Fusion MS-WR600 User & Installation Manual

MARINE WIRED REMOTE CONTROL MS-WR600 www.fusionelectronics.com FUSION Electronics New Zealand Ph: +64 9 369 2997 FUSION Electronics Australia Ph: +61 1300 736 012 FUSION Electronics Europe Ph: +44 1268 889580 FUSION Electronics USA Ph: +1 623 580 9000 PUBLISHED BY FUSION ELECTRONICS LIMITED: ©Copyright 2008 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice. YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non- working electrical equipment to an appropriate waste disposal center. COMPATIBLE WITH MS-CD600, MS-AV600 AND MS-IP600

SOURCE Press to select the desired source. Radio (FM-AM-SIRIUS) - DVD/CD/MP3 - iPod - AUX (SIRIUS - USA only) MUTE Short Press Press to Mute/Un-Mute sound in all zones. Press and Hold To enter configuration menu. MENU Press to enter menu system. Press to return to previous screen. PLAY/PAUSE Play/Pause track in DVD/CD/MP3 and iPod mode. ROTARY ENCODER Turn To adjust volume, move up or down a menu structure, or adjust a specific setting item. Press To select a highlighted option, confirm a setting. BACK/PREVIOUS Short Press DVD/CD/MP3/iPod - Select the previous track. AM/FM/Sirius - Start tuning down the frequency spectrum. (Auto/Manual tuning mode) or previous preset (Preset mode). Press and Hold DVD/CD/MP3/iPod - Rewind the current track. FORWARD/NEXT Short Press DVD/CD/MP3/iPod - Select the next track. AM/FM/Sirius - Start tuning up the frequency spectrum. (Auto/Manual tuning mode) or next preset (Preset mode). Press and Hold DVD/CD/MP3/iPod - Fast forward the current track. OPERATION ASSIGNING THE REMOTE TO A ZONE Press and hold the ‘Mute’ button for 5-6 seconds. Select ‘Assign Zone’. Select zone to allocate remote too. (Zone 1, Zone 2, Zone 3, Zone 123). Press the ‘Menu’ button to exit. SUB LIMIT Press the ‘Menu’ button and select ‘Sub Limit’. Turn the ‘Rotary Encoder’ to adjust level. Press the ‘Menu’ button to exit. ZONE VOLUME Turn the ‘Rotary Encoder’ to adjust the volume in the assigned zone. BACKLIGHT BRIGHTNESS Press and hold the ‘Menu’ button while turning the ‘Rotary Encoder’ to adjust. Standby Mode After a period of inactivity the remote enters standby mode, reducing the backlight brightness. (Default) To switch the backlight off in standby mode (Power save), press and hold the ‘Mute’ button for 5-6 seconds. Select ‘Backlight’. Select ‘Off’. Press the ‘Menu’ button to exit. INSTALLATION RECORD YOUR PRODUCT DETAILS HERE: Model Number Date Of Purchase Affix Receipt Here To complete the ultimate marine audio experience, a total of three MS-WR600 Marine Wired Remote Controls can be installed in various locations, creating a flexible zone control solution throughout a vessel. The MS-WR600 is a plug and play device. Connect to the CANbus cable connection on your FUSION Marine Stereo. Please refer to the MS-CD600/MS-AV600/MS-IP600 Marine Stereo manual for further detailed operation instructions. Option 1: Recommended installation. Option 2: Requires a Y Splitter Cable (MS-WR600Y, sold separately). Cables from the splitter (*) to each remote must be of equal length to ensure correct operation. Note: The supplied ‘Terminator Plug’ must be fixed to the last remote. Failure to do so could effect operation. Optional Accessory: MS-WR600EXT6 - 6m extension lead. MS-WR600Y - Y Splitter Cable OPTION 2 TERMINATOR PLUG TERMINATOR PLUG MS-WR600Y * * OPTION 1 TERMINATOR PLUG