Olympus PS100 - Photo Printer - 50 Sheets Quick Start Manual

P-S100 Digital Photo Printer OK OK PRINT SEL.PRINT EXIT PC / PRINTER GO SELECT PC OK For printing, a paper-in tray and a ribbon cartridge are required (both supplied, as well as commercially available as replacements). Thank you for purchasing this OLYMPUS Digital Photo Printer P-S100. This guide contains instructions for using this printer with other Olympus Dock&Done products. For details on operations and settings, refer to the supplied user’s manual For inquiries, contact the OLYMPUS service center listed in the user’s manual. Your new life of photography has begun. What is QDock&Done? Dock&Done is a total digital photography system that puts personal imaging into a single process. For example, by simply setting the digital camera on the cradle, new pictures are saved, photo printing is prepared, and the camera’s batteries are recharged. a Set the print order (DPOF) for the image fi les to be printed on the digital camera. b Connect the USB cable to the cradle of the digital camera. c Connect the AC adapter and the power cord, then turn on the printer. d Set the digital camera on the cradle. e On the digital camera, select “PRINT” from the “PC/PRINTER” menu, then press the 9 button. Image fi les with print orders are printed. QDock&Done printing Digital Camera Print with a PictBridge-compatible camera QDock&Done-compatible digital camera QDock&Done-compatible digital camera and storage unit* Print directly by QDock&Done Digital Photo Printer PC Regular printing * Sold separately Printer setting Setting the paper-in tray a Open the ribbon cartridge door. Setting the ribbon cartridge b Remove slack from the ribbon. If the ribbon cassette has been used before, take in any ribbon slack before loading. c Insert the ribbon cartridge into the printer following the direction of the arrow, and then close the ribbon cartridge door completely. • Push the cartridge until it clicks. • If the ribbon cartridge door cannot be closed completely, take out the ribbon cartridge and then reinsert it. Go to “Printing with the PictBridge-compatible camera” for PictBridge printing. Go to “Printing with a PC” for PC printing. Connecting with a Dock&Done-compatible digital camera Tips • If you do not set the print order, select “SEL.PRINT” to set printing in the PictBridge mode. • For details on the print order (DPOF), refer to the reference manual supplied with the digital camera. Tip Availability of these models may vary from country to country. User registration To stay informed of important updates and news regarding your Olympus product, it is recommended to register your purchase. You can register by one of the following ways: • Register online Install the software from the supplied CD-ROM. When restarting your computer after installation, the registration screen appears. • Use the registration card* Fill out the supplied registration card, and return it by mail. Open the paper-in tray door and insert the paper-in tray all the way. • Push the paper-in tray until it clicks into place. • When closing the paper-in tray door, push the paper-in tray door tab in as you close the door until it clicks into place and locks. * Not provided in some areas.

857C087-20 PC DOCK OK STORING ONLY EXIT 20SEC. TILL AUTO-STORE STORE PRINT DOCK MODE STORE SEL. PRINT OK GO SELECT RESTART CANCEL DOCK MODE SUSPEND PC Lower the shutter Printing On the digital camera, select the desired item from the “QDOCK MODE” menu. A Press the a/c button to select the desired item. “STORE : PRINT” Stores only the newly taken image fi les of the digital camera, and print the image fi les with the print order. “STORING ONLY” Stores only the newly taken image fi les of the digital camera. “STORE : SEL. PRINT”* Stores only the newly taken image fi les of the digital camera, and the print setting screen appears. “EXIT” Closes the “QDOCK MODE” menu without storing or printing. * This is for PictBridge mode. For details on the print settings, refer to the reference manual supplied with the digital camera. Tips • “STORE : SEL.PRINT” is not available if print orders of image fi les are set. • The storage unit starts storing image fi les automatically if no menu operation is performed within 20 seconds. a Press the 9 button on the digital camera during printing. The confi rmation screen appears. Use the USB cable supplied with the digital camera for connection. a Connect the digital camera to the printer. Cancel automatic print b Select “CANCEL,” then press the 9 button. Printing is canceled, and the digital camera turns off automatically. Tip If you select “RESTART,” printing will restart. Printing with a PictBridge-compatible camera b Control print operations using the digital camera. Tip For details on PictBridge, refer to the instruction manual supplied with the digital camera. Use a commercially available USB cable (A-B type, less than 3 m (9.8 ft.)). Connect your PC to the printer. Printing with a PC Tip For details, refer to the user’s manual supplied with the printer. Dock&Done-compatible camera Another PictBridge-compatible camera Connecting the Dock&Done-compatible digital camera to the storage unit a Set the print order (DPOF) for the image fi les to be printed on the digital camera. b Connect the printer and the storage unit with the Dock&Done cable KP16 (sold separately), connect the AC adapter and the power cord to the printer, then turn the printer on. c Dock the cradle of the digital camera to the storage unit. d Turn on the storage unit, then set the Dock&Done/PC mode switch to “QDOCK.” e Set the digital camera on the cradle. The “QDOCK MODE”menu is automatically displayed on the camera screen. Tip For details on connections, refer to the user’s manual supplied with the storage unit. PRINT SEL.PRINT EXIT PC / PRINTER GO SELECT PC Dock&Done-compatible digital camera screen Sample digital camera screen QDock&Done storage connector Lift the shutter 9 button ac buttons Lower the shutter B Press the 9 button.