Barco X8 Installation Manual

President Kennedypark 35, B-8500 Kortrijk Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Belgium

ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice. This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication. The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the secured Barco web site https://my.barco.com. Copyright © All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Trademarks Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers. Disposal Information Waste Electrical and Electronic Equipment This symbol on the product indicates that, under the European Directive 2002/96/EC governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee Federal Communications Commission (FCC Statement) This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible for correcting any interference at his own expense EN55022/CISPR22 Class A ITE (Information Technology Equipment) Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use: Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Guarantee and Compensation Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints. The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not

system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either. The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by the customer.

TABLE OF CONTENTS 1. Safety................................................................................................................. 3 1.1 Safety guidelines ..................................................................................................................... 4 1.2 Important safety instructions ......................................................................................................... 5 1.3 Important warnings ................................................................................................................... 6 1.4 Proper usage ......................................................................................................................... 8 1.5 Important warnings concerning flight cases ......................................................................................... 9 2. Installation requirements ........................................................................................ 11 2.1 Mechanical requirements for the X8 rental display................................................................................. 12 2.2 Electrical requirements for the X8 rental display ................................................................................... 13 2.3 System requirements for the Director toolset....................................................................................... 14 3. System overview ..................................................................................................15 3.1 Introduction .......................................................................................................................... 16 4. Components of a X8 Rental Tile ................................................................................17 4.1 X8 Rental Frame .................................................................................................................... 18 4.2 X8 Module ........................................................................................................................... 19 4.3 X8 Connection Box ................................................................................................................. 21 5. X8 rental peripherals and accessories ........................................................................23 5.1 X8 rental base stand setup accessories ............................................................................................ 24 5.2 X8 rental truss setup accessories................................................................................................... 25 5.3 X8 rental flight cases ................................................................................................................ 26 5.4 DX-700 digitizer...................................................................................................................... 27 5.5 Power boxes ......................................................................................................................... 28 5.6 Control software ..................................................................................................................... 29 5.7 Fiberlink system ..................................................................................................................... 30 6. Setup process of a X8 rental display ..........................................................................31 6.1 Set up a floor mount X8 rental display .............................................................................................. 32 6.2 Set up a hanging X8 rental display ................................................................................................. 35 7. Basic setup procedures..........................................................................................39 7.1 Installing an adjustable foot ......................................................................................................... 40 7.2 Installing the X8 rental feet .......................................................................................................... 41 7.3 Installing the X8 rental tile upon the X8 rental foot ................................................................................. 43 7.4 Installing the X8 rental tile ........................................................................................................... 45 7.5 Installing the X8 stacker system .................................................................................................... 47 7.6 Installing the X8 truss beam......................................................................................................... 49 8. Cabling of the X8 display ........................................................................................53 8.1 Power cabling of the X8 display..................................................................................................... 54 8.2 Data cabling of the X8 display ...................................................................................................... 56 8.3 Interconnection between X8 Connection Box and X8 Modules.................................................................... 57 9. Maintenance........................................................................................................59 9.1 Cleaning the X8 display ............................................................................................................. 60 10. Servicing............................................................................................................61 10.1 Safety instructions ................................................................................................................... 62 10.2 X8 Connection Box diagnostic ...................................................................................................... 63 10.3 Replacing the X8 Connection Box .................................................................................................. 64 10.4 Replacing a X8 module.............................................................................................................. 67 10.5 Updates .............................................................................................................................. 68 A. Dimensions ..........................................................................................................69 A.1 Dimensions of the X8 Module....................................................................................................... 70 A.2 Dimensions of the X8 Connection Box ............................................................................................. 71 A.3 Dimensions of the X8 Rental Frame ................................................................................................ 72 A.4 Dimensions of the X8 Single Truss Beam .......................................................................................... 73 A.5 Dimensions of the X8 Dual Truss Beam ............................................................................................ 74 A.6 Dimensions of the X8 Rental Foot + Stacker ....................................................................................... 75 A.7 Dimensions of the X8 Flight Case for Rental Tiles ................................................................................. 76 A.8 Dimensions of the foot beams ...................................................................................................... 77 B. Specifications .......................................................................................................79 B.1 Specifications of the X8 Rental Tile ................................................................................................. 80 B.2 Weight of individual parts of the X8 rental display.................................................................................. 81 C. Order info ............................................................................................................83 C.1 Spare part order info ................................................................................................................ 84 R5905160 X8 RENTAL DISPLAY 25/02/2013 1