Itek I60018CD Safety & Instruction Manual

MAX Output: DC 9V 1A Radio FM Bandwidth: 87.5-108 MHz DOCUMENTATION We declare that this product conforms to the following product legislation in accordance with the following directive(s): 2014/30/EU Electromagnetic Compatibility Directive. 2014/35/EU Low Voltage Directive. 2011/65/EU Restriction of Hazardous Substances Directive. 2014/53/EU Radio Equipment Directive. RK Wholesale LTD Quality Assurance, United Kingdom WARRANTY This product is guaranteed for 12 months from the date of original purchase. If any defect arises due to faulty materials of workmanship, the faulty products must be returned to the place of purchase. Refund or replacement is at the discretion of the retailer. The following conditions apply: • The product must be returned to the retailer with proof of purchase. • The product must be installed and used in accordance with the instructions contained in this instruction guide. • It must be used only for domestic purposes. • It does not cover wear and tear, damage, misuse or consumable parts. • RK Wholesale LTD has limited liability for incidental or consequential loss or damage. • This guarantee is only Valid in the UK and Eire Only.

See back page for details. PRODUCT SAFETY When using any electrical appliance, basic safety precautions should always be followed including the following: • Check that the voltage of the main circuit corresponds with the rating of the appliance before operating. • Please ensure that the appliance is used on a stable, level, and heat resistant surface. • DO NOT immerse cords, plugs or any part of the appliance in water or any other liquid. • DO NOT leave the appliance unattended while it is operating. • Close supervision is necessary when any appliance is used by or near children or pets. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children shall not play with the appliance. • Cleaning and user maintenance shall not be made by children without supervision. • Switch off at the wall socket then remove the plug from the socket when not in use or before cleaning. • If the supply cord or appliance is damaged, stop using the appliance immediately and seek advice from the manufacturer or its service agent or a similarly qualified person. • DO NOT let the cord hang over the edge of a table or counter or let it come into contact with any hot surfaces. • The use of accessory attachments is not recommended by the appliance manufacturer, apart from those supplied with this product. • DO NOT pull the plug out by the cord as this may damage the plug and/or the cable. HIGH VOLTAGE CLASS 1 LASER

anything other than its intended use. • This appliance is for household use only. • DO NOT carry the appliance by the power cord. • DO NOT use the appliance outdoors. • DO NOT use in direct sunlight. • DO NOT use in wet or damp conditions. • DO NOT sit the product on or near sources of electromagnetic pollution, vibration or where the ventilation is poor as this may cause damage to the product or could interfere with other products. • DO NOT place containers filled with water or any other liquid on the top of the product as this may damage the product. • When handling electrical items ensure that your hands are dry. • Never disconnect the plug by pulling the power cable as this may damage the plug and/or socket. • If water has entered the body of the product please switch off at the wall socket and then consult a qualified electrician for an inspection and /or repair. • Should the product malfunction due to electrostatic discharge, switch off at the wall socket and allow 30 minutes for the charge to dissipate before reconnecting the power supply. • Ensure that there are no metallic objects placed in the internal space of the product as this may damage the product and cause a risk of electric shock to the user. • In the unlikely event the appliance develops a fault, stop using it immediately and seek advice from the Customer Support Team. Battery Safety Always: • Ensure the battery compartment is secured. • Only use the recommended batteries. • Ensure the correct batteries are placed into the battery compartment. Observe the plus and minus marks on both the battery and the compartment.

batteries at one time. • Store unused batteries in their packaging and keep away from metal objects that may cause a short circuit. • Remove dead batteries from the equipment. • Remove batteries from the remote control if it is not to be used for a long time. • Remember to keep button cell and batteries away from children as they can easily be swallowed. • Seek medical attention immediately if batteries are swallowed. Never: • Dispose of batteries in a fire. • Attempt to recharge ordinary batteries. WHAT’S IN THE BOX Instruction Manual 3.5MM AUX in cable Adaptor Speaker body Remote Control Main Unit 1. CD Tray 2. LCD Display 3. Control Panel 4. LED Lights 5. Speakers 6. AUX in jacks/DC in jack (not shown) Control Panel 1. Power/Mode 2. LCD display 3. Remote control sensor (IR) 4. LED ON/OFF 5. Play/Pause 6. Stop 7. Skip backward 8. Skip forward 9. Volume – 10. Volume + 11. AUX in jack Rear Panel 1. FM antenna 2. DC input socket 6 2 3 4 5 1

11. Volume - 12. Volume + BEFORE YOUR FIRST USE: 1. Remove the product from the box. 2. Remove any packaging from the product. 3. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. 4. Your appliance is now ready for normal use. Dispose of the packaging in a responsible manner. USING THE REMOTE CONTROL TO OPERATE THE UNIT: Aim the remote control directly at the remote control sensor (IR) on the front panel. Don’t put any objects between the remote control and the system while operating the unit. BATTERIES: 1. Slide out the battery holder from the remote control case. (Push tab “A” towards the middle first, see diagram). 2. Place one 3V CR2025 (Lithium) battery into the battery holder, observing the polar marking. If the battery is placed incorrectly, the remote control will not work. Dispose of the old battery properly. Do not leave it lying around where a you child or pet could play with or swallow it. 3. The battery may explode or leak if it is mistreated. Do not attempt to recharge it or disassemble it. Do not dispose of the old battery in a fire. 4. Insert the battery holder into the battery compartment. NOTE: Please remove all the batteries to prevent damage or injury from battery leakage if the unit will not be used for a

specified size and type of battery. USING YOUR APPLIANCE: • Connect the included mains power adaptor into the DC input socket on the back of the jukebox and then plug the adaptor into the main power supply. • To turn the jukebox on, press and hold the Power/Mode button on the control panel or press the Standby button on the remote control. • Short press the Power/Mode button on the control panel or use the Mode button on the remote control to move between the CD,BT,FM , or AUX in mode. • Adjust the volume using the Volume+ and Volume- buttons on the remote control or by pressing the Volume+ and Volume- buttons on the control panel. • Switch the LED lights on or off by pressing the LED ON /OFF on the control panel or by pressing the LED ON/OFF button on the remote control. • Set the jukebox to standby on the control panel or by pressing the Standby button on the remote control.

Short press to switch between CD,BT,FM and AUX in mode. Play/Pause Press once to play, press again to pause playback. Stop Stops playback. Skip forward Press once to skip to the next track or chapters forward. Skip backward Press once to skip to the previous track or chapters backward. Volume – Press to decrease the volume. Volume + Press to increase the volume. CD PLAYER: 1. Short press the Power/Mode button on the control panel or use the Mode button on the remote control to select the CD function. The LED screen will display ”cd”. 2. Press the Play/Pause button on the remote or control panel to begin CD playback. 3. Adjust the volume using the Volume+ and Volume- buttons on the remote control. 4. Use the Skip forward and Skip backward buttons to skip tracks. Repeat: Press the repeat button during playback to select a repeat function. Press repeat once to repeat 1 track. Press the repeat button twice to repeat all tracks. Press the repeat button three times to turn off repeat. CD Programming: Up to 20 tracks can be programmed in any order. Before attempting to program, press the Stop button. 1. Make sure the CD function has been selected and CD playback has been stopped using the Stop button. 2. Press the program button. 3. Select the track you wish to program using the skip buttons. 4. Once the required track has been selected, press the program button to store the track or song into memory. 5. Repeat steps 3 & 4 to store additional songs or tracks into memory. 6. When all the desired songs or tracks have been programmed, press the Play/Pause button to play the songs/tracks in the new assigned order. 7. Press the Stop button to stop programmed playback. 8. Remove all programmed memory by pressing the stop button repeatedly. Playing the FM radio: 1. Press the Power/Mode button on the control panel or press the “MODE” button on the remote repeatedly until you have selected FM mode. 2. Ensure the FM Antenna has been fully extended. 3. Press the “Skip forward” and “Skip backward” to select the desired FM radio station. 4. Press and hold the Skip forward” or “Skip backward” to scan the radio

scanning once it picks up a radio station and save. 5. Long press the Play/Pause button to scan the radio station and save. 6. You can also press the Prog button on the remote control to save a radio station after scanning. 7. Press the Stop button play a previously saved radio station. Bluetooth: 1. Press the Power/Mode button on the control panel or press the “MODE” button on the remote repeatedly until the “bt” shows on the LED screen. The LED will flash until a device has been paired with speaker. 2. Pair the bluetooth enable device with your jukebox by selecting “I60018CD” from the listed devices on your smart phone/tablet. when pairing successful ,the LED icon“bt” will light up and will hear “DU” sound. 3. You can now play or skip songs using your Bluetooth device , remote control or jukebox control panel. AUX-IN: Requires a 3.5 mm cable (included). 1. Connect a 3.5 mm cable to the AUX- in 1 jack. Connect the other end of the 3.5 mm cable to a smart-phone or other audio source. 2. Press the Power/Mode button on the control panel or press the “MODE” button on the remote repeatedly to select AUXin mode. 3. You can now play or skip songs using your Bluetooth device. Changing LED light: 1. To turn the LED lights on , press once LED ON/OFF button on the remote , to turn the lights off , press again the LED ON/OFF button . 2. Long press the LED ON/OFF button on the control panel to turn the LED lights on and off. TROUBLESHOOTING The following checks will assist in the correction of most problems which you may encounter with your set. Before going through the check list below, first check the following points: The power cord must be connected firmly. Should any problem persist after you have made these checks consult your nearest dealer. Problem Possible Causes and Solutions The jukebox has no power. Ensure that the adapter has been properly connected. Check that the jukebox has been switched on at the mains power supply. The jukebox is not playing sound. Check that the volume level is set at an audible level and adjust accordingly. Unable to pair a Bluetooth device. Check if the device is compatible with the jukebox and ensure the Bluetooth function on your device is switched on. The jukebox may not be set to the correct mode. Press the source button to select the Bluetooth function – when the Bluetooth indicator light is flashing, search for ‘I60018CD’ on your device. The remote control is not working. The battery may be exhausted. Replace with a new battery. Make sure the remote is pointed at the jukebox during use.

distorted. The volume or bass level may be too high. Reduce the volume and/or bass levels to increase sound clarity. Note: The normal function of the product may be disturbed by strong Electro- Magnetic Interference. If so, simply reset the product to resume normal operation. If the issue continues, please move the product to another location. CLEANING & CARE Cleaning the Jukebox: • Always disconnect the equipment from the power supply before cleaning. • Clean the equipment with a soft, damp, lint free cloth. • Do not use abrasives or harsh cleaners. DISPOSAL OF THE UNIT Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle-more.co.uk or www.recyclenow.co.uk

recycling of electrical items. Please visit www.weeeireland.ie for access to information about the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life. NOTES WARNING: DO NOT IMMERSE ANY ELECTRICAL PART OF THE APPLIANCE IN WATER SUCH AS MOTOR UNITS OR PLUGS. PLEASE SEE CLEANING SECTION FOR FURTHER INSTRUCTIONS.