Lexmark T650dtn Quick Reference
Text of the manual
Loading paper and
specialty media
Loading the 250-sheet or
550-sheet tray
1 Pull the tray out.
Note: Do not remove trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
2 Squeeze the width guide tab inward as shown, and move the
width guide to the correct position for the paper size being
loa
Loading the 2000-sheet tray
1 Pull the tray out.
2 Pull up and slide the width guide to the correct position for the
paper size being loaded.
3 Unlock the length guide.
4 Push the length guide release latch to raise the length guide,
slide the guide to the correct position for the paper size being
loaded, and then lock the guide.
5 Flex the sheets back and f
6 Load the paper stack:
• Print side facedown for single-sided printing
• Print side faceup for duplex printing
Note: Paper must be loaded differently in the trays if an
optional StapleSmart II Finisher is installed. For more
information, see the User's Guide/
Note: Notice the maximum fill line on the side of the tray
which indicates the maximum height f
Setting the Paper Size and
Paper Type
The Paper Size setting is determined by the position of the paper
guides in the tray for all trays except the multipurpose feeder. The
Paper Size setting for the multipurpose feeder must be set
manually. The factory default Paper Type setting is Plain Paper. The
Paper Type setting must be set manually for all trays that
3 Click Other Options, and then click Print and Hold.
4 Select your job type (Confidential, Repeat, Reserve, or Verify),
and then assign a user name. For a confidential job, also enter
a four-digit PIN.
5 Click OK or Print, and then go to the printer to release the job.
6 From the printer control panel, press the arrow buttons until
Held jobs appears, and th
