funtronic floor Operation & User’s Manual

WSZELKIE PRAWA ZASTRZEŻONE 13 WARNING Scheduler�can�be�activated�only�by�Funtronic�Service�Centre.�If�needed�please�contact�us. 3.5.3 3.5.4 Warning! After�selecting�EXTERNAL�VIDEO�INPUT�the�functionality�of�Funtronic Floor is automatically switched off. To re-use the functionality of the Funtronic Floor turn the device off and on again. This process may take several minutes due to the�need�to�cool�the�lamp�in�the�projector. The Option EXTERNAL VIDEO INPUT allows to connect an external PC�to�the�projector�bu ...

12 Option menu Selections are is made using the remote control. Take the remote control, point�it�towards�the�device�and�pressing�arrow�(left,�right,�up,�down)�select� the desired option. Press OK�to�confirm�selection.�Press�EXIT to return to the previous screen. 3.5 3.5.1 3.5.2 Option ADJUST HEIGHT allows the user to choose the height of the device�above�the�floor�(distance�between�floor�and�front�panel�of�the� device).�Confirm�selection�with�OK�button.�This�adjustment�should�be� done only dur ...

12 Option menu Selections are is made using the remote control. Take the remote control, point�it�towards�the�device�and�pressing�arrow�(left,�right,�up,�down)�select� the desired option. Press OK�to�confirm�selection.�Press�EXIT to return to the previous screen. 3.5 3.5.1 3.5.2 Option ADJUST HEIGHT allows the user to choose the height of the device�above�the�floor�(distance�between�floor�and�front�panel�of�the� device).�Confirm�selection�with�OK�button.�This�adjustment�should�be� done only dur ...

8 Optional installation of Audio and LAN Funtronic Floor�has�a�built-in�Audio�port�(for�external�loudspeaker�system)�and�a�LAN� port�(for�the�internet�access). Therefore we recommend additionally: to connect Funtronic Floor to the internet via a LAN cable ending with a RJ-45 port located on the top panel of the unit or via an optional WiFi wireless USB network adapter�(to�be�purchased�optionally). ATTENTION The size of the image depends on the height at which the device will be hung. The higher Funtronic Floor is mounted the b ...

User manual 2.5 www.funtronic.eu www.funtronic.eu ...

ALL RIGHTS RESERVED 7 Device mounting Funtronic Floor should be hung on the supplied ceiling hanger. To install the Funtronic Floor properly, the user should proceed with the following steps: STEP 1 Provide voltage with a grounded electrical outlet mounted on the ceiling next to the Funtronic Floor device location. STEP�2� �Mount�the�provided�hanger�on�the�ceiling�using�4�(four)�anchors.�For� different types of ceilings it may be necessary to use different mounting methods of the hanger. STEP 3 Hang the Funtronic Floor�on�the�mounted� ...