bora PKI11 Operating And Installation Instructions

Induction glass ceramic cooktops 1039928

 Original  Translation Manufacturer BORA Vertriebs GmbH & Co KG Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Austria Contact T +43 (0) 5373 / 62250-0 [email protected] www.bora.com The distribution and duplication of this document, as well as the use and disclosure of its contents are prohibited unless expressly authorised. These operating and installation instructions have been drawn up with the greatest of care. But it cannot be ruled out that subsequent technical modifications have not yet been incorporated or the relevant content has not yet been adapted. Please accept our apologies in this eventuality. An updated version can be requested from the BORA Service Team. Subject to printing errors and mistakes. © BORA Vertriebs GmbH & Co KG All rights reserved.

1 General information 4 2 Safety 6 2.1 General safety instructions .................................6 2.2 Safety instructions – operation ...........................7 2.3 Safety instructions – installation .........................9 2.4 Safety instructions – disassembly and disposal ........................................................9 2.5 Safety instructions – spare parts ......................10 2.6 Intended use .....................................................10 3 Technical data 11 4 Device description 12 4.1 Structure ...........................................................12 4.2 Operating principle ............................................12 4.3 Functional principle ...........................................13 4.3.1 Power levels ......................................................13 4.3.2 Power setting ....................................................13 4.3.3 Automatic heat up function ...............................13 4.3.4 Heat retention levels .........................................14 4.3.5 Suitable cookware .............................................14 4.3.6 Pan size recognition ..........................................14 4.3.7 Timer functions .................................................15 4.3.8 Pause function ..................................................15 4.4 Safety devices ...................................................15 4.4.1 Residual heat display.........................................15 4.4.2 Safety shut-down ..............................................15 4.4.3 Cooking zone overheating protection ................15 4.4.4 Childproofing feature .........................................15 5 Installation 16 5.1 Checking the scope of delivery .........................16 5.2 Tool and aids .....................................................16 5.3 Assembly instructions .......................................16 5.3.1 Safety clearances ..............................................16 5.4 Cut-out dimensions ...........................................16 5.4.1 Worktop overhang .............................................16 5.4.2 Flush installation ...............................................17 5.4.3 Surface mounting ..............................................17 5.5 Installing the cooktop ........................................17 5.5.1 Air supply cooktop ............................................18 5.5.2 Installing the control knob into the floor unit front panel .........................................18 5.5.3 Installing the cooktop ........................................19 5.5.4 Seal the cooktop ...............................................20 5.5.5 Establish communication ..................................20 5.5.6 Establishing the power connection....................21 5.6 Configuration menu ..........................................21 5.6.1 Accessing the configuration menu ....................21 5.6.2 Select menu option ...........................................21 5.6.3 Changing the setting .........................................22 5.6.4 Exiting configuration menu ................................22 5.7 Handover to user ...............................................22 6 Operation 23 6.1 General operating instructions ..........................23 6.2 Operating the cooktop ......................................23 6.2.1 Switching on the cooking zone .........................23 6.2.2 Power setting ...................................................23 6.2.3 Automatic heat up function ...............................24 6.2.4 Switching off the automatic heat up function ......24 6.2.5 Heat retention level ...........................................24 6.2.6 Childproofing feature .........................................24 6.2.7 Using the timer function ....................................25 6.2.8 Pause function ..................................................25 6.2.9 Switching off the cooking zone .........................26 7 Cleaning and maintenance 27 7.1 Cleaning agents .................................................27 7.2 Looking after the cooktop .................................27 7.3 Cleaning the cooktop ........................................27 7.4 Cleaning the control knobs ...............................27 7.4.1 Cleaning the knob ring ......................................28 7.4.2 Cleaning the touch surface and the knob housing ...............................................28 8 Troubleshooting 29 9 Decommissioning, disassembly and disposal 30 9.1 Decommissioning ..............................................30 9.2 Disassembly ......................................................30 9.3 Environmentally-friendly disposal ......................30 10 Warranty, technical service and spare parts 31 10.1 Warranty ............................................................31 10.2 Service ..............................................................31 10.3 Replacement parts ............................................31

following target groups: Target group Requirements User The appliance can be used by children aged 8 and above as well as people with reduced physical, sensory or mental capacities or a lack of experience and/or knowledge if they are supervised or have been instructed how to safely use the appliance and understand the resultant risks. Children must be supervised. All safety and warning information and the handling instructions in the installation instructions must be complied with. Ambitious DIYers Ambitious DIYers can independently conduct all joinery and installation work providing they possess the necessary skills and expertise. They must never independently establish electricity and gas connections. Installation specialists Installation specialists are authorised to conduct all joinery and installation work in line with existing regulations. The electricity and gas connections must be certified by a certified engineer for the applicable trade prior to commissioning. Electricians The electrical connection may only be established by a certified engineer. He/she also assumes responsibility for the proper electrical installation and commissioning. Gas specialists The gas connection may only be established by certified engineers. They also assume responsibility for proper installation and commissioning of the gas system. Tab. 1.1 Target groups INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH - hereinafter referred to as BORA - do not assume any liability for damage arising from non-adherence to these documents and from improper assembly! The electricity and gas connections must be made by a qualified specialist. Installation must comply with the valid standards, regulations and laws. All safety and warning information and the operating and installation instructions must be complied with. Validity of the operating and installation instructions These instructions apply to several device versions. It is therefore possible that some of the features described do not apply to your appliance. Other applicable documents These operating and installation instructions are valid in conjunction with other documents, which must be adhered to. Please be sure to adhere to all documents that form part of the scope of delivery. INFO BORA accepts no liability for damage caused by failure to comply with these documents! Directives These devices meet the following EU/EC directives: 2014/30/EU EMC Directive 2014/35/EU Low Voltage Directive 2009/125/EC Ecodesign Directive 2011/65/EU RoHS Directive 2012/19/EU WEEE Directive

To make working with these instructions quick and easy, consistent formatting, numbering, symbols, safety instructions, terms and abbreviations are used throughout. Handling instructions are market with an arrow. X X Always carry out handling instructions in the sequence shown. Bullet points are indicated by a square bullet point at the edge of the line. Q Q Bullet point 1 Q Q Bullet point 2 INFO Information points out specific points you must always comply with. Safety and warning information The safety and warning information in these instructions are highlighted with symbols and signal words. Safety and warning information is structured as follows: WARNING SYMBOL AND SIGNAL WORD! Type and source of the danger Consequences of non-compliance X X Measures to minimise risk The following applies: Q Q The warning symbol draws attention to the danger. Q Q The signal word indicates the severity of the risk. Warning sign Signal word Hazard Danger Indicates an imminent hazardous situation which could lead to death or serious injury if ignored. Warning Indicates an imminent hazardous situation which could lead to death or serious injury if ignored. Caution Indicates a potentially hazardous situation which could lead to slight or minor injuries if ignored. — Caution Indicates a situation which could result in material damage if ignored. Tab. 1.2 Meaning of warning symbols and signal words

INFO The appliance complies with the stipulated safety requirements. The user is responsible for appliance cleaning and maintenance as well as its safe use. Improper use can lead to personal injury and damage to property. Q Q The operating and installation instructions contain important information about installation and operation. These enable you to protect yourself against injuries and prevent damage to the appliance. Contact details for further information as well as application and usage questions can be found on the back of these operating and installation instructions. Q Q The term device applies to cooktops, cooktop extractors and cooktops with cooktops extractors. X X Read the operating and installation instructions fully before using the appliance for the first time. X X Always store the operating and installation instructions within easy reach so that they can be accessed if required. X X Pass the operating and installation instructions to the next owner if you sell the appliance. X X Conduct all work extremely attentively and conscientiously. X X Check the appliance for visible damage when unpacking it. X X Do not connect a damaged appliance. X X Only use the appliance once all installation activities are complete. This is the only way to ensure safe operation. X X Make sure that hot hobs are not touched. X X Avoid boiling over. X X Pay attention to the residual heat display. X X Switch the device off after use. X X Do not rely on the pan size recognition. X X Keep pets away from the appliance. CAUTION! Risk of injury from falling device components! Falling device components such as pan supports, control elements, ­covers,­grease­filters,­etc.­can­cause­ injuries. X X Place device components safely near the devices after you remove them. X X Make sure that none of the device components you have removed could fall. Recirculation mode INFO When cooking, additional moisture is released into the ambient air. INFO In recirculation mode, only a slight amount of moisture is removed from the cooking vapour. X X When using recirculation mode, ensure a sufficient supply of fresh air, e.g. by opening a window. X X Ensure a normal and comfortable room climate (humidity of 45–60%), e.g. by opening natural ventilation openings or using domestic ventilation systems. X X After every use in recirculation mode, switch the cooktop extractor to a low level for about 20 minutes or activate the automatic after-run function. Effect on pacemakers, hearing aids and metallic implants INFO Induction cooktops generate a high-frequency electromagnetic field near the cooking zones. Coming too close to the cooking zones could have a negative influence or even cause malfunctions of pacemakers, hearing aids or metallic implants. Issues with pacemakers are unlikely.

and maintenance section). X X Do not put hot cookware near the control panel so as not to damage the electronics underneath. X X Make sure no water penetrates inside the device when cleaning. Only use a slightly damp cloth. Never spray water on the device. Water ingress can cause damage! X X Where possible, clean the cooktop after every cooking session. X X Only clean the cooktop when it has cooled down. X X For cleaning, only use non-abrasive detergents to avoid scratching or wearing the surface. X X Make sure the base of the cookware and the cooking zone are clean and dry. X X Always lift the cookware (do not pull) to avoid scratching or wearing the surface. 2.2 Safety instructions – operation Cooktop DANGER! Unsupervised cooktops are a fire risk! Oil­and­fat­can­heat­up­and­catch­fire­ quickly. X X Never leave hot oil or fat unattended. X X Never attempt to extinguish burning oil or fat with water. X X Stifle the fire using a lid, for example. DANGER! Risk of explosion caused by flammable liquids! Flammable liquids in the vicinity of the cooktop can explode and cause serious injury. X X Do not place any flammable liquids in the vicinity of the cooktop. X X In case of doubt, please contact the manufacturer of your medical device or your doctor. Households with children and people with special needs X X The appliance can be used by children aged 8 and above as well as people with reduced physical, sensory or mental capacities or a lack of experience and/or knowledge if they are supervised or have been instructed how to safely use the appliance and understand the resultant risks. X X Supervise children in the vicinity of the appliance. X X Children must not play with the appliance. Q Q Use the childproofing feature to prevent children accidentally switching the cooktop on or changing the settings. X X Do not store any items that could be of interest to children in storage spaces above or behind the appliance. Children will otherwise be encourage to climb on the appliance. X X Keep children and other people away from hot hobs. Unauthorised modifications Unauthorised modifications can cause the appliance to pose risks. X X Do not conduct any modifications to the appliance. Cleaning and maintenance The device must be cleaned regularly. Dirt can lead to damage or the buildup of odours. Remove any dirt immediately. Q Q Cleaning and maintenance work must not be carried out by children unless they are supervised at all times. X X Do not use steam cleaners. The steam can cause a short-circuit on live parts and

Handles projecting over the edge are enticing for children to grab. X X Do not turn pot and pan handles so they stick out beyond the work surface. X X Make sure that children cannot pull hot pots and pans over. X X A special stove guard for children (available from specialist suppliers) reduces the risk. WARNING! Risk of getting burnt! Liquid between the cooking zone and the pan base can evaporate and cause burns. X X Make sure that the cooking zone and the pan base are always dry. CAUTION! Damage from hard and pointed objects! Hard and pointed objects can damage the glass ceramic panel of the cooktop! X X Do not use the surface of the cooktop as a worktop. X X Do not use hard and pointed objects when working on the cooktop. CAUTION! Damage from sugary and salty foods! Sugary and salty foods and juices can damage the hot cooking zone. X X Make sure sugary and salty foods or juices do not get onto the cooking zone while it is hot. X X Remove sugary and salty foods and juices from the hot cooking zone. CAUTION! Escaping hot liquids! Unattended pans can boil over allowing hot liquids to escape. X X Always keep an eye on pans while cooking. X X Short cooking sessions must be constantly monitored. DANGER! Risk of electric shock! Chips, cracks or breaks in the glass ceramic panel can expose or damage the electronics underneath. This can lead to an electric shock. X X If the glass ceramic panel gets chipped, broken or cracked, switch the cooktop off immediately. X X Securely disconnect the appliance from the mains using LS switches, fuses, automatic circuit breakers or contactors. WARNING! Risk of burns from hot cooktop! The cooktop and its exposed areas get hot during use. Once the cooking zone­is­switched­off,­it­takes­a­little­ while to cool down below 60 °C. Touching hot surfaces can cause serious burns. X X Never touch the cooktop when it is hot. X X Keep children away from the cooktop when it is hot or ensure they are supervised at all times. WARNING! Leaving items on the cooking surface is a fire risk! The cooktop and its touchable parts are hot when the cooking zone is switched on and during the cooling phase. Objects on the cooktop can get­hot­and­catch­fire. X X Do not place any items on the cooktop. WARNING! Risk of burns from hot objects! The cooktop and its touchable parts are hot when the cooking zone is switched on and during the cooling phase. Objects (e.g. pan lids, cooktop extractor cover) on the cooktop heat up very quickly and can cause serious burns. X X Do not place any items on the cooktop. X X Please use suitable tools (pot holders, oven gloves).

If the mains connection cable comes into contact with hot hobs, it could get damaged. A damaged mains connection cable can cause a (deadly) electric shock. X X Make sure that the mains connection cable cannot come into contact with hot hobs. X X Make sure that the connection cable is not squashed or damaged. CAUTION! Lifting heavy loads can cause back injuries! If not correctly handled, removing and installing the device can causes injuries to the limbs or torso. X X Removing the cooktop from the packaging is a two-person job. X X Placing the cooktop into the worktop cut-out is a two-person job. X X Use appropriate aids to prevent damage or injuries to limbs or torso. X X Check the appliance for visible damage before installing it. X X Do not install damaged devices. Q Q A damaged device is a hazard. Q Q Repair work must only be carried out by specialists authorised by the manufacturer. 2.4 Safety instructions – disassembly and disposal The device must only be disassembled by trained specialists who are familiar with and comply with the standard national regulations and supplementary regulations of the local utility companies. Work on electrical components must only be conducted by trained electrical personnel. CAUTION! Risk of injury from objects on the cooktop! Objects such as pan lids on the cooktop can damage the glass ceramics. X X Do not leave objects on the hot cooktop. 2.3 Safety instructions – installation The device must only be installed and assembled by trained specialists who are familiar with and comply with the standard national regulations and supplementary regulations of the local utility companies. Work on electrical components must be conducted by trained electrical personnel. The electrical safety of the appliance is only guaranteed if it is connected to a protective conductor system that has been installed in line with regulations. Ensure that this basic safety precaution is met. Cooktop DANGER! Risk of electric shock! Incorrect connection of the device to the mains voltage could cause electric shocks. X X Make sure that the device is firmly connected to the mains voltage. X X Make sure the device is connected to a properly installed earth conductor system. X X Make sure a system is installed which allows disconnection from the network with a contact opening width of at least 3 mm across all poles (circuit breaker, fuses, automatic circuit breakers, contactors).

Q Q Installation in vehicles Q Q Heating rooms Q Q Use in non-stationary installation sites (e.g. on ships) Q Q Use with an external timer or a separate remote control system (remote operation) Any use other than that specified in these operating and installation instructions or any use that goes beyond that which is described here is classed as unintended. BORA does not assume any liability for damages caused by improper use or incorrect operation. All misuse is prohibited! INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH do not assume any liability for damage arising from non-adherence to the safety and warning information. DANGER! Risk of electric shock! Incorrectly disconnecting the appliance from the mains results in a risk of electric shock. X X Securely disconnect the appliance from the mains using LS switches, fuses, automatic circuit breakers or contactors. X X Use an authorised measuring device to ensure that there is no power to the appliance. DANGER! Risk of asphyxiation! Packaging­components­(e.g.­film,­ polystyrene) can be life-threatening for children. X X Store all packaging components out of reach of children. X X Dispose of the packaging properly and immediately. 2.5 Safety instructions – spare parts WARNING! Risk of injury and damage to property! Incorrect components can lead to personal injury or damage to the ­appliance.­Modifications,­additions­or­ alterations to the appliance can lead to safety risks. X X Only use original spare parts for repairs. 2.6 Intended use The device cannot be used at altitudes above 2000 m (metres above sea level). The device is designed exclusively for the preparation of food in private households. This appliance is not intended for:

Frequency 50/60 Hz Power consumption 3.7 kW Fuse protection 1 x 16 A Dimensions (width x depth x height) 370 x 540 x 52 mm Weight (incl. accessories/ packaging) 8.0 kg Cooktop Value Power levels 1 - 9, P Heat retention levels 3 Front cooking zone power setting Ø 230 mm 2300 W 3700 W Rear cooking zone Power setting Ø 165 mm 1400 W 2200 W Cooktop energy consumption Front cooking zone Ø 230 mm 179.4 (Wh/kg) Back cooking zone Ø 155 mm 178.3 (Wh/kg) Total (average) 178.8 (Wh/kg) Tab. 3.1 Technical data PKI11 Device dimensions control knob Ø76 Ø58 Ø49 92 22 10-40 20 Fig. 3.1 Device dimensions control knob Device dimensions cooktop 370 255 540 133,5 Ø165 Ø230 Fig. 3.2 PKI11 Device dimensions aerial view 341 14,5 52 31 40 228 Fig. 3.3 PKI11 Device dimensions front view 509 15,5 410 32 Fig. 3.4 PKI11 Device dimensions side view

operation (see the Safety section). The cooktop has the following features: Q Q Automatic heat up function Q Q Safety shut-down Q Q Electronic power control (9 levels) Q Q Power setting Q Q Childproofing feature Q Q Residual heat display Q Q Pause function Q Q Pan size recognition Q Q Heat retention levels 4.1 Structure 5 4 3 2 1 Fig. 4.1 Cooktop [1] Connections for control knob and extraction system [2] Front induction cooking zone [3] Back induction cooking zone [4] Control knob for the back cooking zone [5] Control knob for the front cooking zone 4 3 2 1 Fig. 4.2 Structure of control knob [1] Knob casing [2] Universal nut [3] Control knob display [4] knob ring 4.2 Operating principle 2 1 Fig. 4.3 Control elements of control knob [1] knob ring [2] Touch surface 5 4 3 2 1 Fig. 4.4 Control knob display elements [1] Display of functions [2] Power display [3] Front cooking zone display [4] Display of mode or operating mode [5] Rear cooking zone display

gelatine 1 Keeping sauces and soups warm, soaking rice 1-3 Cooking potatoes, pasta, soups, ragouts, steaming fruit, vegetables and fish, defrosting food 2-6 Frying in coated pans, moderate frying (without overheating the fat) of pork cutlets, fish 6-7 Heating up fat, browning fish, cooking thickened sources and soups, making omelettes 7-8 Cooking large quantities of liquid, browning steaks 9 Heating up water P Tab. 4.2 Recommendations for power levels The specifications provided in the table are standard values. Depending on the cookware and filling quantity, it is recommended to either decrease or increase the power level. 4.3.2 Power setting The two cooking zones are equipped with a power- enhancing power setting. The power setting can be used in order to quickly heat up large quantities of water. If the power setting is activated, the cooking zone will run at extra high power. After 10 minutes, the cooking zone is automatically switched to power level 9. INFO Never heat up oil, fat and the like at this power setting. The bottom of the pan can overheat due to the high power output. 4.3.3 Automatic heat up function The two cooking zones are equipped with an automatic heat up function that can be switched on and off. Q Q The display shows A. This function enables the cooking zone to work at full power for a certain duration after switching on. After this time, the power level is automatically switched back to the power level set. Unit Display Meaning Control knob display 1 - 9 Power levels P Power setting A Automatic heat up function t Short-time timer function (egg timer) H Residual heat display: Cooking zone is switched off but still hot (temperature > 60°C) L Childproofing feature I I Pause function v Heat retention level v Pan size recognition C Configuration menu 0 Cooktop switching off E... Error message (see Troubleshooting section) Tab. 4.1 Meaning of display Knob operation All the cooking zones are controlled using a control knob. By twisting the control knob and pressing the touch surface, the power levels and functions for the relevant cooking zone are controlled (see Operation section). 4.3 Functional principle An induction coil is located underneath an induction cooking zone. If the cooking zone is switched on, this coil creates a magnetic field that acts directly on the base of the pot thus heating it up. The cooking zone is only indirectly heated up by the heat emitted by the pot. Cooking zones with induction only work if the cookware has a magnetisable base. The induction automatically takes into account the size of the used cookware which means that only the area in the cooking zone covered by the base of the pot is heated up. X X Observe the minimum pot base diameter. 4.3.1 Power levels The high power output of induction cooktops results in the very quick heating up of cookware. A slight adjustment is needed in comparison to conventional cooking systems when selecting the power level in order to avoid burning food.

temperature sensor underneath the hob, overheating may occur. The bottom of the cookware must not have any sharp grooves or sharp edges to avoid scratching the cooktop. X X Place the cookware (without a mat or similar) directly onto the glass ceramic. Noises The following noises may occur in the cookware when using induction cooking zones, depending on the material and the finish of the base: Q Q Humming may occur when using a high power level. It decreases or disappears if the power level is decreased. Q Q Crackling or whistling may occur due to the bases of cookware made of different materials (e.g. sandwich base). Q Q Clicking sounds may occur during electronic switching procedures especially at low power levels. Q Q Whirring may occur when the cooling fan is switched on. In order to increase the service life of the electronic system, the cooktop is equipped with a cooling fan. The cooling fan switches on automatically if the cooktop is used intensively. You will hear a whirring sound. The cooling fan may continue running after the device has been switched off. 4.3.6 Pan size recognition The cooking zone does not work if Q Q ... v is shown in the display. Q Q ... If it is switched on without cookware or with unsuitable cookware. Q Q ... the base diameter of the cookware is too small; Q Q ... if the cookware is removed from a switched on cooking zone. Q Q ... after 10 minutes if no pan is detected. The cooking zone then switches off automatically and can only be switched back on after the control knob has been turned back to the zero position. Power level Cooking duration in min:sec 1 0:40 2 01:00 3 02:00 4 03:00 5 04:20 6 07:00 7 02:00 8 03:00 Tab. 4.3 Overview of the automatic heat up function 4.3.4 Heat retention levels The heat retention level keeps cooked foods warm. Q Q v appears in the control knob display. Q Q The maximum duration for the warming function is limited to 8 hours. There are three different heat retention levels. Heat retention level Symbol Temperature 1 , 42° C 2 ; 74° C #3 * 94° C Tab. 4.4 Heat retention levels 4.3.5 Suitable cookware INFO The heating and heat through time for the base of the cookware as well as the cooking results are significantly influenced by the structure and material of the cookware. Cookware with this symbol is suitable for induction cooktops. The cookware used for the induction cooktop must be made of metal, feature magnetic properties and possess a sufficient bottom surface. Suitable cookware is made of: Q Q stainless steel with a magnetisable base Q Q enamelled steel Q Q cast iron Cooking zone Minimum diameter PKI11 front back 120 mm 90 mm Tab. 4.5 Minimum cookware diameter X X Perform a magnet test, if necessary. If a magnet sticks to the base of the utensils, they are normally induction compatible. X X Pay attention to the cookware bottom. The base of the cookware should not show any sign of curvature. Due to incorrect temperature monitoring of the hob

1 08:24 2 06:24 3 05:12 4 04:12 5 03:18 6 02:12 7 02:12 8 01:48 9 01:13 P 00:10 Tab. 4.6 Safety shut-down for power levels Heat retention level Switch off after hours:minutes 1 08:00 2 08:00 3 08:00 Tab. 4.7 Safety shut-down for heat retention levels X X Switch the cooking zone back on (see Operating section) if you want to put the cooking zone back into operation. 4.4.3 Cooking zone overheating protection All induction coils plus the cooling elements of the electronics are equipped with overheating protection. Before the induction coils and/or cooling elements overheat, the overheating protection will initiate one of the following measures: Q Q The power setting P automatically switches to power level 9 after 10 minutes. The control knob indicator P switches to 9. Q Q The set power level is reduced. Q Q The cooking zones switch off automatically (see safety shut-down of the cooking zones). 4.4.4 Childproofing feature The­childproofing­feature­prevents­the­cooktop­from­ being­switched­on­accidentally.­The­‏childproofing­feature­ can only be activated when all the cooking zones are switched­off­(see­the­Operation­section). 4.3.7 Timer functions There are two different timer functions for each cooking zone. Q Q t appears in the control knob display. INFO You can set a time range of between 1 and 120 minutes for the timer functions. Timer function INFO The timer function is an automatic cut-off which automatically switches off a cooking zone which is in use. Short-time timer (egg timer) INFO The short-time timer requires the cooking zone to be switched off and works like a conventional egg timer. 4.3.8 Pause function The cooking session can be temporarily interrupted (max. 10 minutes). Q Q 1 1 is displayed in front of the power level on the control knob display. 4.4 Safety devices 4.4.1 Residual heat display INFO While H is displayed in the cooking zone indicator (residual heat display), do not touch the cooking zone or place any heat-sensitive objects on top of it. Risk of burns and fire! After switching it off, the cooking zone remains hot. H is displayed in the control knob display (residual heat display). The display goes out after a sufficient cooling time (temperature < 60 °C). 4.4.2 Safety shut-down Each cooking zone is switched off automatically when the cooking zone in the power level or heat retention level exceeds the maximum operating duration. The control knob display shows H (residual heat display).

(see the Safety section). X X Follow the enclosed manufacturer’s information. INFO The cooktop must not be installed above cooling devices, dishwashers, stoves, baking ovens, washing machines or driers. INFO The contact surface of the worktops and wall sealing strips must be made of a heat-resistant material (up to approx. 100 °C). INFO Worktop cut-outs must be moisture-sealed using suitable means or, where necessary, fitted with a thermal insulator. 5.1 Checking the scope of delivery Name Quantity Control knob 2 Operating and installation instructions 1 Cooktop fixing screws 4 Height adjustment plate set 1 Cooktop 1 Cooktop mounting straps 4 Control knob cable 2 Automatic extraction cable 1 Glass ceramic panel cleaning instructions 1 Glass ceramic scraper 1 Tab. 5.1 Scope of delivery X X Check the scope of delivery for damage and make sure it is complete. X X If there are any missing or damaged parts, please notify BORA After Sales Service immediately. X X Do not under any circumstances install parts which are damaged. X X Dispose of transport packaging in the proper manner (see the Decommissioning and Disposal section). 5.2 Tool and aids The following tools are required for the correct installation of the cooktop: Q Q Pencil Q Q Measurement equipment: Q Q Drill or cordless drill with Forstner bit Ø 50mm Q Q Screwdriver/hexolobular internal key (Torx) 20 Q Q Silicone sealant for sealing cutting surfaces 5.3 Assembly instructions 5.3.1 Safety clearances X X Maintain the following safety clearances: 1 3 2 Fig. 5.1 Minimum clearances [1] Minimum clearance of 50 mm at the back from of the worktop cut-out to the rear edge of the worktop. [2] Minimum clearance of 300 mm from the left and right of the worktop cut-out to the adjacent cabinet or wall. [3] Minimum clearance of 600 mm between the worktop and the wall unit. 5.4 Cut-out dimensions Preparing the worktop X X Create the worktop cut-out taking into account the specified cut-out dimensions. X X Make sure that the cutting surfaces of the worktops are properly sealed. X X Comply with the instructions of the worktop manufacturer. 5.4.1 Worktop overhang ≥74 x Fig. 5.2 Worktop overhang X X Please note the worktop overhang x when creating the worktop cut-out. Applies to flush installation and surface mounting.

Fig. 5.6 Surface mounting cut-out Cut-out dimensions when installing cooktops or cooktops and the cooktop extractor next to each other: Cooktops/cooktop extractor A in mm B in mm 1/0 374 346 2/0 745 717 3/0 1116 1088 1/1 485 457 2/1 856 828 3/2 1338 1310 4/2 1709 1681 Tab. 5.2 Cut-out dimensions 5.5 Installing the cooktop INFO Clearance of one millimetre should be planned between the built-in appliances. INFO A clearance of two millimetres should be planned around the built-in appliances. INFO A mounting rail must always be fitted between adjacent cooktops (available as an accessory). INFO Alternatively, the cooktop can be fitted rotated about 180°. Q Q Cross bars on the kitchen unit in the area of the worktop cut-out may need to be removed. Q Q The drawers and/or shelves in the floor unit must be removable for maintenance and cleaning purposes. X X Make sure that the area below the cooktop is sufficiently ventilated (see ‘Air supply cooktop’). 5.4.2 Flush installation A ±2 B ±2 544 ±2 ≤ R5 ≤ R5 ≥ 74 516 ±2 ≥ 700 Fig. 5.3 Flush installation 7 14 10 ... 40 Fig. 5.4 Groove dimensions for flush installation 5.4.3 Surface mounting B ±2 ≤ R5 ≥ 74 516 ±2 ≥ 700 Fig. 5.5 Surface mounting

floor unit front panel INFO Pre-drill the bore holes to prevent tearing out the fixed front panel. Fig. 5.9 Installed control knob and cooktop ≥70 Ø50 ±0,5 370 80-140 Fig. 5.10 Drill template [1] Cooktop [2] Worktop [3] Floor unit panel Fig. 5.11 Fitting the control knob 5.5.1 Air supply cooktop INFO A minimum opening cross-section of 50 cm² for the air supply must be observed. X X Make sure that the area below the cooktop is sufficiently ventilated. Air supply via the front area If cable protection (false floor) is planned below the appliances, it must be removable for maintenance work. A sufficient air supply must be ensured. X X Shorten the cable protection to ensure 100 mm clearance from the back wall of the kitchen unit. 1 2 >80 100 Fig. 5.7 Air supply via the front area [1] Air supply body front [2] Optional cable protection (shortened) Air supply via the plinth area The air supply via the plinth area may be fed either through the body or the plinth panel. 1 2 Fig. 5.8 Air supply via the plinth area [1] Air supply in the plinth area through the plinth panel [2] Air supply in the plinth area through the body

3 2 1 Fig. 5.14 Insert cooktop [1] Connections for control knob and extraction system (front) [2] Cooktop [3] Worktop cut-out X X Insert the cooktop [2] into the worktop cut-out [3]. X X Align the cooktop [2] exactly. X X For a normal installation, please note that the connections for the control knob and the extraction system [1] are at the front. INFO The device connection should be at the rear. Use the cable holders provided. 1 2 Fig. 5.15 Cooktop and height adjustment plates [1] Cooktop [2] Height adjustment plates X X If applicable, insert the height adjustment plates [2]. X X Pull off the knob ring. X X Unscrew the fixing nut. X X Push the control knob through the drilled hole in the floor unit panel from the front. X X Screw the fixing nut onto the control knob from the rear and tighten a little. X X Use the marking to align the control knob vertically in the 12 o’clock position. X X Tighten the fixing nut. X X Place the knob ring on the control knob. Example bore holes ≥70 90 90 90 Ø50 ±0,5 90 196 196 370 370 110 1 1 Fig. 5.12 Bore holes for 2 cooktops and 1 extractor [1] Bore holes for socket (2x external) [2] Bore holes for control knobs (5x) [3] Cooktop 2x [4] Cooktop extractor [5] Worktop [6] Floor unit panel ≥70 90 90 90 90 90 196 196 196 196 370 370 370 110 1 1 1 1 110 Ø50 ±0,5 Fig. 5.13 Bore holes for 3 cooktops and 2 extractors [1] Bore holes for socket (2x external) [2] Bore holes for control knobs (8x) [3] Cooktop 3x [4] Cooktop extractor (2x) [5] Worktop [6] Floor unit panel

1 Fig. 5.18 Silicone sealant for surface mounting [1] Black, heat-resistant silicone sealant 5.5.5 Establish communication X X Establish the connection between the cooktop and the control knobs. Connection the control knob 1 Fig. 5.19 Connection the control knob on the back [1] Connection the control knob on the back Connect the control knob to the cooktop 3 2 1 Fig. 5.20 Connection the control knob to the cooktop on the front [1] Connection the control knob for the front cooking zone [2] Connection the extraction system 2 1 Fig. 5.16 Mounting brackets [1] Screw [2] Mounting bracket X X Fasten the cooktop [1] using the mounting brackets [2]. X X Tighten the mounting bracket screws [1] with max. 10 Nm. X X Verify that the alignment is correct. X X Once all of the installation work is complete, seal the devices with black, heat-resistant silicone sealant. Installation rotated around 180°. X X Rotate the cooktop around 180°. X X For the installation, proceed as described above. X X Change the installation direction in the configuration menu (see Configuration menu). INFO If installation is rotated around 180°, then the connections for the control knob and the extraction system are at the rear. INFO Cables of sufficient length are supplied. 5.5.4 Seal the cooktop X X Make sure that no silicone sealant gets under the cooktop. 1 Fig. 5.17 Silicone sealant for flush installation

X X Switch on the main switch/automatic circuit breaker. X X Put the cooktop into operation (see the Operation section). X X Check that all the functions are working correctly. 5.6 Configuration menu Once installation is complete, you can adjust the basic settings for the cooktop, these can then be changed at any time. 5.6.1 Accessing the configuration menu X X Twist the control knob to the 11 o’clock position. t appears in the control knob display. X X Press the touch surface of the control knob for a second. The display switches to 000. X X Press the touch surface again within 3 seconds and hold it down for 5 seconds. Q Q The control knob display shows C, a beep sounds and the configuration menu is available. 5.6.2 Select menu option X X Turn the knob ring to select the menu option you want. The following menu options are available: Menu options C0 Volume of warning beep C 1 Select operating mode (normal mode or demo mode) C2 0° or 180° installation C9 Availability of the pause function Tab. 5.4 Menu options in the configuration menu X X Touch the touch surface on the control knob again for 1 second to confirm the menu you want. Q Q The sub-menu is accessed and the display switches to a three-character combination (e.g. C23). INFO In the three-character combination shown, the right-hand figure shows the value saved in the system. [3] Connection the control knob for the rear cooking zone X X Connect the connection on the back of the control knob to the connections provided at the front of the cooktops. X X Use the connections provided to join the cooktop extractor to the extraction system on the front of the cooktop. X X Use the ribbon cable provided. 5.5.6 Establishing the power connection X X Observe all safety and warning information (see the Safety section). X X Observe all national and regional laws and regulations as well as the supplementary regulations of the local utility companies. INFO The power connection may only be established by certified specialists. The specialist also assumes responsibility for the proper installation and commissioning. The power supply line for use (pre-assembled) must be at least Type H05VV-F or H05VVH2-F. (See table Fuse protection and minimum cross-section). Connection Fuse protection Minimum cross-section 1-phase connection 1 x 16 A 1.5 mm² Tab. 5.3 Fuse protection and minimum cross-section Q Q If the connection line has been damaged this must be replaced by a special connection line. This may only be done by an authorized member of the After Sales Service team. X X Switch off the main switch/automatic circuit breaker before connecting the cooktop. X X Secure the main switch/automatic circuit breaker against being switched back on without permission. X X Make sure the power to the appliance is disconnected. X X Only connect the cooktop using a permanent connection to a power supply cable. 1 L1 2 N PE 220 - 240 V~ Fig. 5.21 Connection diagram 1-phase

If you have confirmed menu item C9, you can permanently disable the pause function. Setting Pause function available/disabled C90 Pause function available Factory setting C9 1 Pause function disabled Tab. 5.8 Availability of the pause function 5.6.3 Changing the setting X X Turn the knob ring clockwise to increase the value. X X Turn the knob ring anticlockwise to decrease the value. X X Press the touch surface on the control knob again for 1 second to confirm the new setting. The value is saved and a beep sounds. The previously selected menu option is shown again on the control knob display. 5.6.4 Exiting configuration menu X X Twist the knob ring until the display shows C. X X Now press the touch surface on the control knob again for 1 second to exit the configuration menu. The display goes out and a beep sounds. X X Twist the knob ring to the 12 o’clock position. 0 appears on the display for 10 seconds. The display then goes out with a beep. INFO If no settings are changed in a menu or sub- menu option for 2 minutes, the configuration menu is closed automatically. 5.7 Handover to user Once installation is complete: X X Explain the main functions to the user. X X Explain all safety-related aspects of operation and handling to the user. X X Affix the nameplate supplied to the back of these operating and installation instructions. X X Provide the user with the accessories and the operating and installation instructions for safe storage. Setting the volume of the warning beep Once you have confirmed menu option C0, you can set the volume of the warning beep. Setting Warning beep volume C00 100% (max. volume) Factory setting C0 1 10% (min. volume) C02 20% C03 30% C04 40% C05 50% C06 60% C07 70% C08 80% C09 90% Tab. 5.5 Warning beep volume Select mode When you have confirmed menu option C 1, you can select the operating mode. Setting Mode C10 Normal operating mode Factory setting C 1 1 Demo mode Tab. 5.6 Operating modes INFO All the control knob functions are available in demo mode. The heating function for the cooktop is deactivated. Demo mode is used, for example, for exhibitions. 0° or 180° installation In menu option C2, you can set whether the cooktop is installed rotated around 180°. Setting Display C20 Installation 0° Factory setting C2 1 Installation 180° Tab. 5.7 Installation direction INFO For installation rotated around 180°, the C2 1 assign the correct cooking zones inside the control knob display.

operation (see the Safety section). INFO The cooktop may only be operated when the stainless steel grease filter of the cooktop extractor is installed (see operating instructions for cooktop extractor). INFO Clean the cooking zone before using the cooktop for the first time (see the Cleaning section). 6.1 General operating instructions The cooktop is controlled using the control knobs. Each cooking zone has its own control knob. The front cooking zone is controlled using the left-hand knob and the back cooking zone with the right-hand knob. There are 9 power levels, one power setting and various functions available for each cooking zone. t P 9 8 7 6 5 4 3 2 v 1 0 Fig. 6.1 Knob ring assignment Knob ring position Function 0 Switching off v Heat retention level 1 - 9 Power levels P Power setting t Timer function Tab. 6.1 Knob ring positions 6.2 Operating the cooktop 6.2.1 Switching on the cooking zone Fig. 6.2 Switching on the cooking zone X X Turn the knob ring from the 12 o-clock position to a power level. Adjusting the power level X X Turn the knob ring to the desired power level. INFO The selected power level is shown in the middle 7 segment display on the control knob. 6.2.2 Power setting Switching on the power setting INFO Both cooking zones are equipped with a power-enhancing power setting. If a cooking zone is operated at power setting P, the other cooking zones can be operated at a maximum power level of 5. If the power setting is increased from 5, the power level is switched down from P. If the power level is set higher than 5 when power setting P is activated for the other cooking zone, it is automatically reduced to power level 5 after 3 seconds (the control knob display flashes for 3 seconds). If the power setting P is deactivated again within these 3 seconds, the second cooking zone can continue to be operated at the higher power level. X X Twist the knob ring to the 10 o’clock position. Q Q The control knob display shows P and the power setting is activated. Q Q After 10 minutes, the cooking zone is automatically switched back to power level 9. Switching the power setting off early X X Turn the knob ring to the desired power level. Q Q The power level set is active and is shown in the control knob display.

level is between the 12 o’clock position and the 1 o’clock position. X X Twist the knob ring around 15° clockwise from the 12 o’clock position, where it should slot into place. Q Q v appears in the control knob display. X X Press the touch surface on the control knob for 1 second to activate the heat retention level 1. Q Q This is confirmed by a beep and the symbol is sown on the control knob display. Heat retention level 1 2 3 Symbol . ; * Temperature in °C 42 74 94 Tab. 6.2 Temperatures of heat retention levels Increase heat retention level X X Press the touch surface on the control knob a second time for 1 second to activate heat retention level 2 (;). X X Press the touch surface on the control knob a third time for 1 second to activate heat retention level 3 (*). Q Q Each time, this is confirmed by a beep and the relevant symbol is shown on the control knob display. Reduce heat retention level Q Q After setting heat retention level 3, pressing the touch surface (1 second) again reduces the level by 1. Q Q Each time, this is confirmed by a beep and the relevant symbol is shown on the control knob display. Switching off heat retention level The heat retention level activated switches off if you X X select another power level X X switch off the cooking zone 6.2.6 Childproofing feature INFO The childproofing feature can only be activated or permanently deactivated if the knob ring is in the 12 o’clock position and there are no active functions. Activating the childproofing feature X X Press the touch surface of one of the control knob for 5 seconds. Q Q An acoustic signal can be heard and the display on the control knob switches to L. After 10 seconds, another acoustic signal sounds and the display goes out. The childproofing feature is activated. 6.2.3 Automatic heat up function Switching on the automatic heat up function INFO The exact values for the heat-up time can be found in the Device description section. X X Select the desired power level (= later continuous cooking level). X X Within 3 seconds of setting the power level, press the touch surface of the control knob for at least 1 second. Q Q The automatic heat up function is activated and the control knob shows an A in front of the continuous cooking level selected (e.g. A3). INFO An A is shown on the control knob display for as long as the automatic heat up function is active. Q Q Once the automatic heat up period has passed, the power is reduced to the selected continuous cooking level. Q Q If a higher continuous cooking level is selected while the automatic heat up function is active, the new heat- up time is automatically valid. 6.2.4 Switching off the automatic heat up function The activated automatic heat up function will end prematurely if you X X reduce the power level (continuous cooking level). X X set power level 9. X X activate power setting P. X X activate heat retention level v. X X switch off the cooktop. 6.2.5 Heat retention level Activating the heat retention level 15° Fig. 6.3 Knob ring setting for heat retention level

power level and the remaining time (accurate to the minute for more than 2 minutes and accurate to the second for under 2 minutes). Q Q Once the remaining time is less than 2 minutes, only the time is displayed. Q Q At the end of the time, the cooking zone is switched off, a beep sounds for 2 minutes and the control knob display flashes 000. Q Q The flashing and the beeping can be stopped by pressing the touch area or twisting the knob ring to the 12 o’clock position. Switching the timer off early: X X Twist the knob ring to the 12 o’clock position. Q Q The control knob display changes to 0, a beep sounds and the cooking zone switches off. Activating the short-time timer (egg timer) X X Once you have confirmed the time set, you have 3 seconds to turn the knob ring to the 12 o’clock position. Q Q This activates the short-time timer and the time starts to count down. Q Q The displays shows remaining time (accurate to the minute for more than 2 minutes and accurate to the second for under 2 minutes). Q Q At the end of the time, a beep sounds for 2 minutes and the control knob display flashes 000. Q Q The flashing and the beeping can be stopped by pressing the touch surface. Switching off the short-time timer (egg timer) early: X X Press the touch surface of the knob ring. Q Q The short-time timer is deactivated. Q Q The control knob display shows 0 and a beep sounds. 6.2.8 Pause function Activate pause function X X Press the touch surface of the control knob for 1 second. Q Q A beep can be heard and the control knob display shows 1 1 in front of the power level. Q Q The cooking session is interrupted. INFO The cooking session can be paused for a maximum of 10 minutes. If the pause function is not deactivated in this time, the relevant cooking zone is switched off. Deactivate pause function X X Press the touch surface of the control knob for 1 second. Q Q A beep sounds and the power level selected is shown on the control knob display. Q Q The cooking session continues. Permanently deactivating the childproofing feature X X Press the touch surface of one of the control knob for 5 seconds. Q Q A beep can be heard and the display on the control knob switches to 0. After 10 seconds, another beep sounds and the display goes out. The childproofing feature is permanently deactivated. Deactivating the childproofing feature for a cooking session X X Turn the knob ring from the 12 o-clock position to a power level. Q Q L appears in the control knob display. X X Press the touch surface of the control knob for 5 seconds. Q Q An acoustic signal can be heard and the control knob display shows the power level selected. Q Q The childproofing feature is only deactivated for this cooking session and you can set the power level you want. Q Q The childproofing feature is reactivated next time you switch on. 6.2.7 Using the timer function INFO You can set a time range of between 1 and 120 minutes for the timer functions. Set time X X Twist the knob ring to the 11 o’clock position. Q Q t appears on the control knob display. X X Press the touch surface for one second. Q Q A beep can be heard and the control knob display switches to 000. X X Within 3 seconds, twist the knob ring to set the timer time. Q Q Turning clockwise increases the time (starting at 0 minutes), while turning anticlockwise reduces the time (starting at 120 minutes). Q Q In the range from 0 to 20 minutes, the time reduces/ increases in both directions by one minute at a time, while the increments are 5 minutes for the rest of the range. Q Q If no time is set within 3 seconds, the timer is deactivated and the control knob display switches to t. X X Press the touch-surface within 3 seconds to confirm the time set. Q Q A beep sounds and the set value starts to flash on the control knob display. Activating the timer function X X Once you have confirmed the time set, you have 3 seconds to turn the knob ring to the power level you want. Q Q This activates the timer function and the time starts to count down.

INFO If a cooking zone indicator shows H, the cooking zone is still hot. INFO Turn the cooking zone off after use. Do not rely on the pan size recognition. Fig. 6.4 Switching off the cooking zone X X Twist the knob ring to the 12 o’clock position. Q Q A beep sounds and the cooking zone is deactivated. Q Q The cooktop is switched off when there are no longer any active cooking zones. X X Pay attention to the residual heat display (see the Device Description section).

www.bora.com 7 Cleaning and maintenance X X Observe all safety and warning information (see the Safety section). X X Follow the enclosed manufacturer’s information. X X When conducting scheduled cleaning and other maintenance, make sure that the cooktop and cooktop extractor are fully switched off so as to prevent injury (see Operation section). Q Q Regular cleaning and maintenance ensures the longevity of the product and optimal function. X X Adhere to the following cleaning and maintenance cycles: Component Cleaning cycle Control knob Cooktop immediately they become dirty with conventional detergents Tab. 7.1 Cleaning cycles 7.1 Cleaning agents INFO Due to the use of aggressive cleaning agents and abrasion caused by the pot bases the surface will become damaged and dark stains will occur. To clean the cooktop, you need a special glass ceramic scraper and suitable detergents. X X Never use steam cleaners, abrasive sponges, scouring pads or chemically aggressive cleaning agents (e.g. oven cleaner spray). X X Make sure that the cleaning agent does not contain any sand, soda, acids, lyes or chloride. 7.2 Looking after the cooktop X X Never use the cooktop as a work or storage surface. X X Do not push or pull cookware over the cooktop. X X Always lift pots and pans. X X Keep the cooktop clean. X X Remove any dirt immediately. X X Only use cookware suitable for glass ceramic cooktops (see Device description section). 7.3 Cleaning the cooktop X X Make sure that the cooktop is switched off (see the Operation section). X X Wait until all cooking zones are cold. X X Remove all coarse dirt and food residues from the cooktop using a glass ceramic scraper. X X Put the detergent onto the cold cooktop. X X Spread the detergent using kitchen roll or a clean cloth. X X Rinse the cooktop off with water. X X Dry the cooktop with a clean cloth. If the cooktop is hot: X X remove stubborn residues of plastic, aluminium foil, sugar or sweet dishes from the hot cooking zone immediately using a glass ceramic scraper to prevent burning. Heavy soiling X X Remove heavy soiling and marks (limescale marks, mother-of-pearl like shiny marks) using detergents while the cooktop is still warm. X X Wipe off food that boils over with a wet cloth. X X Remove any remaining dirt with the glass ceramic scraper. X X Always remove seeds, crumbs or similar which fall onto the cooktop during cooking immediately to prevent the surface getting scratched. Any changes in colour or glossy spots are not damage to the cooktops. They do not affect the functionality of the cooktop or the stability of the glass ceramic panel. Changes in the colour of the cooktop are the result of residue which has not been removed and has burnt on. Glossy spots are the result of wear by the pan base, especially if aluminium-based cookware or unsuitable detergents are used. It is hard work to remove them. 7.4 Cleaning the control knobs 1 2 3 Fig. 7.1 Pull out the knob ring [1] Knob casing [2] Touch surface [3] knob ring

www.bora.com 7.4.1 Cleaning the knob ring The knob ring can only be cleaned by hand. X X Remove the knob ring from the knob housing. X X Use a cleaner and degreaser in one. X X Rinse the knob ring in hot water. X X Clean the knob ring with a soft brush. X X Rinse the knob ring well after cleaning. X X Dry the knob ring carefully. X X Place the dry knob ring back on the knob housing. X X Make sure it is positioned correctly (0 position). X X If necessary, twist the knob ring to the 12 o’clock position (= 0 position). 7.4.2 Cleaning the touch surface and the knob housing X X Pull off the knob ring. X X Clean the touch surface and the knob housing with a soft, damp cloth. X X Dry the touch surface and the knob housing carefully. X X Place the knob ring back on the knob housing. INFO If the knob ring has not been fitted correctly, a segment rotating clockwise is displayed in the central control knob display .

Operating situation Cause Remedy The cooktop cannot be switched on. Knob ring missing Place the knob ring on the control knob. The fuse or automatic circuit breaker of the electrical wiring system in the apartment and/ or house is defective. Replace the fuse. Switch the automatic circuit breaker back on The fuse or the automatic circuit breaker trips multiple times Contact BORA Service Team The power supply is disconnected. Have a specialist electrician inspect the power supply Formation of odours and vapours when operating the new cooktop Normal for brand new devices Wait a few hours If the odours continue to develop, contact the BORA Service Team The cooling fan continues running after switching off The cooling fan will continue to run until the cooktop has cooled down and will then switch off automatically. Wait until the cooling fan switches off automatically. A cooking zone or the entire cooktop switches off automatically. Cooking zone operating for too long Put the cooking zone back into operation (see the Operation section). The overheating protection has tripped (see the Device Description section) The power setting has automatically shut off too early. The overheating protection has tripped (see the Device Description section) the central control knob display shows a segment turning clockwise Knob ring not in the 0 position after fitting Turn the control knob to the 12 o’clock position (= 0 position), Control knob display L The childproofing feature is activated Switch off the childproofing feature (see the Operation section). Control knob display v No or unsuitable cookware on the cooking zone Only use suitable cookware Select the cookware size depending on the cooking zone (see the Device Description section) Control knob display / Continuous operation (30 s) of the control knob or control knob dirty Release or clean the control knob Control knob display E003 Electrical connection between touch surface and knob ring (min. 3-5 seconds) Remove the knob ring and wipe residual water from the touch surface Control knob display E019 Error evaluating the touch surface Twist control knob to “0” position Call BORA Service Team Control knob display E021 Temperature too high Allow cooktop to cool Tab. 8.1 Resolving a fault X X After troubleshooting, turn the knob ring to the 12 o’clock position (0 position). X X In all other cases, contact the BORA Service Team (see section ‘Warranty, technical service and spare parts) and enter the error number displayed and the device type.

www.bora.com 9 Decommissioning, disassembly and disposal X X Observe all safety and warning information (see the Safety section). X X Follow the enclosed manufacturer’s information. 9.1 Decommissioning Decommissioning is understood as final shutdown and disassembly. Following decommissioning, the device can either be installed into other units, sold on privately or disposed of. INFO Electricity and gas connections may only be disconnected by qualified specialists. X X To decommission, switch the device off (see Operation section) X X Disconnect the device from the power supply. 9.2 Disassembly For removal, the device must be accessible for disassembly and disconnected from the power supply. For gas devices, make sure the gas connection is disconnected. X X Undo the mounting brackets. X X Remove the silicone joints. X X Remove the device from the worktop by lifting it upwards. X X Remove any other accessories. X X Dispose of the old device and any contaminated accessories as described under “ Environmentally- friendly disposal”. 9.3 Environmentally-friendly disposal Disposal of transport packaging INFO The packaging protects the device from damage in transport. The packaging materials have been selected from environmental and disposal perspectives and are therefore recyclable. Returning the packaging to the materials cycle saves resources and reduces waste volumes. Your specialist supplier will take the packaging back. X X Give the packaging to your specialist supplier or X X Dispose of the packaging properly in line with local regulations. Disposal of old appliance Electrical devices marked with this label may not be disposed of in domestic waste at the end of their service life. They must be disposed of at a collection point for the recycling of old electrical or electronic devices. You can find information from your city or district council. Many electrical and electronic devices still contain valuable materials. But they also contain damaging materials which were necessary for them to function properly and safely. These can damage human health or the environment if disposed of improperly or incorrectly handled. X X Never put your old appliance in domestic waste. X X Take the old appliance to a regional collection point for return and recycling electrical and electronic components and other materials.

www.bora.com 10 Warranty, technical service and spare parts X X Observe all safety and warning information (see the Safety section). 10.1 Warranty The warranty period is 2 years. 10.2 Service BORA Service: see back page of operation and installation instructions +800 7890 0987 X X If there are faults which you are not able to resolve yourself, please contact your BORA specialist supplier or the BORA Service Team. The BORA Service Team requires the type designation and the build number of your appliance (FD number). Both pieces of information can be found on the nameplate on the back of the instructions and on the appliance base. 10.3 Replacement parts X X Only use original spare parts for repairs. INFO Replacement parts can be obtained from your BORA dealer, the BORA online service website at www.bora.com/service or by calling the service number provided.

Rosenheimer Str. 33 83064 Raubling Germany T +49 (0) 8035 / 907-240 F +49 (0) 8035 / 907-249 [email protected] www.bora.com Austria: BORA Vertriebs GmbH & Co KG Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Austria T +43 (0) 5373 / 62250-0 F +43 (0) 5373 / 62250-90 [email protected] www.bora.com Europe: BORA Holding GmbH Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Austria T +43 (0) 5373 / 62250-0 F +43 (0) 5373 / 62250-90 [email protected] www.bora.com Australia - New Zealand: BORA APAC Pty Ltd 100 Victoria Road Drummoyne NSW 2047 Australia T +61 2 9719 2350 F +61 2 8076 3514 [email protected] www.bora-australia.com.au Nameplate: (please affix) +800 7890 0987