Q-Light SEDLR Operating Manual

Thank you for purchasing Q.Light product. Please read this manual carefully before installing this system for safe and long use of the product. ▪ Aluminum housing product with long shelf-life. ▪ Excellent in diffusing signal light by employing unique direct-diffusion system. ▪ Material : Lens-PC, Body-DIECAST AL, Horn Housing-SUS316L, Reflector-Heat Resisting ABS, Protection Cage(Option)-SUS316L ▪ RPM : 120-140/Min.(Controllable) ▪ Protection Class : IP56 ▪ Volume : SEDLR,SDLR:113-118dB(1m), SMDLR 115-120dB(1m) ▪ Protection Class : IP56 1) SEDLR ▪ Product Specification Model Rated Voltage Current Weight RPM Color DC12V 1.295A 3.09Kg DC24V 1.052A 3.09Kg AC110V 0.233A 3.86Kg SEDLR AC220V 0.111A 3.86Kg 120-140/Min. Green-R Amber-A Green-G Blue-B ▪ External View Drawing 2) SDLR ▪ Product Specification Model Rated Voltage Current Weight RPM Color DC12V 1.295A 3.36Kg DC24V 1.052A 3.36Kg AC110V 0.233A 4.13Kg SDLR AC220V 0.111A 4.13Kg 120-140/Min. Green-R Amber-A Green-G Blue-B ▪ External View Drawing 3) SMDLR ▪ Product Specification Model Rated Voltage Current Weight RPM Color DC12V 1.255A 5.91Kg DC24V 0.812A 5.91Kg AC110V 0.250A 6.68Kg SMDLR AC220V 0.145A 6.68Kg 120-140/Min. Green-R Amber-A Green-G Blue-B ▪ External View Drawing OPERATING MANUAL Heavy duty LED Revolving Warning Light with Phone

Sound CH Sound Tone Volume WS 5 Warning Sounds ch1 ch2 ch3 ch4 ch5 Fire A-ANG(Wail) Emergency WA-U(Yelp) Ambulance PI-PO(High-Low) Machinery Fault( PI-PI-PI-) Foam Release Alarm (PI~Continuous) 118dB 120dB(M) WP 5 Special Warning Sounds ch1 ch2 ch3 ch4 ch5 Fire A-ANG(Wail) Abandon Alarm Machinery Fault(PI-PI-PI-) Foam Release Alarm (PI~Continuous) General Alarm (Long PI~+ 7 Short PI.) 118dB 120dB(M) WM 5 Melodies ch1 ch2 ch3 ch4 ch5 Sweet Home For Elise Cuckoo’s Waltz Piano Sonata Turkish March 118dB 120dB(M) WA 5 Alarms ch1 ch2 ch3 ch4 ch5 Beep(Intermittent) Door Chime Phone Ring Machinery Fault(PI.PI.PI.PI.) Tripping Bead Sound 116dB 118dB(M) WV 3 Voice Signals ch1 ch2 ch3 Reproduction of Voice Recording 3 Channels 113dB 115dB(M) * dB with (M) is for SMDLR This product has a volume(1) for controlling revolving speed on assembling board. Refer to above structure drawing together with below drawing and explanation for right operating. 1) Lens(Protection Cage) Removal Remove Protection Cage② and Lens③ from the product by loosening bolt(M4-4EA)① and make sure assembling board④. 2) Revolving Speed Control ▪ The volume(1) for revolving speed control is built-in this product. Turn it closckwise for increasing revolving speed and turn it counterclockwise for decreasing revolving speed. ▪ If give excess power to the volume, it can be broken. Be careful ! 3) Lens(Protection Cage) Assembling Assemble the lens(or Lens and Protection Cage) in reverse order of separating. Refer to structure drawing together with below drawing and explanation for right operating. Phone control board has sound tone selection switch and volume controller. 1) Cover Removal Separate cover⑥ by loosening cover bolt M5 4EA⑤ on the box of phone control board. 2) Sound Tone Selection ▪ 5 Warning sound tones are built-in this product. In case of standard product, select preferable sound tone by using internal sound tone selection switch(S1). ▪ In case of LC Type(Custom-Made) product,refer to the explanation and drawing in article 7. 3) Volume(dB) Control ▪ Volume controller(S2) is built-in this product. Turn it clockwise for increasing volume or turn it counterclockwise for decreasing volume. 4) Cover Assembling Assemble the cover of phone control box in reverse order of separating.

explanation for right operating. 1) Terminal Box Cover Removal This product has terminal box for power line connection on the lower part of body. ▪ Remove cover⑧ and terminal box by loosening cover bolt(M5 4EA) ⑦. 2) Wiring Power Line ▪ Connet power line to terminal plate⑨. ▪ Treat the end of power cable by using “O” or “U” type terminal for safe wiring. ▪ In case of product using AC voltage, connect the line without polarity(wire color). ▪ In case of product using DC voltage, black line is negative(-). ■ Wiring for LC(External Contact) Type – Custome Made ▪ In case of LC type which selets sound tone by external contact, power line and signal line come out. Connect each line as below. ▪ Power Line : UL1015-NO.16(1.25sq) x 2C 400mm ▪ Signal Line : UL1007-NO.22(0.3sq) 400mm ▪ In case of product using AC voltage, do not allow power supply either to common line or to signal line.. 3) Treating Power Entry ▪ Keep the tightness of power entry⑩ by using water-proof connector(15C Nipple is supplied as a standard specification) or cable grand. ▪ Product can be damaged by water or dust if the cable entry is exposed outdoor without airtightening. 4) Terminal Box Cover Assembling Assemble terminal box cover in reverse order of separating. ▪ This product is water-proof and anti-corrosion type for outdoor use. But, install with vertical direction at a place or machine where exists no big vibration and no strong impact as long as possible. ▪ Refer to below information and drill necessary mounting holes on profitable part of the product. (Make sure PCD from external view drawing.) ▪ Fix the product by using mounting bolt(M8-4EA) for SEDLR & SDLR and another mounting bolt(M10-4EA) for SMDLR. ▪ This product is explosion-proof, water-proof and anti-corrosion type. When separate and assemble the product for wiring, repair or check, keep the airtightnees of the product by tightening each bolt and nut. ▪ If using voltage is seriously higher or lower than rated voltage, it can reduce the self-life of the product or can cause a problem on product operating. Make sure the using voltage does not exceed +/- 5% of the rated voltage. ▪ If lens or body of the product is contaminated by chemicals such as thinner, benzene, the product can be damaged, discolored or deformed. Please be careful. ▪ Keep airtightness of cable entry by using water-proof cable grand or water-proof connector. Product can be damaged by water or dust if the cable entry is exposed outdoor without airtightening ▪ Do not give strong impact to the product. It can be a reason of part(s) damage or short circuit. ▪ Do not strongly pull the wire out from the product. It can cause a disorder. (SEDLR/SDLR) (SMDLR)

LED is Partly Damaged Supplying Higher Voltage than Rated Voltage Making Sure Using Voltage Supplying Voltage Lower Than Rated Voltage Making Sure Using Voltage Feeble Lighting Low Revolving Speed Wrong Selecting Voltage Selection Switch to 220V (In Case of AC Type) Selecting Voltage Selection Switch to 110V Short Circuit of Sound Tone Signal Line Making Sure Wiring Double Sound Tone Problem with Sound Tone Selection Switch Contact Q.Light or Their Agent Wrong Wiring Making Sure Wiring No Sound Problem with Horn Contact Q.Light or Their Agent Wrong Wiring Making Sure Wiring Neither Lighting nor Revolving No Power Supply Making Sure Power Supply Q-LIGHT CO., LTD. http://www.qlightkr.com E-mail : [email protected] Seoul Office (Domestic Sales & A/S) Tel) 02-2679-6152 Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul Overseas Marketing Team / Plant Tel) 055-328-4082 Fax) 055-328-4083 Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si, KyungNam, Korea Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan