Danfoss AB-QM Installation Manual
Read Online
Read the Danfoss AB-QM Installation Manual online using the built-in PDF viewer.
Text of the manual
AB-QM (DN 10-32) Setting tool
Heating Solutions
VI.BP.G1.00
SMT/SI
Setting procedure:
Step 1a. Positioning of pre-setting tool
Setting procedure:
Step 1b. Positioning of pre-setting tool
Setting procedure:
Step 2. Mounting of lower part (1/2 turn)
Setting procedure:
Step 3a. Pre-setting (factory setting is 100%)
Position of indicator ring
Button up
Button rotating of desired setting
Button down
Step 3b. Pre-setting (factory setting is 100%)
Setting procedure:
Step 4. Demounting the tool
Button up
Shut off the valve
- rotate button
Position of indicator ring
Button down
Rotate on desired setting
Unscrew the nut
Disconnect the tool
Installation Guide
AB-QM (DN 10-32) Setting tool
VI.BP.G1.00
Produced by Danfoss A/S © 11/2011
