ICPDAS GTP-230 Quick Start Manual

E-mail: [email protected] 1 GTP-230 Quick Start Guide JUN 2017, Version 1.0.0 Congratulations! ·············································· Thanks for purchasing the GTP-230 module - the 3G SMS alarm solution and 3G gateway solution for remote monitoring and control application. This Quick Start Guide will provide related information which needed to get start with the GTP-230 module. Please also consult the user manual for detailed information on the setup and usage of the GTP-230 module. What’s In the Box! ············································ In addition to this guide, the package includes the following items:

E-mail: [email protected] 2  Appearance  COM port communication Pin Description 1 COM 2 RS-232** TxD1 2 RxD1 3 RxD1 4 COM 1 RS-232* TxD1 5 RxD1 6 GND 7 COM 2 RS-485** D+ 8 D- 9 INIT 10 GND * COM1 RS-232 is dedicated for Utility settings. ** COM2 RS-232 and COM2 RS-485 for the shared design, the data cannot be input at the same time. NO. Description 1 LED indicators (4) 2 3G antenna 3 GPS antenna (not yet open GPS function) 4 Switch (1, 2) 5 COM Port communication (RS-232, Utility, RS-485). 6 Power Connector(PWR, GND, F.G.) 7 MicroSD card slot (top) ,SIM card slot (bottom) Pin Description +Vs Power，+10~+30VDC GND Power ground F.G. Earth ground 1 2 3 4 5 7 6

E-mail: [email protected] 3  LED Indicator The GTP-230 module provides seven LED indicators, including indicators for power status and 3G communication status. The Following is an overview of the purpose and function of each LED indicator together with a description. LED Name LED Status LED Description PWR(Red) ON The power of the module is ON 3G(Red) Flashing Once per sec Successfully registered connection to base station (general status) Flashing 3 times per sec Successfully registered connection to base station (Internet access) ON/OFF 3G cannot register GPS (Green) Flashing GPS successfully positioned (*Note) ON/OFF GPS is not positioned (*Note) STA(Orange) Flashing Once per sec The internal operation is normal Flashing 3 times per sec Initial mode ON/OFF The internal operation is abnormal *Note: GPS function is not yet available now.

E-mail: [email protected] 4  DIP Switch The GTP-230 module includes SMS alarm function and gateway function, DIP switches are provided for switching function. The factory default of the DIP switch is enabled as illustrated in following figure. SW1 SW2 Description Status OFF OFF SMS alarm function Utility setting mode OFF ON Virtual COM Gateway function ON OFF No default ON ON No default About the more detail information for the GTP-230 module, please refer to the user’s manual. Technical Support ············································  GTP-230 User Manual http://ftp.icpdas.com/pub/cd/usbcd/napdos/gtp-230/manual/  GTP-230 Website http://m2m.icpdas.com/gtp-230.html  ICP DAS Website http://www.icpdas.com/