KStar UDC9101S One Operation & User’s Manual

 For terminal-type input or outputs, please follow below steps for the wiring configuration: a) Remove the small cover of the terminal block b) Suggest using AWG14 or 2.1mm2 power cords for 3KVA (200/208/220/230/240VAC models). c) Upon completion of the wiring configuration, please check whether the wires are securely affixed. d) Put the small cover back to the rear panel. Step 3 Communication connection Communication port: To allow for unattended UPS shutdown/start-up and status monitoring, connect the communication cabl ...

Typical recharge time(standard modle) 4 hours recover to 90% capacity (Typical) Charging voltage 27.4 VDC ±1% 41.0 VDC ±1% 27.4 VDC ±1% 41.0 VDC ±1% 54.7 VDC ±1% 82.1 VDC ±1% 54.7 VDC ±1% 82.1 VDC ±1% 82.1 VDC ±1% 109.4 VDC ±1% 82.1 VDC ±1% 109. 4 VDC ±1% Charge current 1A or 2A 12A max, can be setting by LCD 1A or 2A 12A max, can be setting by LCD 1A or 2A 12A max, can be setting by LCD SYSTEM FEATURES Overload @35℃ Line Mode Battery Mode Ambient Temp.<35℃ 105%~110%: UPS ...

Typical recharge time(standard modle) 4 hours recover to 90% capacity (Typical) Charging voltage 27.4 VDC ±1% 41.0 VDC ±1% 27.4 VDC ±1% 41.0 VDC ±1% 54.7 VDC ±1% 82.1 VDC ±1% 54.7 VDC ±1% 82.1 VDC ±1% 82.1 VDC ±1% 109.4 VDC ±1% 82.1 VDC ±1% 109. 4 VDC ±1% Charge current 1A or 2A 12A max, can be setting by LCD 1A or 2A 12A max, can be setting by LCD 1A or 2A 12A max, can be setting by LCD SYSTEM FEATURES Overload @35℃ Line Mode Battery Mode Ambient Temp.<35℃ 105%~110%: UPS ...

（1）LED（from�right� � to�left:�“alarm”,�“bypass”,�“battery”,�“inverter”);� （2）On-Line�UPS�LCD�display;（3）Function�keys   LED Indicator Indicator Description � Red� � On� � � � The�UPS�has�an�active�alarm�or�fault.� � � Yellow� The�UPS�is�in�Bypass�mode.� On� � � � The�UPS�is�operating�normally�on�bypass� during�High�Efficiency�operation.� � Yellow� � On� � � � The�UPS�is�in�Battery�mode.� � � Green� ...