BCM Advanced Research 71172 Quick Installation Manual

Intel® Socket LGA1151 6th Generation Core i7/i5/i3 CPU (Sky Lake) 7th Generation Core i7/i5/i3 CPU (Kaby Lake) uATX Motherboard Quick Installation Guide Version 1.01 http://www.bcmcom.com • Inspect the Package: One RX110H Motherboard Two SATA Cable One I/O Shield • Responsibility: This manual is provided “As-Is” with no warranties of any kind, it will neither expressed or implied, including, but not limited to the implied warranties or conditions of this product’s fitness for any particular purpose. In no event shall we be liable for any loss of profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential damages of any kind, even the possibility of such damages arising from any defect or error in this manual or product. We reserve the right to modify and update the user manual without prior notice. WARNING: CMOS Battery Damage Replace your system’s CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery type to avoid risk of personal injury or physical damage to your equipment. Always dispose of used batteries according to the manufacturer’s instructions, or as required by the local ordinance (where applicable). The damage due to not following this warning will void your motherboard’s manufacturer warranty. Perchlorate Material- Special Handling May Apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ ATTENTION: Incorrect BIOS Setup If you do not know how to handle BIOS setup or how to set it up properly, it is strongly advisable that you do not modify any of the settings than otherwise instructed in the User’s Quick Start Card. Even a seemingly small incorrect adjustment or modification in the BIOS setup can render your system unstable or unusable. The incorrect BIOS setup is not covered by your motherboard’s manufacturer warranty. • Additional Information: Additional information on setting this board up can be found in the User’s Manual in the provided CD- ROM. The Online User’s Manual and FAQ/Knowledge Base can be found on our website by visiting our website: http://www.bcmcom.com. If your question is not answered in our FAQ/Knowledge Base, visit our forums and post your messages or submit a new FAQ through FAQ Submittal form for us to add your question in our FAQ with our answer. WARNING: Electrostatic Sensitive Device (ESD) Static electricity can easily damage your motherboard and will void your motherboard warranty. Keep the motherboard and other system components in their anti-static packaging until you are ready to install them. Touch a grounded surface before you remove any system component from its protective anti-static packaging. Unpacking and installation should be done on a grounded, anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same points as the anti-static mat. During configuration and installation touch a grounded surface frequently to discharge any static electrical charge that may have built up in your body. Avoid touching the components when handling the motherboard or a peripheral card. Handle the motherboard and peripheral cards either by the edges or by the peripheral card case-mounting bracket. WARNING: Misplaced Jumper Damage Incorrect setting jumpers and connectors may lead to damage to your motherboard and will void your motherboard warranty. Please pay special attention not to connect these headers in wrong directions. DO NOT change ANY jumpers while the motherboard has the power! Motherboard Layout: • Board Layout:

Item Name Function Description 1 PS2_KBMS1 PS/2 Mouse Connector PS/2 Mouse Connection. 2 DP1 Display Port 1 This port provides Display Port connection. 3 COM1 Serial COM Port 1 This port provides serial port connection. (RS232 (default), RS422, RS485 Selection available under BIOS) 4/5 LAN1/ LAN2 Gigabit LAN (RJ-45) Connectors This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. ACT/Link LED Speed LED Status Description Status Description OFF No link OFF 10Mbps connection ON Linked Orange 100Mbps connection Blinking Data activity Green 1Gbps connection 6 AUDIO Line-in port (Light blue) This port connects a tape, CD, DVD player, or other audio sources. 7 AUDIO Line-out port (Green) This port connects a headphone or a speaker. 8 AUDIO Microphone port (Pink) This port connects a microphone. 9 USB3_45 USB 3.0 Connectors These two Universal Serial Bus (USB) ports are available for connecting USB 3.0 devices. 10 USB2_89 USB 2.0 Connectors These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 11 DVI1 DVI Video Port This port provides DVI-D (Display Visual Interface) display connection. 12 DP2 Display Port 2 This port provides Display Port connection. 13 KBMS PS/2 Keyboard Connector PS/2 keyboard Connection. Connectors, Jumpers, & Headers 1. COM1 Pin#9 Power Setting Jumper: PWR_COM1 2. Rear I/O USB Ports Power Setting Jumpers: USB2_PWR1 (For USB2.0 Port “USB2_89”), USB3_PWR1 (For USB3.0 Port “USB3_45”) 3. 4-Pin ATX Power Connector: ATX12V1

5. CPU Fan Connector: CPU_FAN1 6. Reserved for Factory Use Only: PWR_LOSS1 7. 24-Pin ATX Power Connector: ATXPWR1 8. USB Power Setting Jumper: USB3_PWR2 (For USB3.0 Port “USB3_3_4”) 9. USB3.0 Header: USB3_3_4 10. SATA3 Connectors: SATA3_1, SATA3_2, SATA3_3, SATA3_4

13. GPIO Signals Pull-High/ Pull-Low Selection: JGPIO_SET1 14. Digital Input/ Output Header: JGPIO1 15. Reserved for Factory Use Only: SPI2 16. Chassis Fan Connector 2: CHA_FAN2

18. System Panel Header: PANEL1 19. Chassis Intrusion Headers: CI1, CI2 20. USB2.0 Headers: USB2_0_1, USB2_2_3 21. Clear CMOS Header: CLRMOS1 22. USB Ports Power Setting Jumpers: USB2_PWR2 (For USB2.0 Port “USB2_0_1”), USB2_PWR3 (For USB2.0 Port “USB2_2_3”)

24. COM2/3/4/5/6 Pin#9 Power Setting Jumper: PWR_COM2, PWR_COM3, PWR_COM4, PWR_COM5, PWR_COM6 25. COM2, COM3, COM4, COM5, COM6 Headers (RS232 ONLY): COM2, COM3, COM4, COM5, COM6 26. LPT Port Header: LPT1 28. 3W Audio AMP Output: SPEAKER1 (Corresponding Volume Control available at BIOS) 29. Front Panel Audio Header: HD_AUDIO1

After removing the processor cover during processor installation, please save the processor socket cover. In the event that the desktop board needs to be returned for service or any time the processor is removed, the cover should be replaced on the processor socket. • Do not Touch Socket Contact