Linear AM-KP Installation Instructions

AE2000Plus, and AM3Plus access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy- to-read yellow graphics. Each key has a positive tactile “click” feel when pressed. An internal sounder signals when a key is pressed. The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate. An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions. The AM-KP is normally powered from the controller, or can be powered locally from a 12 VDC power supply. Robust static and lightning protection circuits safeguard the keypad’s electronics. A rotary switch selects the keypad’s PBUS device address. Each PBUS device connected to the controller must be set to a different PBUS device address. 1. AM-KP FEATURES 2. PLAN INSTALLATION 3. MOUNT BACKPLATE 4. ROUTE CABLE * 5 6 7 8 9 0 # 1 2 3 4 NIGHT LIGHT YELLOW "LOCKOUT" INDICATOR RED/GREEN POWER/ACCESS INDICATOR TACTILE KEYPAD POWER/DATA TERMINALS PBUS DEVICE ADDRESS SELECTOR (1-6) SOUNDER KEYLOCK LOBBY ACCOUNTING SERVICE SALES COMPUTER ROOM V.P. V.P. SALES PURCH. ENGINEERING BATH BATH STOR. COPIER AREA CHIEF ENG. LAB PRESIDENT CONTROLLER COMMERICAL INSTALLATION AM-KP ACCESS KEYPADS CARD READERS (USING AM-CRI INTERFACE) APARTMENT GATE INSTALLATION PLAN THE LOCATIONS FOR CONTROL AND REMOTE DEVICES AM-KP ON PEDESTAL CONTROLLER PLAN CABLE RUNS BETWEEN CONTROL AND REMOTE DEVICES APARTMENTS * 5 6 7 8 9 0 # 1 2 3 4 PEDESTAL MOUNT BACKPLATE WITH SECURITY BOLTS AND LOCKNUTS USE CONCRETE WEDGE ANCHORS OR MOLLY ANCHORS WALL MOUNTING CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN SYSTEM CABLE RUN CABLE TYPE FORMULA 300 FEET MAXIMUM BELDEN 9931 (24 AWG) WEICO 9405 (20 AWG) EACH AM-KP KEYPAD EQUALS 9 LOAD UNITS FEET x LOAD UNITS < 3,000 MAXIMUM FEET x LOAD UNITS < 10,000 MAXIMUM 500 FEET MAXIMUM HOMERUN WIRE EACH KEYPAD (1000 FEET WIRE MAXIMUM ALLOWED IN SYSTEM)

211560 E 5. CONNECT CABLE 6. SET PBUS DEVICE ADDRESS 7. SECURE & LOCK CASE FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND) NOTE: CONTROLLER MUST BE CONNECTED TO AM-KP "GND" AM-KP FOLLOW THIS WIRING DIAGRAM TO CONNECT THE KEYPAD TO THE CONTROLLER AM-KP TERMINALS PCLK DVAL DAT0 DAT1 GND PWR GND DAT1 DAT0 DVAL PCLK PWR ACCESS CONTROL SYSTEM PBUS TERMINALS USE A SMALL SCREWDRIVER TO SET THE PBUS DEVICE ADDRESS SWITCH EACH PBUS DEVICE MUST BE SET TO A UNIQUE NUMBER FROM 1 TO 6 ARROW ON SLOT POINTS TO NUMBER HOOK KEYPAD ONTO BACKPLATE USE KEY TO LOCK KEYPAD 8. PROGRAM SYSTEM 9. TEST KEYPAD LINEAR LIMITED WARRANTY This Linear product is warranted against defects in material and workmanship for twelve (12) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profi t, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties for fi tness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of all other warranties express or implied. All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Services at 1-800-421-1587 for an RPA# and other important details PROGRAM THE CONTROLLER TO CONFIGURE THE REMOTE RECEIVER REFER TO THE CONTROLLER PROGRAMMING INSTRUCTIONS FOR DETAILS * 5 6 7 8 9 0 # 1 2 3 4 RED INDICATOR SHOULD TURN GREEN AND PROGRAMMED RELAY IN THE CONTROLLER SHOULD ACTIVATE