bioMetric SpinalPak Complete Manual

The�Biomet®�SpinalPak® Non-invasive�Spine�Fusion�Stimulator�System�includes�two�rechargeable�battery�packs.� Upon�receipt,�it�is�recommended�that�the�second�battery�pack�be�immediately�placed�into�the�charger�cradle�and�fully� charged.�In�the�meantime�the�first�battery�pack�may�be�used�to�begin�your�treatment. Note: The first battery pack may not provide a 24-hour treatment initially. It is recommended that the patient keep one battery pack in the bat ...

mobile RF communications equipment and the Biomet® SpinalPak® Non-invasive Spine Fusion Stimulator System The�Biomet®�SpinalPak® Non-invasive�Spine�Fusion�Stimulator�System�is�intended�for�use�in�an� electromagnetic�environment�in�which�radiated�RF�disturbances�are�controlled.�The�customer�or�the�user� of�the�Biomet®�SpinalPak®�Non-invasive�Spine�Fusion�Stimulator�System�can�help�prevent�electromagnetic� interference�by�maintaining�a�minimum�d ...

The� Biomet®� SpinalPak®� Non-invasive� Spine� Fusion� Stimulator� System� is� activated� as� soon� as� a� charged�battery�pack�is�inserted.�The�button�located�below�the�LCD�display�enables�or�disables�the� audible�alarm.�During�an�alarm�condition,�depressing�the�button�quickly�(0.5�seconds)�will�temporarily� disable�the�audible�alarm.�Depressing�the�button�for�a�longer�period�of�time�(3�seconds)�will�toggle� the�audible�alarm� ...

The�Biomet®�SpinalPak® Non-invasive�Spine�Fusion�Stimulator�System�includes�two�rechargeable�battery�packs.� Upon�receipt,�it�is�recommended�that�the�second�battery�pack�be�immediately�placed�into�the�charger�cradle�and�fully� charged.�In�the�meantime�the�first�battery�pack�may�be�used�to�begin�your�treatment. Note: The first battery pack may not provide a 24-hour treatment initially. It is recommended that the patient keep one battery pack in the bat ...

Caution: Federal Law (U.S.A.) restricts this device to sale by or on the order of a physician. Rx Only. 2 �This�device�is�not�intended�for�re-sale�or�re-distribution.�Single�patient�use. DESCRIPTION The�Biomet®�SpinalPak® Non-invasive�Spine�Fusion�Stimulator�System�(Figure�1)�promotes�healing� by�inducing�a�low�electrical�current�at�the�fusion�site.�The�therapeutic�signal�generates�a�low�energy� electrical�field�by�passing�a�specific�c ...

RECOMMENDED USAGE The� Biomet®� SpinalPak®� Non-invasive� Spine� Fusion� Stimulator� System� is� designed� to� deliver� 270� days�of�continuous�therapeutic�treatment�for�24�hours�per�day.�The�recommended�daily�therapeutic� treatment�is�continuous�for�24�hours. OPERATING INSTRUCTIONS The�Biomet®�SpinalPak®�Non-invasive�Spine�Fusion�Stimulator�System�has�been�specifically�designed� to�be�convenient�to�use,�comfortable�to�wear,�and�safe�to�operate.�Patients�sh ...

The�Biomet®�SpinalPak®�Non-invasive�Spine�Fusion�Stimulator�System�is�intended�for�use�in�the� electromagnetic�environment�specified�below.�The�customer�or�the�user�of�the�Biomet®�SpinalPak® Non-invasive�Spine�Fusion�Stimulator�System�should�assure�that�it�is�used�in�such�an�environment. Immunity�test IEC 60601 test�level Electromagnetic�environment�- guidance Conducted RF IEC 61000-4-6 Not�Applicable �NOTE�1.�� At�80�MHz ...

Each�day,�preferably�at�the�same�time�to�ensure�treatment� is� continued� without� interruption,� patients� should� do� the�following: A.� �Depress�the�latch�(1)�on�the�battery�door�and�slide� down�the�battery�door�on�the�back�of�the�stimulator� (2)�and�remove�the�depleted�battery�pack�(Figure�7). B.�� �Following�the�arrows,�place�the�depleted�battery�pack� into� the� battery� charger� cradle� (1,� 2)� for� charging� (Figure� ...