iDataLink Maestro RR Install Manual

are the properties of their respective owners. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. HOW TO USE THIS INSTALL GUIDE 1 2 3 SELECT VEHICLE PRINT PAGES NEEDED

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA 4 RUNNER WITh JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 1

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 1 H H BACKUP CAM BACKUP CAM MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT IF EQUIPPED CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 WIRING DIAGRAM with an Amplifier YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) STEP 1 WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA 4 RUNNER WIThOUT JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 2

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 2 H H BACKUP CAM BACKUP CAM YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA AvALON WITh JBL 2015-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 3

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 3 H H BACKUP CAM BACKUP CAM NOT CONNECTED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE WIRING DIAGRAM with an Amplifier CONNECTION NOT REQUIRED CONNECT IF EQUIPPED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP STEP 1 YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA AvALON WIThOUT JBL 2015-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA CAMRy WITh FACTORy 6.1" SCREEN 2012-2014 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera: Cut the reverse camera plug of the TO2 T-harness and connect the wires as indicated in the wiring diagram next page (BROWN/RED and BROWN/YELLOW wires are not used). STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 5

Automotive Data Solutions Inc. © 2018 4 2 3 1 4 5 6 7 8 10 9 13 12 11 15 14 16 AUX IN AUX IN A G F A F G 5 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE YELLOW WHITE RED BLACK BLACK BLUE/YELLOW BLACK ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED CUT REVERSE CAMERA CONNECTOR FROM TO2 T-HARNESS AND CONNECT WIRES AS SHOWN. YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA CAMRy WITh FACTORy 6.1" SCREEN AND JBL 2012-2014 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera: Cut the reverse camera plug of the TO2 T-harness and connect the wires as indicated in the wiring diagram next page (BROWN/RED and BROWN/YELLOW wires are not used). STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 6

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN 2 3 1 4 5 6 7 8 10 9 13 12 11 15 14 16 A G F A F G 6 H H BACKUP CAM BACKUP CAM YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES RCA CABLES STEP 1 STEP 4 WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO WIRING DIAGRAM with an Amplifier CONNECTIONS NOT REQUIRED WITH AMP NOT CONNECTED CONNECTION NOT REQUIRED YELLOW WHITE RED BLACK BLACK BLUE/YELLOW BLACK FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 WIRES FROM VEHICLE STEP 5 MAESTRO RR MODULE DATA CABLE CUT REVERSE CAMERA CONNECTOR FROM TO2 T-HARNESS AND CONNECT WIRES AS SHOWN. CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA CAMRy WITh FACTORy SCREEN AND hDD AND JBL 2012-2014 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera: Cut the reverse camera plug of the TO2 T-harness and connect the wires as indicated in the wiring diagram next page (BROWN/RED and BROWN/YELLOW wires are not used). STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 6

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN 2 3 1 4 5 6 7 8 10 9 13 12 11 15 14 16 A G F A F G 6 H H BACKUP CAM BACKUP CAM YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES RCA CABLES STEP 1 STEP 4 WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO WIRING DIAGRAM with an Amplifier CONNECTIONS NOT REQUIRED WITH AMP NOT CONNECTED CONNECTION NOT REQUIRED YELLOW WHITE RED BLACK BLACK BLUE/YELLOW BLACK FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 WIRES FROM VEHICLE STEP 5 MAESTRO RR MODULE DATA CABLE CUT REVERSE CAMERA CONNECTOR FROM TO2 T-HARNESS AND CONNECT WIRES AS SHOWN. CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA CAMRy WITh JBL 2015-2017 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 3

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 3 H H BACKUP CAM BACKUP CAM NOT CONNECTED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE WIRING DIAGRAM with an Amplifier CONNECTION NOT REQUIRED CONNECT IF EQUIPPED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP STEP 1 YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA CAMRy WIThOUT JBL 2015-2017 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA COROLLA WITh FACTORy 6.1" SCREEN 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA hIGhLANDER WITh JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 3

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 3 H H BACKUP CAM BACKUP CAM NOT CONNECTED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE WIRING DIAGRAM with an Amplifier CONNECTION NOT REQUIRED CONNECT IF EQUIPPED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP STEP 1 YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA hIGhLANDER WIThOUT JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA RAv 4 WITh FACTORy 6.1" SCREEN 2013-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA RAv 4 WITh FACTORy 6.1" SCREEN AND JBL 2013-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 3

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 3 H H BACKUP CAM BACKUP CAM NOT CONNECTED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE WIRING DIAGRAM with an Amplifier CONNECTION NOT REQUIRED CONNECT IF EQUIPPED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP STEP 1 YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA SEQUOIA WITh JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 1

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 1 H H BACKUP CAM BACKUP CAM MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT IF EQUIPPED CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 WIRING DIAGRAM with an Amplifier YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) STEP 1 WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA SEQUOIA WIThOUT JBL 2014-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 2

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 2 H H BACKUP CAM BACKUP CAM YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA SIENNA WITh JBL 2015-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. Note: The reverse camera cannot be retained in this vehicle. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 7

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 7 H H BACKUP CAM BACKUP CAM REVERSE CAMERA HARNESS STEP 2 CONNECT IF EQUIPPED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS TO2 T-HARNESS STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECTION NOT REQUIRED REVERSE CAMERA CANNOT BE RETAINED CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 WIRING DIAGRAM with an Amplifier YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) STEP 1 WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA SIENNA WIThOUT JBL 2015-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the male WHITE 2 pin connector of your TO2 T-harness into the OBDII harness. • Plug the OBDII connector into the OBDII of the vehicle. STEP 5 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 6 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 2

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 2 H H BACKUP CAM BACKUP CAM YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 5 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 6 MAESTRO RR MODULE DATA CABLE OBDII CONNECTOR STEP 4 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA TACOMA WITh JBL 2016-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 3

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 3 H H BACKUP CAM BACKUP CAM NOT CONNECTED MAIN HARNESS RCA CABLES RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE WIRING DIAGRAM with an Amplifier CONNECTION NOT REQUIRED CONNECT IF EQUIPPED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) WHITE WHITE/BLACK GRAY GRAY/BLACK LF RCA INPUT RF RCA INPUT SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECTIONS NOT REQUIRED WITH AMP STEP 1 YELLOW/GREEN (NOT CONNECTED)

Automotive Data Solutions Inc. © 2018 5 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White or Yellow/Green (see Wiring diagram) Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

iDatalink Maestro TO2 Installation Harness INSTALL GUIDE TOyOTA TACOMA WIThOUT JBL 2016-2018 Retains factoRy amplifieR, steeRing wheel contRols, and moRe! NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Automotive Data Solutions Inc. © 2018 2 WELCOME NEED hELP? Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer- ence Chart. Please note that Maestro RR will only retain functionalities that were originally available in the vehicle. 1 866 427-2999 [email protected] maestro.idatalink.com/support www.12voltdata.com/forum DURING INSTALLATION Installation Instructions 3 Wiring Diagram 4 Radio Wire Reference Chart 5

Automotive Data Solutions Inc. © 2018 3 INSTALLATION INSTRUCTIONS STEP 1 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the front speaker wire junction connectors. • Connect the wires shown on the next page from aftermarket radio main harness to the TO2 T-harness and match the wire functions. • Remove the factory radio. STEP 2 • If the vehicle is equipped with an OEM backup camera, connect the TO2 T-harness to the backup camera harness. STEP 3 • Connect the factory harness to the TO2 T-harness. STEP 4 • Plug the aftermarket radio harnesses into the aftermarket radio. • Connect the backup camera RCA cable into the aftermarket radio (if equipped). • Connect the auxiliary RCA cables into the aftermarket radio (if equipped). • Plug the Data cable to the data port of the aftermarket radio. STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds. • For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” 4

Automotive Data Solutions Inc. © 2018 4 AUX IN AUX IN A G F A F G 4 H H BACKUP CAM BACKUP CAM NOT CONNECTED CONNECTION NOT REQUIRED YELLOW - 12V (+) BLACK - GROUND RED - ACCESSORY (+) YELLOW/BLACK - FOOT BRAKE ORANGE - ILLUMINATION (+) PURPLE/WHITE - REVERSE LIGHT (+) PINK - VEHICLE SPEED LTGREEN - E-BRAKE (-) BLUE/WHITE - AMP. TURN ON (+) MAIN HARNESS RCA CABLES FACTORY RADIO HARNESS REVERSE CAMERA HARNESS TO2 T-HARNESS STEP 1 STEP 2 STEP 3 STEP 4 WIRES FROM VEHICLE CONNECT YELLOW RCA AUX IN IF VEHICLE IS EQUIPPED WITH AUXILIARY VIDEO SEE AFTERMARKET RADIO GUIDE FOR RADIO WIRE COLORS GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE/BLACK - RR SPEAKER (-) PURPLE - RR SPEAKER (+) CONNECT TO AFTERMARKET RADIO STEP 5 MAESTRO RR MODULE DATA CABLE CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) WIRING DIAGRAM without an Amplifier CONNECT IF EQUIPPED YELLOW/GREEN (NOT CONNECTED)