Summit FS408BL Owner's Manual

Important Safeguards ......................................................................................................... 1 - 2 Location of Parts ..................................................................................................................... 3 Technical Information .............................................................................................................. 4 Installation Instructions ....................................................................................................... 4 - 6 Before Using Your Freezer ....... ...

Temperature Control:  The temperature control is located at the rear bottom corner of the freezer.  When you turn the unit on for the first time, set the control to its maximum position, 6, using a coin or flathead screwdriver.  The range of the temperature control is from position 1 (warmest) to 6. After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs. A setting of 3~4 should be correct for home or office freezer use.  To turn the appliance off, you must unplug it. NOTE: If the unit is unplugged, has lost power, or ...

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words ”DANGER” or “WARNING”. DANGER means that failure to heed this safety statement may result in severe personal injury or death. WARNING means that failure to heed this safety statement may res ...

enclosed spaces. When placing your unit, make sure you allow adequate airflow around it, at least 4” on both sides, at the back and at the top.  Use two or more people to move and install the freezer. Failure to do so can result in back or other injury.  To ensure proper ventilation for your freezer, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected fro ...

Cleaning Your Freezer: 1. Unplug the freezer and remove the food and drawers. 2. Wash the inside surfaces with a solution of warm water and baking soda. The solution should contain about 2 tablespoons of baking soda to a quart of water. 3. Wash the drawers with a mild detergent solution. 4. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. 5. Wring excess water out of the sponge or cloth before cleaning the area of the temperature control or any electrical parts. CAUTION: Failure to unplug the unit could ...