GATEMAN A200-CH Manual 

Designed by iRevo in Korea MICRO SD CARD Install the Front Body on the outside of Door. Install the Back Body on the inside of door. Quick Guide Manual Digital Door Lock A200 -CH Keypad(10- Key) Pull bar 1 2 3 4 Reset Emergency power supply terminal 5 6 7 Battery Change Lamp CardKey reader 8 9 1.5V AA Alkaline batteries SD Card Slot Registration button 10 11 12 13 14 15 16 17 18 19 20 21 Volume switch Internal forced lock switch Lock status check lamp Push bar Safe button Battery cover Auto / Manual relock setting button Slot for Remote controller module (Option) Mortise Door status check sensor Hook deadbolt Double swing latch bolt Front Back Must Read This 7 9 10 11 12 13 15 14 16 20 21 17 8 18 19 (Separate purchase) 1 4 3 2 6 5 ※ This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. ※ This product(A200-CH) is Z-Wave security enabled device. ※ Security Enabled Z-Wave Controller must be used in order to fully utilize this product. Parts - Front (Front body) Parts - Back (Main body) ※ SD Card Slot can be used for camera function adopted models only. Please do not put anything, if product is not a camera model.

Master Mode Rotation area to add more features. Touch the keypad of the Front Body with your palm to begin. Enter Master Code (4~10digits). Enter User Code (4~10digits). Enter Visitor Code (Only 4 digits). Press (Registration)button inside the Battery Cover. Enter User Fingerprint (Up to 20EA) User Slot Number should be 2 digits. Press button on the Touchscreen. Press button on the Touchscreen. Enter Onetime Code (Only 4 digits). F U PIN CODE M PIN CODE V PIN CODE O PIN CODE UN Fingerprint Register Register 1 2 3 4 5 6 7 8 9 10 11 12 New OR OR U PIN CODE Ｖ PIN CODE Register Delete Up to 20EA Deleted automatically after using one time the code U PIN CODE Visitor Code Delete All Card Keys Delete Ｕ PIN CODE OR OR OR O PIN CODE Register Delete U PIN CODE U PIN CODE Onetime Code Ｕ PIN CODE Ｕ PIN CODE DoorLock Setting Change Mode U PIN CODE New M PIN CODE Again M PIN CODE OR OR Register Delete U PIN CODE Remote Controller Ｕ PIN CODE Add (Include) Delete (Exclude) Reset Locally Controller OR Ｕ PIN CODE U PIN CODE SET button OR Add Cont -roller User Code Continue / Complete Remote controller SET button Master Code: The Master Code is used for programming and for feature settings. It must be created prior to programming the lock. The Master Code will also operate(unlock/lock) the lock. User Code: The User Code is used for operating the lock. Maximum number of user codes are 30. Visitor Code: The Visitor Code is used for temporary visitors. The Code is different from User Code. Onetime Code: The Code can be used for just one time. It will be deleted after being used. User Number : The User Number is given to each user, and it's for Master Code holder to manage. Normal Mode Master Code Change 1 2 3 4 5 6 7 8 9 10 11 12 OR OR M PIN CODE M PIN CODE M PIN CODE U PIN CODE User Code Onetime Code M PIN CODE Delete All Credentials OR DoorLock Setting M PIN CODE M PIN CODE OR OR M PIN CODE Card Key UN UN UN UN OR OR M PIN CODE O PIN CODE M PIN CODE UN 01∼30 UN 01∼20 M PIN CODE OR OR M PIN CODE Remote Controller Controller OR M PIN CODE M PIN CODE UN UN UN 01∼05 New Again U PIN CODE New U PIN CODE Again OR Register Delete Register Delete Register Delete Change Mode Register Delete Add (Include) Delete (Exclude) Delete SET Button OR Add Cont -roller Continue / Complete ※ Information about association group 1. Grouping : 1 available 2. Group identifiler : 1 3. Maximum number of devices : 5 4. Description : Z-Wave Plus Lifeline 5. This product should be in group 1. It does not support to control other devices. ※ Information about configuration parameters Configuration Parameter Silent mode on/off Auto Relock on/off Relock time level control, 1, 2, 3 default is 3 1 and 3 for models with no spoken prompts default is 3 or high 0 x 00 = OFF, 0 x FF = ON default is 0 x 00 or OFF 10 to 180 seconds default is 30 seconds 1 2 3 1 1 1 Description Parameter Number Size (byte) Reset Locally • Network Module Setting: This setting becomes available through the Main Menu(9) and allows the lock to connect with Controllers. • Reset locally : Z-Wave Module exclusion by compulsion. • To include to a Z-Wave network: 1. Touch keypad with palm 2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.) 3. Press 'R' button [Registration] from the inside of battery cover. 4. Press 9,#,1,# on the keypad (by sequence) 5. Wait until 'Ding dong dang' melody play than press 'R' button [Registration] • To exclude to a Z-Wave network: 1. Touch keypad with palm 2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.) 3. Press 'R' button [Registration] from the inside of battery cover. 4. Press 9,#,3,# on the keypad (by sequence) 5. Wait until 'Ding dong dang' melody play than press 'R' button [Registration] • To reset to factory defaults: ※ Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. (User code or master code remains the same. Only network settings reset to factory defaults.) 1. Touch keypad with palm 2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.) 3. Press 'R' button [Registration] from the inside of battery cover. 4. Press 9,#,9,# on the keypad (by sequence) 5. Wait until 'Ding dong dang' melody play than press 'R' button [Registration]