IBM 3160 Introduction And Planning Manual

Coded fonts are typically used where typographic quality is required. code point. An element of a code page or a site in a code table to which a character can be assigned. configuration. (1) The arrangement of a computer system or network as defined by the nature, the number, and the chief characteristics of its functional units. More specifically, the term configuration may refer to a hardware configuration or a software configuration. (2) The devices and programs that make up a system, subsystem, or network. configure. The procedure used to ...

Typeface FGID GCSGID Courier Italic Bold 428 1269 Symbols Times New Roman Medium 2308 1275 Times New Roman Bold 2309 1275 Helvetica Roman Medium 2304 1275 Helvetica Roman Bold 2305 1275 Courier Roman Medium 416 1275 Courier Roman Bold 420 1275 Cyrillic Greek Times New Roman Medium 2308 1300 Times New Roman Bold 2309 1300 Times New Roman Italic Medium 2310 1300 Times New Roman Italic Bold 2311 1300 Helvetica Roman Medium 2304 1300 Helvetica Roman Bold 2305 1300 Helvetica Italic Medium 2306 1300 Helvetica Italic Bold 2307 13 ...

Dimension A Configuration 65 cm (25.6 in.) Base printer without side stacker and 2000-sheet tray 40.5 cm (15.9 in.) Add to base printer for side stacker with short paper 50.2 cm (19.8 in.) Add to base printer for side stacker with long paper (A3 and Ledger) 46 cm (18 in.) Add to base printer for optional 2000-sheet tray 70.2 cm (27.6 in.) Add to base printer for 3000-sheet side stacker (option). This dimension includes 6 inches of travel when stacker is pulled away from printer to remove paper jams. Dimension B Values: Dimension B Model 69.5 cm (27.4 in.) 3160-001 77 cm (30 ...

Chapter Overview This chapter provides an overview of the planning process for installing an InfoPrint 60 or 3160-001 printer. There are two basic types of planning required for installing and using the printer: physical planning and system planning. � Physical planning consists of: – Determining the location for the printer. – Preparing a layout plan for the printer – Making sure all printer environmental, electrical, and space requirements are met For more information, see Chapter 4, “Preparing the Physical Environment” on page 15. In addition, IBM of ...