Cisco 7965 Reference Manual

Model depicted is a 7965 Date and Time Masking Number Programmable Buttons Phone line(s), BLF (Busy Lamp Field), or Features Foot Stand Button Raise/Lower incline Display Wake-Up Button Voice Mail (access) Navigation Pad Provides 4-way navigation. Center Select button. Soft Keys Last line of the display (Soft Key labels) correspond to Soft Key buttons directly below the display. Use buttons to activate features. Handset Light Strip Indicates an incoming call or when lit, a new voice mail message Directories Phone Help Settings Services Volume Control Tap bar to increase/decrease. Independently controls incoming volume, not outgoing volume:  Handset and headset (adjust while off-hook)  Speaker volume (adjust while off-hook)  Ringer volume (adjust while on-hook) Dial Pad Headset Mute On/Off Button lights when microphone is muted. Speaker On/Off Status Line Call Activity Area Displays current calls per line and information Display Icon Description Phone on-hook, no activity Phone off-hook, making/receiving a call Connected call Incoming call, line is ringing Call on-hold Call Forward is enabled Shared line in use. Someone who shares your line has a connected call. 7900R (Revised 11/19/2013) www.its.ny.gov/telecommunications

Cisco 7900 How To... Directions... Place a Call Internal and External: 1. Lift handset or press the Speaker button. 2. Dial the 10-digit number. To make a second call: 1. While on active call, press Hold soft key to hold first call. 2. Press New Call soft key. After dial tone, dial 10-digit number. To pre-dial: 1. With handset on-hook, begin entering 10-digit number. 2. A history of pre-dialed numbers displays. To select one, use the Navigation Pad. 3. Highlight the desired number, and press the Dial soft key. To correct a dialing error, press the < (backspace) soft key to erase. Soft Keys Available features (soft keys) appear across the bottom of your display in groups of four, and change according to your activity. The phone may have more than four available features. To view additional features, press the More soft key. To use, press the corresponding soft key located directly below the features. Redial Press Redial soft key to redial last number dialed. To view Placed Calls log: 1. While on-hook, press the Navigation Pad up/down. 2. Highlight desired number. 3. Press Dial soft key. Hold and Resume To Hold: Press the Hold soft key. Note the display icon indicating the call is on hold (paused). To Resume: Press the Resume soft key, to reconnect the highlighted call. To answer second incoming call, press the Answer soft key. The first call is automatically placed on hold, and you are connected to the second call. When multiple calls are on hold, use the Navigation Pad to highlight the appropriate call. Then, press Resume. iDivert iDivert sends a call to voicemail To use, press the iDivert soft key. Join Join joins two existing calls together on one line: 1. From an active call, press the Answer soft key. Use the Navigation Pad to highlight the call to be included in the conference. 2. Press the Join soft key to connect the two calls together. 3. Repeat this step for each call to be added. It may be necessary to press the More soft key to see Join. Park To Park a call and for retrieval at another phone: 1. While on active call, press the Park soft key. The LCD screen displays the call park number (i.e. *XXXX). 2. Make a note of the number and hang up. Call will time out in 120 seconds and ring back to original phone. To retrieve a parked call from any phone, dial * and the 4-digit number. www.its.ny.gov/telecommunications

www.its.ny.gov/telecommunications How To... Directions... Transfer 1. While connected, press Transfer soft key. Call is automatically placed on hold. A new line is automatically activated, and a dial tone is heard. 2. Dial the number to which you want to transfer. 3. While second line is ringing, you may perform either: a. Supervised Transfer (preferred): Wait on line to announce the call. Then press Transfer to connect the two callers. b. Unsupervised Transfer: Press Transfer to connect the call and complete the transfer. To cancel a transfer: 1. Use the Navigation Pad to highlight the original call. 2. Press the Resume soft key to reconnect to the original call. Transfer to Unity Voice Mail To Transfer a call directly to Unity Voice Mail: 1. While connected, press Transfer soft key. 2. Dial * and the 10-digit number where the call should be transferred. 3. Press Transfer soft key. Conference Call 1. While connected, press Confrn soft key. Call is automatically placed on hold. A new line is automatically activated, and a dial tone is heard. 2. Dial number of second party. Wait for second call to connect, and announce conference. 3. Press Confrn to add party to the conference call. 4. To remove last party, press End Call soft key. Repeat steps to conference up to four parties, including you. ConfList lists all conference parties. Abbreviated/ Speed Dial All Abbreviated/Speed Dial configuration MUST be done via the Self Care Portal. To use a Speed Dial code, : 1. With the handset down, enter the Abbreviated/Speed Dial code. 2. Press the AbbrDial soft key. 3. Lift handset. Call Forward To activate: 1. Press CFwdALL soft key, and enter desired number. 2. To cancel, press CFwdALL soft key. To forward All Calls to Voice Mail (optional): 1. Press CFwdALL soft key. 2. Press Messages button. Display status: “Forwarded to Voicemail” 3. To cancel forwarding to Voice Mail, press CFwdALL soft key. Pick Up To answer call in Your PickUp group: 1. Lift handset. 2. Press PickUp soft key to be connected to the incoming call: a. To answer call, press Answer soft key. b. To divert to your voicemail, press Divert soft key. c. To send call back to original called number, let call ring.

How To... Directions... Call Logs To view Call Logs of missed, placed and received calls: 1. Press the Directories button. Call Logs are displayed: ● Missed Calls ● Received Calls ● Placed Calls ● Personal Directory ● Corporate Directory 2. Use the Navigation Pad to highlight the desired Call Log. 3. Press Soft Key button option: a. Select: Selects the highlighted Call Log, and collected call records are displayed. b. Clear: Erases ALL call records within the highlighted Call Log. c. Exit: Exits the Directories menu. 4. Use Navigation Bar to highlight desired Call Record. Soft Keys provide the following choices: a. Dial: Dials the number. b. EditDial: Allows editing of call record. c. Exit: Exits the Directories menu. d. Details: Displays call information. e. Delete: Deletes highlighted Call Record. f. More: Displays additional Soft Keys. g. Clear: Erases ALL call records in Call Log. Each log stores up to 100 records. Details includes the following call record information, when available: ● Called number ● Calling number ● Time of day ● Call duration (for placed and received calls only) If a single call record is highlighted and Delete is pressed, only the single call record is erased. Directories a. Personal Directory b. Corporate Directory To Access the Directories Menu: 1. Press Directories button. 2. Use the Navigation Pad to scroll, highlight Personal Directory or Corporate Directory. 3. Press Select soft key to choose. Use Navigation Pad to scroll through search choices (first/last name, nickname, or number, where applicable). Use the dial pad to enter letters or numbers. See your System Administrator for your user ID and PIN, to access the Personal Directory. Settings  Preferences a. Ringtone b. Contrast To access the Settings Menu: 1. Press Settings button. 2. Use the Navigation Pad to scroll through the menu. 3. Highlight Preferences, and press Select. 4. Use Navigation Pad to scroll to desired menu (Rings, Contrast). 5. Press Select soft key. Press soft keys to Save or Select desired changed options prior to pressing Exit. Help 1. For Help, press the ? Button. 2. Press a button or feature for which you need help, or wait for Help Topics to appear in the display. Corresponding help will appear in the display. 3. Use soft keys for more choices. For a list of Help topics, press the ? button twice. www.its.ny.gov/telecommunications