Laser DAB-DG200 Quick Start Manuals

For further product information and instruction please visit our product web page at www.laserco.net

EVERYDAY FEATURES TURNING THE UNIT ON (1) Extend the antenna and press the ON/OFF button. (2) The unit will then conduct a full auto- search scan and store all DAB/DAB+ Radio stations. The auto search may take up to 1- 2 minutes to complete. (3) The unit is then ready to use. 1) 2) 3) MANUAL STATION SCANNING To manually change frequency, press or to change in 0.05MHz steps. To start auto-scanning, press and hold the SCAN button. 1) CHOOSING A STATION When the auto searching is complete, you can change stations by pressing or . 1) USING THE DISPLAY BUTTON To view further station information, just press the DISPLAY button each time to show 1) Radio station name, 2) Frequency, 3) Signal transmission rate and mode, 4) Signal strength, 5)Time, 6) Scrolling station data, and 7) Radio Program Type 1)

SWITCHING BETWEEN FM AND DAB+ While enjoying a DAB/DAB+ program, you can simply press DAB/FM to change Modes 1) PRE-SETTING FAVOURITE CHANNES This radio can store 10 DAB/DAB+ and 10 FM station presets. To store the current station (1) press and hold the PRESET button. Then press or and SELECT your preferred channel number. (2) A confirmation screen will then be shown 1) 2) SELECTING A PRESET STATION To recall your list, press PRESET. Press or to review and press SELECT to confirm. SETTING LANGUAGE/FACTORY RESET Note: Changing language is also accompanied with a factory reset, which means all personal settings will be deleted. (1) Press MENU repeatedly until “Language” is shown. Press SELECT to confirm. Press or to select from the list. (2) Press SELECT to confirm your preference. The system will then reset and restart. 1) 2) What’s in the box: 1 DAB+ Radio, 1 Power Adaptor, 1 Quick Start Guide

For further product information and instruction please visit our product web page www.laserco.net