Blizzard Lighting LOOK Operation & User’s Manual

(c) 2016 Blizzard Lighting, LLC TABLE OF CONTENTS LOOK™ Dual Beam + Aura Effect 1 1. Getting Started 3 What’s In The Box? 3 Getting It Out Of The Box 3 Powering Up! 3 Getting A Hold Of Us 3 Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4 2. Meet The LOOK™ 5 Main Features 5 DMX Quick Reference 5 The LOOK™ Pin-up Picture 6 3. Setup 7 Fuse Replacement 7 Connecting A Bunch Of LOOK™ Fixtures 7 Data/DMX Cables 7 Cable Connectors 8 3-Pin??? 5-Pin??? Huh? 8 Take It To The Next Level: Setting up DMX Control 8 Fixture Linking (Master/Slave Mode) 9 Mounting/Rigging 9 Installation 10 4. Operating Adjustments 10 The Control Panel 11 Control Panel Menu Structure 12 DMX Channel Values In-Depth 14 Troubleshooting 19 5. Appendix 20 A Quick DMX Lesson 20 Keeping Your LOOK™ As Good As New 21 Returns (Gasp!) 21 Shipping Issues 21 Tech Specs 22 Dimensional Drawings 23

(c) 2016 Blizzard Lighting, LLC 1. GETTING STARTED What’s In The Box? • 1 x LOOK™ Professional LED Fixture • An Ever-So-Handy Power Cord • This Lovely User Manual Optional Accessories (sold separately) The following accessory is currently available for this fixture. But the lone wolves that they are, they must be purchased separately. Contact your authorized Blizzard Lighting dealer for best pricing! • LOOK Klamp: Modular dual Omega bracket mounting plate that fits perfectly into the top 4-peg locking mechanism of LOOK™ fixtures. Comes with plate attachment and (2) 1/4 turn Omega brackets. Getting It Out Of The Box Congratulations on your purchase of LOOK™, the ultra-sharp dual beam fixture with mes- merizing LED aura effects! Now that you’ve got your LOOK™ (or hopefully, LOOKS), you should carefully unpack the box and check the contents to ensure that all parts are pres- ent and in good condition. If anything looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection. Again, please save the carton and all packing materials. If a fixture must be returned to the factory, it is impor- tant that the fixture be returned in the original factory box and packing. Powering Up! All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that the fixture you receive is suitable for your local power supply. See the label on the fixture or refer to the fixture’s specifications chart for more information. A fixture’s listed current rating is its average current draw under normal conditions. Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use. Warning! Verify that the voltage select switch on your unit matches the line voltage applied. Damage to your fixture may result if the line voltage applied does not match the voltage indicated on the voltage selector switch. All fixtures must be connected to circuits with a suitable Ground (Earthing). Getting A Hold Of Us If something is wrong, please just visit our website at www.blizzardlighting.com/ support and open a support ticket. We’ll be happy to help, honest. Disclaimer: The information and specifications contained in this document are subject to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time. You can download the latest version of this document from www. blizzardlighting.com. Author: Date: Last Edited: Date: J. Thomas 9/9/2016 J. Thomas 9/13/2016

(c) 2016 Blizzard Lighting, LLC SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the de- cal or rear panel of the fixture. • This product is intended for indoor use only. • To prevent risk of fire or shock, do not expose fixture to rain or moisture. • Make sure there are no flammable materials close to the unit while operating. • The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked. • ALWAYS disconnect from the power source before servicing or replacing fuse and be sure to replace with same fuse size and type. • ALWAYS secure fixture using a safety chain. NEVER carry the fixture by its head. Use its carrying handles. • DO NOT operate at ambient temperatures higher than 104°F (40°C). • In the event of a serious operating problem, stop using the unit immediately. NEVER try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized tech- nical assistance center. Always use the same type spare parts. • NEVER connect the device to a dimmer pack. • Make sure the power cord is never crimped or damaged. • Never disconnect the power cord by pulling or tugging on the cord. • Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please open a support ticket at www. blizzardlighting.com/support.

(c) 2016 Blizzard Lighting, LLC 2. MEET THE LOOK™ MAIN FEATURES • 2* high output 60W RGBW 4-in-1 LEDs • 2* 4-segment ring aura effects (16 x 0.5W RGB LEDs) • Individually controllable beams and aura effects • Ultra-sharp 4.5° beam angle (x2) • 2700-10000K CTC (color temperature control) • User adjustable white balance settings • Stackable and side-by-side locking linear array • LED drive current: beam=4500mA, aura=30mA • User selectable 32-bit dimming modes, 0-20Hz strobe effects • 3-pin and 5-pin male/female input and outputs • PowerCon™ compatible AC power In/Out connectors CONTROL: • Protocol: USITT DMX-512 • DMX Channels: 13/24/45-channel • 2.4 inch TFT color LCD display panel with 4x touch sensitive buttons • Operating Modes: Standalone, Master/Slave, Auto, Sound Active DMX Quick Reference (13/24/45-Channel Modes) CH. Basic Mode (13ch) CH. Standard Mode (24ch) CH. Extended Mode (45ch) 1 Beam Red (0-100%) 1 Beam 1 Red (0-100%) 1 Beam 1 Red (0-100%) 2 Beam Green (0-100%) 2 Beam 1 Green (0-100%) 2 Beam 1 Green (0-100%) 3 Beam Blue (0-100%) 3 Beam 1 Blue (0-100%) 3 Beam 1 Blue (0-100%) 4 Beam White (0-100%) 4 Beam 1 White (0-100%) 4 Beam 1 White (0-100%) 5 Aura Red (0-100%) 5 Beam 2 Red (0-100%) 5 Beam 2 Red (0-100%) 6 Aura Green (0-100%) 6 Beam 2 Green (0-100%) 6 Beam 2 Green (0-100%) 7 Aura Blue (0-100%) 7 Beam 2 Blue (0-100%) 7 Beam 2 Blue (0-100%) 8 Beam Macro Color 8 Beam 2 White (0-100%) 8 Beam 2 White (0-100%) 9 Aura LED Effect 9 Beam Linear CTO 9 Beam 1 Linear CTO 10 Aura LED Speed 10 Beam Macro Color 10 Beam 2 Linear CTO 11 Strobe 11 Strobe 11 Beam 1 Macro Color 12 Dimmer 12 Beam LED Dimmer 12 Beam 2 Macro Color 13 32-Bit Dimming Modes 13 32-Bit Dimming Modes 13 Strobe -- -- 14 Aura 1 Red (0-100%) 14 Beam LED Dimmer -- -- 15 Aura 1 Green (0-100%) 15 32-Bit Dimming Modes -- -- 16 Aura 1 Blue (0-100%) 16 Beam LED Auto Select -- -- 17 Aura 2 Red (0-100%) 17 Beam LED Auto Speed -- -- 18 Aura 2 Green (0-100%) 18 Aura LED Dimmer -- -- 19 Aura 2 Blue (0-100%) 19 Aura LED Strobe -- -- 20 Aura LED Dimmer 20 Aura LED Effect -- -- 21 Aura LED Strobe 21 Aura LED Speed -- -- 22 Aura LED Effect 22 Aura 1 - Red 1 -- -- 23 Beam LED Auto Select 23 Aura 1 - Green 1 -- -- 24 Aura LED Effect & Beam 24 Aura 1 - Blue 1 -- -- -- -- 25 Aura 1 - Red 2 -- -- -- -- 26 Aura 1 - Green 2 -- -- -- -- 27 Aura 1 - Blue 2 -- -- -- -- 28 Aura 1 - Red 3 -- -- -- -- 29 Aura 1 - Green 3 -- -- -- -- 30 Aura 1 - Blue 3 -- -- -- -- 31 Aura 1 - Red 4 -- -- -- -- 32 Aura 1 - Green 4 -- -- -- -- 33 Aura 1 - Blue 4 -- -- -- -- 34 Aura 2 - Red 1 -- -- -- -- 35 Aura 2 - Green 1 -- -- -- -- 36 Aura 2 - Blue 1 -- -- -- -- 37 Aura 2 - Red 2 -- -- -- -- 38 Aura 2 - Green 2 -- -- -- -- 39 Aura 2 - Blue 2 -- -- -- -- 40 Aura 2 - Red 3 -- -- -- -- 41 Aura 2 - Green 3 -- -- -- -- 42 Aura 2 - Blue 3 -- -- -- -- 43 Aura 2 - Red 4 -- -- -- -- 44 Aura 2 - Green 4 -- -- -- -- 45 Aura 2 - Blue 4

(c) 2016 Blizzard Lighting, LLC Figure 1: The LOOK™ Pin-Up Picture 2* 60W RGBW 4-in-1 LEDs w/4.5° Beam Effects Mounting Bracket w/Locking Knobs Figure 2: The Rear Connections 2* RGB 3-in-1, 4-Segment Ring Aura Effects Fuse Cover Power Out 3-Pin DMX Out 5-Pin DMX Out 4-Button Menu LCD Display 5-Pin DMX In 3-Pin DMX In Power In

(c) 2016 Blizzard Lighting, LLC 3. SETUP Fuse Replacement Remove the fuse holder from of its housing. Then take out the dam- aged fuse from its holder and replace with exact same type of fuse. Reattach the fuse holder, and then reconnect power. Connecting A Bunch of LOOK™ Fixtures You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in mas- ter/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fix- tures the data link can support. Fixtures on a serial data link must be daisy chained in one single line. Also, connecting more than 32 fixtures on one serial data link without the use of a DMX optically-isolated splitter may result in deterioration of the digital DMX signal. The maximum recommended cable-run dis- tance is 500 meters (1640 ft). The maximum recommended number of fixtures on a serial data link is 32 fixtures. Data/DMX Cabling To link fixtures together you’ll need data cables. You should use data- grade cables that can carry a high quality signal and are less prone to electromagnetic interference. For instance, Belden© 9841 meets the specifications for EIA RS-485 applications. Standard microphone cables will “probably” be OK, but note that they cannot transmit DMX data as reliably over long distanc- es. In any event, the cable should have the following characteristics: 2-conductor twisted pair plus a shield Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms

(c) 2016 Blizzard Lighting, LLC Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the fix- ture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other. 3-Pin??? 5-Pin??? Huh?!? If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. They are widely available over the internet and from specialty retailers If you’d like to build your own, the chart below details a proper cable conversion: Conductor 3-Pin Female (Output) 5-Pin Male (Input) Ground/Shield Pin 1 Pin 1 DMX Data (-) Pin 2 Pin 2 DMX Data (+) Pin 3 Pin 3 Not Used. No Connection. No Connection. Not Used. No Connection. No Connection. Take It To The Next Level: Setting Up DMX Control Step 1: Connect the male connector of the DMX cable to the female connector (output) on the controller. Step 2: Connect the female connector of the DMX cable to the first fixture’s male connec- tor (input). Note: It doesn’t matter which fixture address is the first one connected. We recommend connecting the fixtures in terms of their proximity to the controller, rather than connecting the lowest fixture number first, and so on. Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication.

(c) 2016 Blizzard Lighting, LLC Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3/5-pin connector side of the DMX cable to the output (female) 3/5-pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3/5-pin con- nector to the input connector of the next fixture consisting of a (male) 3/5-pin connector. Then, pro- ceed to connect from the output as stated above to the input of the following fixture and so on. A quick note: Often, the setup for Master- Slave and Standalone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP-switches. Secondarily, the fixtures that follow may also re- quire a slave setting. Check the “Operating Adjustments” section in this manual for com- plete instructions for this type of setup and configuration. Mounting & Rigging This fixture may be mounted in any SAFE position provided there is enough room for ventilation. It is important never to obstruct the fan or vents pathway. Mount the fixture using a suitable “C” or “O” type clamp. The clamp should be rated to hold at least 10x the fixture’s weight to ensure structural sta- bility. Do not mount to surfaces with unknown strength, and ensure properly “rated” rigging is used when mounting fixtures overhead. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. • When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. • Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.

(c) 2016 Blizzard Lighting, LLC Installation LOOK™ fixtures can be set up on the ground, or mounted on truss. They can be connected and locked together top to bottom, or side by side for an elongated matrix combination. When truss mounting, always and use appropriately rated clamps to accommodate the total weight of connected fixtures, and no matter what type of configuration your choose to connect your fixtures together, always be sure that each fixture is individually secured with a safety cable. Matrix Combination: 1.) Starting with a fixture to be connected under another, loosen the rear locking knobs and slide the lock- ing plates to their outward most positions. 2.) Align and set the feet of the top fixture into the holes found on the top cover of the bottom fixture, then push the fixture slightly into its correct position. 3.) Push both rear locking slider plates fully inward, then tighten down both of the locking knobs to finish securing the fixtures together. 4.) Repeat the process to add more fixtures. Elongated Combination: 1.) Starting with a fixture to be connected to the side of another, make sure the top and bottom Lock/ Unlock hook latches are both in the unlock position. 2.) Align the sides of the fixtures, so the hook side meets the female catch. 3.) Using a 5mm allen wrench, swivel both hook latches to their lock positions. 4.) Repeat the process to add more fixtures. LOOK™ Klamp (sold separately) Modular dual Omega bracket mounting plate that fits perfectly into the top 4-peg locking mechanism of LOOK™ fixtures. Comes with plate attachment and (2) 1/4 turn Omega brackets. Contact your favorite Blizzard Lighting dealer for best pricing. Elongated Combination Matrix Combination

(c) 2016 Blizzard Lighting, LLC 4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the LOOK™ are accessed by using the control panel on the back of the fixture. There are 4 control buttons next to the menu display which allow you to navigate through the various con- trol panel menus. Is used to navigate to the previous higher-level menu item. Scrolls through menu items and numbers in ascending order. Scrolls through menu items and numbers in descending order. Is used to select and confirm/store the current selection. The control panel display shows the menu items you select from the menu map on page #12. When a menu function is selected, the display will show immedi- ately the first available option for the selected menu function. To select a menu item, press . Use the and buttons to navigate the menu options. Press the button to select the menu function currently displayed, or to enable a menu option. To return to the previous option or menu without changing the value, press the button.

(c) 2016 Blizzard Lighting, LLC Control Panel Menu Structure Main Function Sub Function Selection What It Does... STATIC COLOR Beam Red1 000 <-> 255 Beam 1 - Red Intensity (0% <-> 100%) Beam Green1 000 <-> 255 Beam 1 - Green Intensity (0% <-> 100%) Beam Blue1 000 <-> 255 Beam 1 - Blue Intensity (0% <-> 100%) Beam White1 000 <-> 255 Beam 1 - White Intensity (0% <-> 100%) Beam Red2 000 <-> 255 Beam 2 - Red Intensity (0% <-> 100%) Beam Green2 000 <-> 255 Beam 2 - Green Intensity (0% <-> 100%) Beam Blue2 000 <-> 255 Beam 2 - Blue Intensity (0% <-> 100%) Beam White2 000 <-> 255 Beam 2 - White Intensity (0% <-> 100%) Aura Red1 000 <-> 255 Aura 1 - Red Intensity (0% <-> 100%) Aura Green1 000 <-> 255 Aura 1 - Green Intensity (0% <-> 100%) Aura Blue1 000 <-> 255 Aura 1 - Blue Intensity (0% <-> 100%) Aura Red2 000 <-> 255 Aura 2 - Red Intensity (0% <-> 100%) Aura Green2 000 <-> 255 Aura 2 - Green Intensity (0% <-> 100%) Aura Blue2 000 <-> 255 Aura 2 - Blue Intensity (0% <-> 100%) AUTO Auto1 - Auto10 Auto Modes 1-10 Auto Speed 001 <-> 255 Auto Speed SOUND Sound1 Sound Active Mode 1 Sound2 Sound Active Mode 2 Sound3 Sound Active Mode 3 Sensitivity 001 <-> 100 Mic Sensitivity RUN DMX512 Set to run in DMX Mode Slave Set to run in Slave Mode ADDRESS Set DMX Address 001 <-> 512 Set the DMX Address DMX MODE Stand Mode Standard Mode (24CH) Basic Mode Basic Mode (13CH) Extend Mode Extended Mode (45CH) TEST Test Beam Beam Test Test Aura Aura Test Test All Test All Linear CTO CTO 2700K CTO 2700K CTO 3200K CTO 3200K CTO 4200K CTO 4200K CTO 5600K CTO 5600K CTO 6500K CTO 6500K CTO 7200K CTO 7200K CTO 8000K CTO 8000K CTO 10000K CTO 10000K SET White Balance ON/OFF Turn ON to use the CAL Parameter settings Dimmer Curve Gamma 1-4 Turn off or use dimming curves 1-4 Fan Control Auto/High/Low Set the fan for Auto or manual High/Low Speed Disp Setting Shut off time Set to shut off after 2-60 minutes of inactivity Flip display Flip the display Disp flash On/Off: display will flash if DMX signal is lost Factory Reset Select Yes to reset the fixture CAL Parameter Beam1 RGB Beam Red1 Beam 1 Red Color Balance Beam Green1 Beam 1 Green Color Balance Beam Blue1 Beam 1 Blue Color Balance Beam2 RGB Beam Red2 Beam 2 Red Color Balance Beam Green2 Beam 2 Green Color Balance Beam Blue2 Beam 2 Blue Color Balance INFO Time Info Power on Hours since powered on Ttl Life Hrs Total running hours Last Run Hrs Last run hours Temp Info Head 1 Temp LED 1 temperature (C) Head 2 Temp LED 2 temperature (C) Software Ver Displays software version information

(c) 2016 Blizzard Lighting, LLC DMX Mode Allows the unit to be controlled by any universal DMX controller. Set the Starting DMX Address: 1.) Navigate the main menu until you reach ADDRESS. 2.) Push the button. 3.) Use the buttons to select a DMX channel from 001-512. 4.) Press the button to confirm. Select the DMX Channel Mode: 1.) Navigate the main menu until you reach DMX MODE. 2.) Push the button. 3.) Use the buttons to select Stand Mode, Basic Mode, or Extend Mode. 4.) Press the button to confirm your selection. Master/Slave Mode: 1.) Navigate the main menu until you reach RUN. 2.) Push the button. 3.) Use the buttons to select DMX512 or Slave. 4.) Press the button to confirm your selection. Auto, Sound Active, & Manual Adjustments: Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds. Auto Mode: 1.) Navigate the main menu until you reach AUTO. 2.) Push the button. 3.) Use the buttons to select AUTO1 - AUTO10. 4.) Press the button to confirm your selection of auto mode. 5.) In the same submenu, you can also select Auto Speed to adjust the speed of the auto program from 001-255 (slow <--> fast). Sound Active Mode: 1.) Navigate the main menu until you reach SOUND. 2.) Push the button. 3.) Use the buttons to select SOUND1 - SOUND3. 4.) Press the button to confirm your selection of sound active mode. 5.) In the same submenu, you can also select Sensitivity to adjust the mic sensitivity level for the sound active program from 001-100. White Balance Adjustment: 1.) Navigate the main menu until you reach CAL Parameter, then press . 2.) Using the buttons, you can highlight and manually adjust Beam1 or Beam2 Red/Green/Blue color balance settings from 000-255. 3.) Make your selections, then hit to confirm. 4.) To use this custom setting, navigate to SET and press . 5.) Then use the buttons to select White Balance and press . 6.) Finally, press the buttons to select ON or OFF and press . 7.) If White Balance is ON, the CAL Parameter settings are active and will affect all modes. Dimming Curve Selection 1.) Navigate the main menu until you reach SET. 2.) Push the button. 3.) Use the buttons to highlight Dimmer Curve, then press . 4.) Use the buttons to highlight ON/OFF, Gamma1 (linear), Gamma2 (Gamma 1.5), Gamma3 (Gamma 2), or Gamma4 (S-Curve). 5.) Press the button to confirm your choice.

(c) 2016 Blizzard Lighting, LLC DMX Values In-Depth (45-Channel Mode) Ch. Value What It Does 1 000 <-> 255 Beam 1 Red (0% <--> 100%) 3 000 <-> 255 Beam 1 Green (0% <--> 100%) 2 000 <-> 255 Beam 1 Blue (0% <--> 100%) 4 000 <-> 255 Beam 1 White (0% <--> 100%) 5 000 <-> 255 Beam 2 Red (0% <--> 100%) 6 000 <-> 255 Beam 2 Green (0% <--> 100%) 7 000 <-> 255 Beam 2 Blue (0% <--> 100%) 8 000 <-> 255 Beam 2 White (0% <--> 100%) 9 000 <-> 009 010 <-> 053 054 <-> 098 099 <-> 116 117 <-> 143 144 <-> 187 188 <-> 223 224 <-> 249 250 <-> 255 Beam1 Linear CTO No Function 10000K 8000K 7200K 6500K 5600K 4200K 3200K 2700K 10 000 <-> 009 010 <-> 053 054 <-> 098 099 <-> 116 117 <-> 143 144 <-> 187 188 <-> 223 224 <-> 249 250 <-> 255 Beam2 Linear CTO No Function 10000K 8000K 7200K 6500K 5600K 4200K 3200K 2700K 11 000 <-> 255 Beam1 Macro Color 12 000 <-> 255 Beam2 Macro Color Beam Macro Colors (Extended Mode, CH11 and CH12): Value What is does Value What is does Value What is does 000 <--> 009 010 <--> 013 014 <-> 017 018 <-> 021 022 <-> 025 026 <-> 029 030 <-> 033 034 <-> 037 038 <-> 041 042 <-> 045 046 <-> 049 050 <-> 053 054 <-> 057 058 <-> 061 062 <-> 065 066 <-> 069 070 <-> 073 074 <-> 077 078 <-> 081 082 <-> 085 086 <-> 089 090 <-> 093 094 <-> 097 OFF Red Green Blue Cyan Yellow Magenta White 7000K White 3700K White 5000K Black Medium Yellow Straw Tint Surprise Peach Fire Medium Amber Gold Amber Dark Amber Sunrise Red Light Pink Medium Pink Pink Carnation Light Lavender 098 <-> 101 102 <-> 105 106 <-> 109 110 <-> 113 114 <-> 117 118 <-> 121 122 <-> 125 126 <-> 129 130 <-> 133 134 <-> 137 138 <-> 141 142 <-> 145 146 <-> 149 150 <-> 153 154 <-> 157 158 <-> 161 162 <-> 165 166 <-> 169 170 <-> 173 166 <-> 169 170 <-> 173 174 <-> 177 178 <-> 181 Lavender Sky Blue Just Blue Dark Yellow Spring Yellow Light Amber Straw Deep Amber Orange Light Rose English Rose Light Salmon Middle Rose Dark Pink Magenta Peacock Blue Blue Green Steel Blue Light Blue Steel Blue Light Blue Dark Green Leaf Green 182 <-> 185 186 <-> 189 190 <-> 193 194 <-> 197 198 <-> 201 202 <-> 205 206 <-> 209 210 <-> 213 214 <-> 216 217 <-> 219 220 <-> 222 223 <-> 225 226 <-> 228 229 <-> 231 332 <-> 234 235 <-> 237 238 <-> 240 241 <-> 243 244 <-> 246 247 <-> 249 250 <-> 252 253 <-> 255 Dark Green Mauve Bright Pink Medium Blue Golden Amber Pale Lavender Lavender Primary Green Bright Blue Apricot Pale Gold Deep Orange Bastard Amber Flame Red Daylight Blue Lilac Tint Deep Lavender Dark Blue Congo Blue Alice Blue Dirty White White

(c) 2016 Blizzard Lighting, LLC DMX Values In-Depth (45-Channel Mode), continued Ch. Value What It Does 13 000 <-> 031 032 <-> 063 064 <-> 095 096 <-> 127 128 <-> 159 160 <-> 191 192 <-> 223 224 <-> 225 Strobe LEDs Off LEDs On Strobe Effect (slow <--> fast) LEDs On Pulse-Effect in Sequences LEDs On Random Strobe (slow <--> fast) LEDs On 14 000 <-> 255 Beam LED Dimmer 15 000 <-> 063 064 <-> 127 128 <-> 191 192 <-> 255 32-Bit Dimming Curve1 - Gamma 1 Linear Curve2 - Gamma 1.5 Curve3 - Gamma 2 Curve4 - Gamma 4 S-Curve 16 000 <-> 099 100 <-> 114 115 <-> 129 130 <-> 144 145 <-> 159 160 <-> 174 175 <-> 189 190 <-> 204 205 <-> 219 220 <-> 234 235 <-> 255 Beam LED Auto No Function Auto1 Auto2 Auto3 Auto4 Auto5 Auto6 Auto7 Auto8 Auto9 Auto10 17 000 <-> 255 Beam LED Auto Speed (slow <--> fast) 18 000 <-> 255 Aura LED Dimmer (0% <--> 100%) 19 000 <-> 031 032 <-> 250 251 <-> 255 Aura LED Strobe LEDs Off Strobe Effect (slow <--> fast) LEDs On 20 000 <-> 007 008 <-> 019 020 <-> 031 032 <-> 043 044 <-> 055 056 <-> 067 068 <-> 079 080 <-> 091 092 <-> 103 104 <-> 115 116 <-> 127 128 <-> 139 140 <-> 151 152 <-> 163 164 <-> 175 176 <-> 187 188 <-> 199 200 <-> 211 212 <-> 223 224 <-> 235 236 <-> 255 Aura LED Effect No Function Aura Macro1 Aura Macro2 Aura Macro3 Aura Macro4 Aura Macro5 Aura Macro6 Aura Macro7 Aura Macro8 Aura Macro9 Aura Macro10 Aura Macro11 Aura Macro12 Aura Macro13 Aura Macro14 Aura Macro15 Aura Macro16 Aura Macro17 Aura Macro18 Aura Macro19 Aura Macro20 21 000 <-> 255 Aura LED Effect Speed (slow <--> fast) 22 000 <-> 255 Aura1 Red1 (0% <--> 100%) 23 000 <-> 255 Aura1 Green1 (0% <--> 100%) 24 000 <-> 255 Aura1 Blue1 (0% <--> 100%) 25 000 <-> 255 Aura1 Red2 (0% <--> 100%) 26 000 <-> 255 Aura1 Green2 (0% <--> 100%) 27 000 <-> 255 Aura1 Blue2 (0% <--> 100%) 28 000 <-> 255 Aura1 Red3 (0% <--> 100%) 29 000 <-> 255 Aura1 Green3 (0% <--> 100%) 30 000 <-> 255 Aura1 Blue3 (0% <--> 100%) 31 000 <-> 255 Aura1 Red4 (0% <--> 100%) 32 000 <-> 255 Aura1 Green4 (0% <--> 100%)

(c) 2016 Blizzard Lighting, LLC DMX Values In-Depth (45-Channel Mode), continued Ch. Value What It Does 33 000 <-> 255 Aura1 Blue4 (0% <--> 100%) 34 000 <-> 255 Aura2 Red1 (0% <--> 100%) 35 000 <-> 255 Aura2 Green1 (0% <--> 100%) 36 000 <-> 255 Aura2 Blue1 (0% <--> 100%) 37 000 <-> 255 Aura2 Red2 (0% <--> 100%) 38 000 <-> 255 Aura2 Green2 (0% <--> 100%) 39 000 <-> 255 Aura2 Blue2 (0% <--> 100%) 40 000 <-> 255 Aura2 Red3 (0% <--> 100%) 41 000 <-> 255 Aura2 Green3 (0% <--> 100%) 42 000 <-> 255 Aura2 Blue3 (0% <--> 100%) 43 000 <-> 255 Aura2 Red4 (0% <--> 100%) 44 000 <-> 255 Aura2 Green4 (0% <--> 100%) 45 000 <-> 255 Aura2 Blue4 (0% <--> 100%) DMX Values In-Depth (24-Channel Mode) Ch. Value What It Does 1 000 <-> 255 Beam 1 Red (0% <--> 100%) 3 000 <-> 255 Beam 1 Green (0% <--> 100%) 2 000 <-> 255 Beam 1 Blue (0% <--> 100%) 4 000 <-> 255 Beam 1 White (0% <--> 100%) 5 000 <-> 255 Beam 2 Red (0% <--> 100%) 6 000 <-> 255 Beam 2 Green (0% <--> 100%) 7 000 <-> 255 Beam 2 Blue (0% <--> 100%) 8 000 <-> 255 Beam 2 White (0% <--> 100%) 9 000 <-> 009 010 <-> 053 054 <-> 098 099 <-> 116 117 <-> 143 144 <-> 187 188 <-> 223 224 <-> 249 250 <-> 255 Beam Linear CTO No Function 10000K 8000K 7200K 6500K 5600K 4200K 3200K 2700K 10 000 <-> 255 Beam Macro Color Beam Macro Colors (Standard Mode, CH10): Value What is does Value What is does Value What is does 000 <--> 009 010 <--> 013 014 <-> 017 018 <-> 021 022 <-> 025 026 <-> 029 030 <-> 033 034 <-> 037 038 <-> 041 042 <-> 045 046 <-> 049 050 <-> 053 054 <-> 057 058 <-> 061 062 <-> 065 066 <-> 069 070 <-> 073 074 <-> 077 078 <-> 081 082 <-> 085 086 <-> 089 090 <-> 093 094 <-> 097 OFF Red Green Blue Cyan Yellow Magenta White 7000K White 3700K White 5000K Black Medium Yellow Straw Tint Surprise Peach Fire Medium Amber Gold Amber Dark Amber Sunrise Red Light Pink Medium Pink Pink Carnation Light Lavender 098 <-> 101 102 <-> 105 106 <-> 109 110 <-> 113 114 <-> 117 118 <-> 121 122 <-> 125 126 <-> 129 130 <-> 133 134 <-> 137 138 <-> 141 142 <-> 145 146 <-> 149 150 <-> 153 154 <-> 157 158 <-> 161 162 <-> 165 166 <-> 169 170 <-> 173 166 <-> 169 170 <-> 173 174 <-> 177 178 <-> 181 Lavender Sky Blue Just Blue Dark Yellow Spring Yellow Light Amber Straw Deep Amber Orange Light Rose English Rose Light Salmon Middle Rose Dark Pink Magenta Peacock Blue Blue Green Steel Blue Light Blue Steel Blue Light Blue Dark Green Leaf Green 182 <-> 185 186 <-> 189 190 <-> 193 194 <-> 197 198 <-> 201 202 <-> 205 206 <-> 209 210 <-> 213 214 <-> 216 217 <-> 219 220 <-> 222 223 <-> 225 226 <-> 228 229 <-> 231 332 <-> 234 235 <-> 237 238 <-> 240 241 <-> 243 244 <-> 246 247 <-> 249 250 <-> 252 253 <-> 255 Dark Green Mauve Bright Pink Medium Blue Golden Amber Pale Lavender Lavender Primary Green Bright Blue Apricot Pale Gold Deep Orange Bastard Amber Flame Red Daylight Blue Lilac Tint Deep Lavender Dark Blue Congo Blue Alice Blue Dirty White White

(c) 2016 Blizzard Lighting, LLC DMX Values In-Depth (24-Channel Mode), continued Ch. Value What It Does 11 000 <-> 031 032 <-> 063 064 <-> 095 096 <-> 127 128 <-> 159 160 <-> 191 192 <-> 223 224 <-> 225 Strobe LEDs Off LEDs On Strobe Effect (slow <--> fast) LEDs On Pulse-Effect in Sequences LEDs On Random Strobe (slow <--> fast) LEDs On 12 000 <-> 255 Beam LED Dimmer 13 000 <-> 063 064 <-> 127 128 <-> 191 192 <-> 255 32-Bit Dimming Curve1 - Gamma 1 Linear Curve2 - Gamma 1.5 Curve3 - Gamma 2 Curve4 - Gamma 4 S-Curve 14 000 <-> 255 Aura1 Red1 (0% <--> 100%) 15 000 <-> 255 Aura1 Green1 (0% <--> 100%) 16 000 <-> 255 Aura1 Blue1 (0% <--> 100%) 17 000 <-> 255 Aura1 Red2 (0% <--> 100%) 18 000 <-> 255 Aura1 Green2 (0% <--> 100%) 19 000 <-> 255 Aura1 Blue 2 (0% <--> 100%) 20 000 <-> 255 Aura LED Dimmer (0% <--> 100%) 21 000 <-> 031 032 <-> 250 251 <-> 255 Aura Strobe Aura LED turn off Aura LED Strobe (slow <--> fast) Aura LED turn on 22 000 <-> 007 008 <-> 019 020 <-> 031 032 <-> 043 044 <-> 055 056 <-> 067 068 <-> 079 080 <-> 091 092 <-> 103 104 <-> 115 116 <-> 127 128 <-> 139 140 <-> 151 152 <-> 163 164 <-> 175 176 <-> 187 188 <-> 199 200 <-> 211 212 <-> 223 224 <-> 235 236 <-> 255 Aura LED Effect No Function Aura Macro1 Aura Macro2 Aura Macro3 Aura Macro4 Aura Macro5 Aura Macro6 Aura Macro7 Aura Macro8 Aura Macro9 Aura Macro10 Aura Macro11 Aura Macro12 Aura Macro13 Aura Macro14 Aura Macro15 Aura Macro16 Aura Macro17 Aura Macro18 Aura Macro19 Aura Macro20 23 000 <-> 099 100 <-> 114 115 <-> 129 130 <-> 144 145 <-> 159 160 <-> 174 175 <-> 189 190 <-> 204 205 <-> 219 220 <-> 234 235 <-> 255 Beam LED Auto No Function Auto1 Auto2 Auto3 Auto4 Auto5 Auto6 Auto7 Auto8 Auto9 Auto10 24 000 <-> 255 Aura LED Effect & Beam LED

(c) 2016 Blizzard Lighting, LLC DMX Values In-Depth (13-Channel Mode) Ch. Value What It Does 1 000 <-> 255 Beam Red (0% <--> 100%) 3 000 <-> 255 Beam Green (0% <--> 100%) 2 000 <-> 255 Beam Blue (0% <--> 100%) 4 000 <-> 255 Beam White (0% <--> 100%) 5 000 <-> 255 Aura Red (0% <--> 100%) 6 000 <-> 255 Aura Green (0% <--> 100%) 7 000 <-> 255 Aura Blue (0% <--> 100%) 8 000 <-> 255 Beam Macro Color DMX Values In-Depth (13-Channel Mode), continued Ch. Value What It Does 9 000 <-> 007 008 <-> 019 020 <-> 031 032 <-> 043 044 <-> 055 056 <-> 067 068 <-> 079 080 <-> 091 092 <-> 103 104 <-> 115 116 <-> 127 128 <-> 139 140 <-> 151 152 <-> 163 164 <-> 175 176 <-> 187 188 <-> 199 200 <-> 211 212 <-> 223 224 <-> 235 236 <-> 255 Aura LED Effect No Function Aura Macro1 Aura Macro2 Aura Macro3 Aura Macro4 Aura Macro5 Aura Macro6 Aura Macro7 Aura Macro8 Aura Macro9 Aura Macro10 Aura Macro11 Aura Macro12 Aura Macro13 Aura Macro14 Aura Macro15 Aura Macro16 Aura Macro17 Aura Macro18 Aura Macro19 Aura Macro20 10 000 <-> 255 Aura LED Speed (slow <--> fast) Beam Macro Colors (Basic Mode, CH8): Value What is does Value What is does Value What is does 000 <--> 009 010 <--> 013 014 <-> 017 018 <-> 021 022 <-> 025 026 <-> 029 030 <-> 033 034 <-> 037 038 <-> 041 042 <-> 045 046 <-> 049 050 <-> 053 054 <-> 057 058 <-> 061 062 <-> 065 066 <-> 069 070 <-> 073 074 <-> 077 078 <-> 081 082 <-> 085 086 <-> 089 090 <-> 093 094 <-> 097 OFF Red Green Blue Cyan Yellow Magenta White 7000K White 3700K White 5000K Black Medium Yellow Straw Tint Surprise Peach Fire Medium Amber Gold Amber Dark Amber Sunrise Red Light Pink Medium Pink Pink Carnation Light Lavender 098 <-> 101 102 <-> 105 106 <-> 109 110 <-> 113 114 <-> 117 118 <-> 121 122 <-> 125 126 <-> 129 130 <-> 133 134 <-> 137 138 <-> 141 142 <-> 145 146 <-> 149 150 <-> 153 154 <-> 157 158 <-> 161 162 <-> 165 166 <-> 169 170 <-> 173 166 <-> 169 170 <-> 173 174 <-> 177 178 <-> 181 Lavender Sky Blue Just Blue Dark Yellow Spring Yellow Light Amber Straw Deep Amber Orange Light Rose English Rose Light Salmon Middle Rose Dark Pink Magenta Peacock Blue Blue Green Steel Blue Light Blue Steel Blue Light Blue Dark Green Leaf Green 182 <-> 185 186 <-> 189 190 <-> 193 194 <-> 197 198 <-> 201 202 <-> 205 206 <-> 209 210 <-> 213 214 <-> 216 217 <-> 219 220 <-> 222 223 <-> 225 226 <-> 228 229 <-> 231 332 <-> 234 235 <-> 237 238 <-> 240 241 <-> 243 244 <-> 246 247 <-> 249 250 <-> 252 253 <-> 255 Dark Green Mauve Bright Pink Medium Blue Golden Amber Pale Lavender Lavender Primary Green Bright Blue Apricot Pale Gold Deep Orange Bastard Amber Flame Red Daylight Blue Lilac Tint Deep Lavender Dark Blue Congo Blue Alice Blue Dirty White White

(c) 2016 Blizzard Lighting, LLC Troubleshooting Symptom Solution No Light Output Check to ensure fixture is operating under correct mode, IE sound active/auto/ DMX/Etc., if applicable. No Power Check fuse, AC cord and circuit for malfunction. Blown Fuse Check AC cord and circuit for damage. Slow Movement Check that speed channels are set appropriately. No Response to Audio Verify that the fixture is in “Sound Active” mode. Adjust Audio Sensitivity. Fixture Not Respond- ing / Responding Erratically Make sure all connectors are seated properly and securely. Use Only DMX Cables. Install a Terminator. Check all cables for defects. Reset fixture(s). Fixture Moving On Its Own Verify proper mode of operation. Is the fixture in “Auto” mode? DMX Values In-Depth (13-Channel Mode), continued Ch. Value What It Does 11 000 <-> 031 032 <-> 063 064 <-> 095 096 <-> 127 128 <-> 159 160 <-> 191 192 <-> 223 224 <-> 225 Strobe LED turn off LED turn on Strobe effect (slow <--> fast) LED turn on Pulse-effect in sequences LED turn on Random strobe effect (slow <--> fast) LED turn on 12 000 <-> 255 Dimmer (0% <--> 100%) 13 000 <-> 063 064 <-> 127 128 <-> 191 192 <-> 255 32-Bit Dimming Modes Curve1 - Gamma 1 Linear Curve2 - Gamma 1.5 Curve3 - Gamma 2 Curve4 - Gamma 4 S-Curve Aura 2 LED 4 Aura 1 LED 2 Beam 2 Aura 2 LED 3 Aura 1 LED 3 Aura 2 LED 1 Aura 1 LED 4 Aura 2 LED 2 Aura 1 LED 1 Beam 1

(c) 2016 Blizzard Lighting, LLC 5. APPENDIX A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to lighting dimmer modules. It was revised in 1990 and again in 2000 to allow more flexibility. The Entertainment Services and Technology Association (ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized for ANSI standard clas- sification. DMX covers (and is an abbreviation for) Digital MultipleXed signals. It is the most common communications standard used by lighting and related stage equipment. DMX provides up to 512 control “channels” per data link. Each of these channels was origi- nally intended to control lamp dimmer levels. You can think of it as 512 faders on a lighting console, connected to 512 light bulbs. Each slider’s position is sent over the data link as an 8-bit number having a value between 0 and 255. The value 0 corresponds to the light bulb being completely off while 255 corresponds to the light bulb being fully on. DMX data is transmitted at 250,000 bits per second using the RS-485 transmission stan- dard over two wires. As with microphone cables, a grounded cable shield is used to prevent interference with other signals. There are five pins on a DMX connector: a wire for ground (cable shield), two wires for “Primary” communication which goes from a DMX source to a DMX receiver, and two wires for a “Secondary” communication which goes from a DMX receiver back to a DMX source. Generally, the “Secondary” channel is not used so data flows only from sources to receiv- ers. Hence, most of us are most familiar with DMX-512 as being employer over typical 3-pin “mic cables,” although this does not conform to the defined standard. DMX is connected using a daisy-chain configuration where the source connects to the input of the first device, the output of the first device connects to the input of the next device, and so on. The standard allows for up to 32 devices on a single DMX link. Each receiving device typically has a means for setting the “starting channel number” that it will respond to. For example, if two 6-channel fixtures are used, the first fixture might be set to start at channel 1 so it would respond to DMX channels 1 through 6, and the next fixture would be set to start at channel 7 so it would respond to channels 7 through 12. The greatest strength of the DMX communications protocol is that it is very simple and robust. It involves transmitting a reset condition (indicating the start of a new “packet”), a start code, and up to 512 bytes of data. Data packets are transmitted continuously. As soon as one packet is finished, another can begin with no delay if desired (usually another follows within 1 ms). If nothing is changing (i.e. no lamp levels change) the same data will be sent out over and over again. This is a great feature of DMX -- if for some reason the data is not interpreted the first time around, it will be re-sent shortly. Not all 512 channels need to be output per packet, and in fact, it is very uncommon to find all 512 used. The fewer channels are used, the higher the “refresh” rate. It is possible to get DMX refreshes at around 1000 times per second if only 24 channels are being trans- mitted. If all 512 channels are being transmitted, the refresh rate is around 44 times per second. In summary, since its design and evolution in the 1980’s DMX has become the standard for lighting control. It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer.

(c) 2016 Blizzard Lighting, LLC Keeping Your LOOK™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equip- ment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks. Cleaning the optics routinely with a suitable glass cleaner will greatly improve the quality of light output. Keeping the fans free of dust and debris will keep the fixture running cool and prevent damage from overheating. In transit, keep the fixtures in cases. You wouldn’t throw a prized guitar, drumset, or other piece of expensive gear into a gear trailer without a case, and similarly, you shouldn’t even think about doing it with your shiny new light fixtures. Common sense and taking care of your fixtures will be the single biggest thing you can do to keep them running at peak performance and let you worry about designing a great light show, putting on a great concert, or maximizing your cli- ent’s satisfaction and “wow factor.” That’s what it’s all about, after all! Returns (Gasp!) We’ve taken a lot of precautions to make sure you never even have to worry about sending a defective unit back, or sending a unit in for service. But, like any complex piece of equipment designed and built by humans, once in a while, something doesn’t go as planned. If you find yourself with a fixture that isn’t behaving like a good little fixture should, you’ll need to obtain a Return Authori- zation (RA). Don’t worry, this is easy. Just go to our website and open a support ticket at www.blizzardlighting.com/support, and we’ll issue you an RA. Then, you’ll need to send the unit to us using a trackable, pre-paid freight method. We suggest using USPS Priority or UPS. Make sure you carefully pack the fixture for transit, and whenever possible, use the original box & packing for shipping. When returning your fixture for service, be sure to include the following: 1.) Your contact information (Name, Address, Phone Number, Email address). 2.) The RA# issued to you 3.) A brief description of the problem/symptoms. We will, at our discretion, repair or replace the fixture. Please remember that any shipping damage which occurs in transit to us is the customer’s responsibil- ity, so pack it well! Shipping Issues Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt.

(c) 2016 Blizzard Lighting, LLC Tech Specs! Weight & Dimensions Width 11.8 inches (300 mm) Depth 9.4 inches (237 mm) Height 5.1 inches (130 mm) Weight 15.4 lbs. (7 kg) Power Operating Voltage 100V-240VAC, 50-60Hz Power Consumption 198W, 1.64A, PF:.99 Light Source LED 2x 60W RGBW 4-in-1 LEDs 2x 4-segment (16 x 0.5W RGB 3-in-1 LEDs) Optical Beam Angle 4.5 degree beam Luminous Intensity Lux/m Red Green Blue White All 1m 15,710 13,150 19,500 22,280 72,300 2m 6,750 5,590 7,850 11,070 28,240 3m 2,969 2,881 3,835 4,980 13,510 4m 1,822 1,692 2,356 2,750 7,280 5m 1,112 990 1,463 1,769 4,560 Thermal Max. Operating Temp. 104 degrees F (40 degrees C) ambient Control Protocol USITT DMX-512 DMX Channels 13/24 or 45-channel DMX modes Input 3 and 5-pin XLR Male Output 3 and 5-pin XLR Female Other Operating Modes Standalone, Master/Slave, Sound Active, Color Preset Other Information Opinion - 3.14 = Onion Warranty 2-year limited warranty, does not cover malfunction caused by damage to LEDs. DISCLAIMER: The power connectors fitted to the fixture and fixture cord are designed for compatibility with products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and power- CON® are registered trademarks of Neutrik AG.

(c) 2016 Blizzard Lighting, LLC Dimensional Drawings 5.6” (143 mm) 3.6” (90 mm) 11.8” (300 mm) 5.1” (130 mm) .59” (15 mm) 13.1” (332 mm) 9.4” (237 mm)