium fi n, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the fl oor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not place a vase or water container on the unit. Water may enter the unit and degrade the insulation. This may cause an electric shock. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Remote control Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. • New batteries of the same type must be inserted following the polarity stated. AMP Air Conditioning www.ampair.co.uk | [email protected]

Auto OFF/ON button POWER (Green) TIMER (Orange) POWERFUL (Orange) QUIET (Orange) AUTO AIR SWING (Orange) Use when remote control is misplaced or a malfunction occurs. 1. Press the button once to use in AUTO mode. 2. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. 3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to use in normal COOL mode. 4. Repeat step 3. Press and hold the button until you hear 3 beeps, then release to use in forced HEAT mode. • Press the button again to turn off. Control Panel POWER (Green) TIMER (Orange) POWERFUL (Orange) QUIET (Orange) AUTO AIR SWING (Orange) OPEN CLOSE CLOSE OPEN POWER TIMER AIR SWING OFF/ON MODE To select operation mode AUTO - For your convenience • During operation mode selection the POWER indicator blinks. • Unit selects operation mode every 10 minutes according to setting temperature and room temperature. HEAT - To enjoy warm air • Unit takes a while to warm up. The POWER indicator blinks during this operation. COOL - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. POWERFUL/ QUIET To switch between powerful & quiet QUIET POWERFUL NORMAL POWERFUL: To reach temperature quickly POWERFUL Single • This operation stops automatically after 20 minutes. Multi • Press the button again or turn OFF the unit to stop this operation. QUIET: To enjoy quiet operation QUIET • This operation reduces airfl ow noise. Can be activated in all modes and can be cancelled by pressing the respective button again. Remote control receiver MODE POWERFUL/ QUIET TEMP OFF/ON TIMER SET CANCEL ON OFF 1 2 3 FAN SPEED SET CHECK CLOCK RESET AC RC AIR SWING FAN SPEED AIR SWING AUTO HEAT COOL DRY TEMP OFF/ON TIMER SET CANCEL ON OFF 1 2 3 CHECK CLOCK Remote control display Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Press to restore the remote control to default setting. Not used in normal operations. Single Single split system Multi Multi split system AMP Air Conditioning www.ampair.co.uk | [email protected]

(Remote control display) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. AIR SWING To adjust vertical airfl ow direction (Remote control display) • Keeps the room ventilated. • In COOL/DRY mode, if AUTO is set, the louver swings up/down automatically. • In HEAT mode, if AUTO is set, the horizontal louver is fi xed at the predetermined position. • Do not adjust the louver by hand. How to use To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. TIMER SET CANCEL ON OFF 1 2 3 AC C CANCEL 3 AC C 2 1 3 1 Select ON or OFF timer Example: OFF at 22:00 • Each time pressed: OFF Cancel 2 Set the time 2 3 Confi rm SET TIMER • To cancel ON or OFF timer, press ON or OFF to select respective or then press CANCEL. • If timer is cancelled manually or due to power failure, you can restore the timer again by pressing ON or OFF to select respective or then press SET . • The nearest timer setting will be displayed and will activate in sequence. • When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Quick guide. AMP Air Conditioning www.ampair.co.uk | [email protected]

Please consult authorised dealer. • Switch off the power supply before cleaning. • Do not touch the aluminium fi n, sharp parts may cause injury. • Do not use benzine, thinner or scouring powder. • Use only soap ( pH 7) or neutral household detergent. • Do not use water hotter than 40 °C. OPEN CLOSE CLOSE OPEN POWER TIMER AIR SWING OFF/ON 2 Slowly pull Slowly pull down the down the intake grille. intake grille. 3 Remove the air Remove the air fi lter from the fi lter from the tabs and pull it tabs and pull it downwards. downwards. 1 Press the knobs. Press the knobs. Remove Remove CLOSE OPEN OPEN CLOSE Remove Air Filter Knob Insert the air fi lter to the tabs of the intake grille. Slowly bring up the intake grille. Press the knobs to the CLOSE side. Air Filter Installation 1 2 3 INDOOR UNIT Wipe the unit gently with a soft, dry cloth. AIR FILTER Vacuum, wash and dry. • lt is recommended to clean the air fi lter every 6 weeks. • Do not operate without an air fi lter. • Wash/rinse the air fi lter gently with water to avoid damage to the air fi lter surface. • Do not dry the part with a hair dryer or a stove. • Replace any damaged air fi lters. For seasonal inspection after extended non-use • Checking of remote control batteries. • No obstruction at air inlet and air outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: COOL: ≥ 8 °C HEAT: ≥ 14 °C For extended non-use • Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. • Turn off the power supply. • Remove the remote control batteries. AMP Air Conditioning www.ampair.co.uk | [email protected]

Symptom Cause Mist emerges from indoor unit. • Condensation effect due to cooling process. Water fl owing sound during operation. • Refrigerant fl ow inside the unit. The room has a peculiar odour. • This may be due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic fan speed setting. • This helps to remove the surrounding odour. Airfl ow continues even after operation has stopped. • Extraction of remaining heat from the indoor unit (maximum 30 seconds). Operation is delayed a few minutes after restarting. • The delay is a protection to the unit’s compressor. Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes. TIMER indicator is always on. • The timer setting repeats daily once set. Indoor fan stops occasionally during heating operation. • To avoid unintended cooling effect. POWER indicator blinks before the unit is switched on. • This is a preliminary step in preparation for the operation when the ON timer has been set. Cracking sound during operation. • Changes of temperature caused the expansion/ contraction of the unit. Check the following before calling for servicing. Symptom Check Operation in HEAT/COOL mode is not working effi ciently. • Set the temperature correctly. • Close all doors and windows. • Clean or replace the fi lters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. • Check if the unit has been installed at an incline. • Close the intake grille properly. Remote control does not work. (Display is dim or transmission signal is weak.) • Insert the batteries correctly. • Replace weak batteries. The unit does not work. • Check if the circuit breaker is tripped. • Check if timers have been set. The unit does not receive the signal from the remote control. • Make sure the receiver is not obstructed. • Certain fl uorescent lights may interfere with signal transmitter. Please consult authorised dealer. NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY then please consult authorised dealer under the following conditions: • Abnormal noise during operation. • Water/foreign particles have entered the remote control. • Water leaks from Indoor unit. • Circuit breaker switches off frequently. • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. Cleaning instructions / Troubleshooting The unit stops and the TIMER indicator blinks. Use remote control to retrieve error code. TIMER SET CANCEL ON OFF 1 2 3 SET CHECK CLOCK RESET AC RC TIMER SET CANCEL ON OFF 1 3 SET CLOCK RESET AC RC Press for 5 seconds Press for 5 seconds to quit checking Press until you hear beep sound, then write down the error code Turn the unit off and reveal the error code to authorised dealer 2 1 3 4 • For certain errors, you may restart the unit for limited operation with 4 beeps when operation starts. AMP Air Conditioning www.ampair.co.uk | [email protected]

Panasonic Corporation Website: http://panasonic.net/ © Panasonic Corporation 2013 Authorised representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany AMP Air Conditioning www.ampair.co.uk | [email protected]