Novus AIRGATE-3G Operation & User’s Manual

Null Phone List Show the phone list in the Group. Null Add or remove the phone no.to/from group Click right arrow to add the phone no.to this group; Click left arrow to remove the phone no from group. Null 3.25 CONFIGURATION -> SMS This section allows users to set the SMS Notification and SMS Control parameters. SMS Item Description Default Send SMS on power up Enable to send SMS to specific user after router was powered up. Disable Send SMS on PPP connect Enable to send SMS to specific user when router PPP up. D ...

Item Description Default Enable SNMP Trap Click to enable SNMP Trap feature. Disable Version Select from “SNMPv1”, “SNMPv2” and “SNMPv3”. SNMPv2 Server Address Enter SNMP server’s IP address. Null Port Enter SNMP server’s port number 0 Name Enter SNMP server’s name. Null 3.23 CONFIGURATION -> EVENT This section allows users to set the Event parameters. Event Item Description Default Enable Event Click to enable Event feature. This feature is used to report AIRGATE-3G’s main running event to SNMP-TRAP or NovusLink. There are ...

Item Description Default DMZ DMZ host is a host on the internal network that has all ports exposed, except those ports otherwise forwarded. Null Enable DMZ Select to enable the DMZ function. Disabled DMZ Host Enter the IP address of the DMZ host which on the internal network. Null Source Address Set the address which can talk to the DMZ host. Null means for any addresses. Null To add a rule you must click on Add button and fill the fields. Virtual IP Mapping@ NAT/DMZ Item Description Default Virtual IP for Router Set a Virtual IP for router. ...

4.1 INTERFACE 4.1.1 CONSOLE PORT 4.1.2 DIGITAL INPUT 4.1.3 DIGITAL OUTPUT User can use the console port to manage the router via CLI commands, please check section Introductions for CLI. There are two digital inputs of AIRGATE-3G, it just support dry contact (do not supports wet contact). Please check the connector interface of AIRGATE-3G, you can find out “V-” easily at one of the pin of power input connector. Import note: do not connect In1/In2 and Slide switch directly to “GND” of the terminal block, or DI will not wor ...

The router can be configured through your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc. The product provides an easy and user-friendly interface for configuration. There are various ways to connect the router, either through an external repeater/hub or connect directly to your PC. However, make sure that your PC has an Ethernet interface properly installed prior to connecting the router. You must configu ...

Use 2 pcs of M3 screw to mount the router on the wall. Or mount the router on a DIN rail with 3 M3 screws. 2.7 INSTALL SIM CARD AND MICRO SD CARD  Inserting SIM Card or Micro SD Card 1. Make sure power supply is disconnected. 2. Use a screwdriver to unscrew the screw on the cover, and then remove the cover, you could find the SIM Card slots and the Micro SD slot. 3. Insert the SIM card or Micro SD card, and you need press the card with your fingers until you hear “a cracking sound”. Then use a screwdriver to screw the cover. ...