Abilia IRZ-REC4 Manual 

Manual How to program Control Omni with Andromeda IRZ-REC4, Andromeda Socket, Schneider Radio Pushbutton, Schneider Binary Adapter and Schneider Dimmer Adapter

1.1  Different steps ...................................................................................... 4 2 Before starting ........................................................................................... 5 2.1  Important issues .................................................................................. 5 2.2  Reset Andromeda IRZ-REC4 .............................................................. 5 2.3  Reset Schneider Radio Push Button ................................................... 6 2.4  Reset Andromeda Socket .................................................................... 6 2.5  Reset Schneider Binary Adapter and Schneider Dimmer Adapter ...... 6 3 Include all units to the Control Omni library ............................................... 7 3.1  Include Gewa Andromeda IRZ-REC4 .................................................. 7 3.2  Include Andromeda Socket .................................................................. 8 3.3  Include Schneider Binary Adapter ....................................................... 9 3.4  Include Schneider Dimmer Adapter ................................................... 10 3.5  Include Schneider Radio Push Button ............................................... 11 4 Set functions on a page in Control Omni ................................................. 12 4.1  Controlling an Andromeda receiver IRZ-REC4 .................................. 12 4.2  Controlling an Alert function in combination with Andromeda receiver IRZ-REC4 ................................................................................................... 15 4.3  Controlling an Andromeda Socket ..................................................... 17 4.4  Controlling a Schneider Binary Adapter ............................................. 19 4.5  Controlling a Schneider Dimmer Adapter .......................................... 21 5 Associate the Schneider Radio Push Button (double switch).................. 23

and receivers and make a network of them. 1.1 Different steps 1. Reset units 2. Include all units to Control Omni 3. Set functions on a Control Omni page 4. Associate other Z-wave transmitters Control Omni Gewa Andromeda IRZ-REC4 Schneider Binary Adapter and Dimmer Adapter Schneider Radio Push Button Andromeda Socket

2.1 Important issues  It is important to reset all the units before starting. See below how to do this.  Warning: Please make sure that the Schneider Radio Push Button is ALWAYS idle before starting a step. If not, you can get undefined behavior. You see that it is idle by looking at all LEDs, the one in this manual has 2 LEDs. They both should be unlit. That is, not green or red.  Control Omni must always be a Master unit, which means that all units must be included in the Control Omni library.  The relay units must be connected to power. 2.2 Reset Andromeda IRZ-REC4 Press the button Setting Press the button GR-Units Press the button Exclude GR-Unit Press the button Exclude GR-Unit

Do exactly the same as in section 2.2 but press one of the buttons 3 times. Be very distinct and do it quick. 2.4 Reset Andromeda Socket Do exactly the same as in section 2.2 but press the programming area 3 times. Note the red arrow. Be very distinct and do it quick. 2.5 Reset Schneider Binary Adapter and Schneider Dimmer Adapter Do exactly the same as in section 2.2 but press the programming area 3 times. Note the red arrow. Be very distinct and do it quick. Press 3 times on the programming button. Be very distinct and do it quick. The relay in Andromeda will click 3 times when success. Press the button as next picture

Control Omni must work as a master unit, which means that all units in the network must be included in the Control Omni library. 3.1 Include Gewa Andromeda IRZ-REC4 Name the unit and press the green symbol. Ready! Press 3 times on the programming button Press the button Setting Press the button GR-Units Press the button Include GR-Unit Press the button as next picture

Name the unit and press the green symbol. Ready! Press the button Setting Press the button GR-Units Press the button Include GR-Unit Press the button as next picture Press 3 times on the programming area.

Name the unit and press the green symbol. Ready! Press 3 times on the programming area. Press the button Setting Press the button GR-Units Press the button Include GR-Unit Press the button as next picture

Name the unit and press the green symbol. Ready! Press 3 times on the programming button Press the button Setting Press the button GR-Units Press the button Include GR-Unit Press the button as next picture

Name the unit and press the green symbol. Ready! Press 3 times on any button (quick) Press the button Setting Press the button GR-Units Press the button Include GR-Unit Press the button as next picture

4.1 Controlling an Andromeda receiver IRZ-REC4 For demonstrating this, a page is prepared in Control Omni which is called “Test page”. It is possible to make a button with a toggling function which means On/Off on the same button or with one button for On and one button for Off. In this example we make two buttons. Press the button Setting Press the button Send GR Press the button Environment Press the button Pages/Buttons Press the button Select page Press the button Function Select a button by pressing Edit button Select a page

GR-Unit Select the right unit. In this example the Andromeda receiver. Select channel, which is the same as relay 1-4 and press the green symbol. Select Basic ON. It is possible to test the function and after that, set the function to the button. Do you want to activate the function when you press or when you release the button? Select! Press the button Control Press the button Switch Binary

with the first button (On). Press button Done. Go on with the next button, the Off function. Start from the beginning of this section. After that you can go on and program other relays on Andromeda receiver.

Andromeda receiver IRZ-REC4 Press the button Setting Select System Select Alert function Select Send GR Select GR-Unit Press the button Change setting Select the right unit, (ID:10) Andromeda receiver Press the button Control

Switch Binary It is possible to test the function and after that, set the function to Alert. You are now ready with configuration. Press Done. Press the button Basic Press the button, Turn on Send GR. Select channel, which is the same as relay 1-4 and press the green symbol.

For demonstrating this we have prepared a page in Control Omni as we call “Test page”. It is possible to make one button with a toggling function, On/Off on the same button or with one button for On and one button for Off. In this case we make two buttons. Press the button Setting Press the button Send GR Press the button Environment Press the button Pages/Buttons Press the button Select page Select a button Select a page Press the button Function

GR-Unit Select the right unit. Select Basic ON It is possible to test the function and after that, set the function to the button. Do you want to activate the function when you press or when you release the button? Select! Press the button Control Press the button Switch Binary You are now ready with the first button (On). Press button Done. Go on with the next button, the Off function. Start from the beginning of this section.

For demonstrating this we have prepared a page in Control Omni as we call “Test page”. It is possible to make one button with a toggling function, On/Off on the same button or with one button for On and one button for Off. In this case we make two buttons. Press the button Setting Press the button Send GR Press the button Environment Press the button Pages/Buttons Press the button Select page Select a button Select a page Press the button Function

GR-Unit Select the right unit. Select Basic ON It is possible to test the function and after that, set the function to the button. Do you want to activate the function when you press or when you release the button? Select! Press the button Control Press the button Switch Binary You are now ready with the first button (On). Press button Done. Go on with the next button, the Off function. Start from the beginning of this section.

For demonstrating this we have prepared a page in Control Omni as we call “Test page”. This shows how to make buttons for dimming functions. Press the button Setting Press the button Send GR Press the button Environment Press the button Pages/Buttons Press the button Select page Select a button by pressing Edit button Select a page Press the button Function

GR-Unit Select the right unit. Set the level of light intensity. 0= Off, 99 = Max. light. It is possible to test the function and after that, set the function to the button. Press the button Control Press the button Switch Multilevel You are now ready with the first button (On). Press button “Done”. Do you want to activate the function when you press or when you release the button? Select! Go on with the next button, the Off function and after that make other buttons with different light level.

(double switch) Associate means to link other Radio transmitters with relay units. Note! The Schneider Push button is only able to control relay 1 in Andromeda IRZ-REC4 even if it has 2 buttons but it is possible to control another unit with button 2. Press the button Include GR-Unit Press Continue Press Control Press Association Press the button Setting Press the button GR-Units Press the button as next picture Press 3 times on any button (quick)

Phone +46 (0)8-594 694 00 | Fax +46 (0)8-594 694 19 | [email protected] | www.abilia.se Manual Control Omni Gewa Radio Ver D. Date: 2016-05-12 Select ID Group 1. Then press the green symbol. Select the GR unit you want to associate with. Press Associate now. Press 3 times on any button (quick). The LED will blink. Press the button as next picture. You are now ready with associating for the first button. Select the next button with ID group 3 if you want to control another unit, To go on with the next button, press Control or finish by pressing Done.