IAdea XDS-2450 Quick Start Manual

This printed quick guide provides a quick walkthrough of the set up process. For complete documentation, please visit www.digisignage.com Box Contents System connections Main Unit AC Power Adapter & cord Monopod flex stand Quick Start Guide Wi-Fi Antenna Quick Start Guide A USB keyboard required to change system settings. A #2 Phillips screwdriver is needed to access the DC-in port. USB Keyboard AND #2 Phillips screwdriver required Software CD (Select SKUs) Software Guide (Select SKUs) Ethernet Cable

Mounting Options and Hardware Installation Option 1: Supplied Monopod flex stand Option 2: Optional tabletop VESA stand PVK-202 Option 3: 3rd party VESA MIS- D100/E200 fixtures Installing Wi-Fi antenna and power plug SCREW-MOUNT Wi-Fi antenna REMOVE screw to detach metal plate ATTACH power plug RE-ATTACH plate and tighten screw System setup 1 ATTACH the AC power adapter to AC outlet → you should see “Starting up” on screen 2 WAIT while player boots up (~ 60 seconds) → once you see the “Welcome” screen, the unit is ready for content update or menu configuration 3 PLUG IN a USB keyboard to the USB port → the player will enter the graphical menu system in approx. 30 seconds 4 NAVIGATE the menus using your keyboard arrows (up), (down), (left), (right) to move the selection, (Space bar) to select, (Enter) to confirm, and (ESC) to cancel → set the correct time zone under Time setting. IMPORTANT time zone must be set correctly in the

→ using the USB keyboard, select a wireless network and provide security information to connect to your wireless access point → (OPTIONAL) Change Password to prevent access to the menus. IMPORTANT A password is not present by default. Setting a password will hide the menus even if a USB keyboard is plugged in. To re-enter the menu, press CTRL-ALT-DEL and enter the password. If you forget the password, see Reset player to factory defaults. 5 SAVE settings and exit the menu, then REMOVE the USB keyboard. → the player will reboot with new settings in place. Settings are now retained even if you remove the power → for advanced player configuration, such as static IP, proxy server, time server, display option, and security settings, visit http://www.digisignage.com for detailed documentation. 6 ADJUST picture and sound (disabling the on-screen key lock) Video and audio settings can be adjusted like a regular TV via hidden front-panel touch buttons. ENTER front bezel-key combination MENU-↑-↓-↑-↓-MENU to disable key lock ADJUST brightness in the on- screen menu using ↑/↓/MENU ADJUST volume. Menu auto- locks after 5 seconds of inactivity Content Management Please consult the software documentation for information specific to your management solution.

Frequently Asked Questions When I have wireless configured and Ethernet wire connected, which path (wired or wireless) is data sent? The wired Ethernet connection takes precedence over the wireless when both are available. As soon as you unplug the network wire, the system attempts to reconnect via wireless network. How do I know if my wireless is properly connected? On player boot up, it attempts to obtain an IP address from your router via the wireless link. If the result is successful, you should see an IP address within your network range. If this fails, you would see an IP in the form of 169.254.1.x which indicates it has not been able to receive a valid IP address, probably due to poor wireless connection. What can I do about the gap between video and video? Using recommended codec H.264 HP@L4, 10Mbps to achieve best video performance. The average video gap is less than 1 sec. Reset player to factory defaults If modifying settings cause unintended results or if you have forgotten your password, please reset the player. Local contents will also be removed. 1. PRESS and hold the reset button with a pointed tool 2. Re-connect the power cord while holding reset button 3. Wait 12 seconds until the orange status LED flashes 4. Release reset button and wait 90 seconds for system to initialize Further information For complete documentation, please visit www.digisignage.com