Asko Professional WMC64P Operating Instructions Manual

We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world. To get the most from your new machine, we recommend that you read the operating instructions before using the machine. The operating instructions also include information on how you can help protect the environment. Operating Instructions Washing Machine ASKO Professional WMC64P

the first time 3 Transport protection 3 Packing material 3 Washer door 3 Language selection 3 Checking water hardness 4 Safety instructions 4 General 4 Installation 4 Overflow guard function 4 Transport/Winter storage 4 Recycling 5 Child safety 5 Keep an eye on children! 5 Child safety catch 6 Description of the washing machine 6 Detergent compartment 7 Advice and tips before washing 7 Sorting your laundry 7 Clothing 7 Laundry labels 7 Coloured cotton 7 Unbleached linen 7 Wool 7 Rayon fibres and synthetic fibres 7 Detergents 9 Washing 9 Sort your laundry. 9 Turn on the main power switch 9 Open the washer door and load the washing 9 Add detergent and fabric softener, as required 10 Select the program 13 Close the washer door and press the Start/Stop button 13 Once the program has finished 14 Settings 14 You can change the following settings: 14 Door opening 14 Language 14 Temperature 14 Child-safe 15 Care and cleaning 15 Cleaning the trap and the drainage pump 15 Cleaning the detergent compartment 15 Cleaning the outside of the machine 16 Cleaning the inside of the machine to avoid unpleasant smells 17 Rinse holes under the agitator 17 If you have hard water 18 Troubleshooting 18 The washer door will not open 18 The machine will not start 19 Error messages 20 Technical information 20 Technical data 20 Information for test institute 22 Transport protection 23 Installation 23 Positioning the washing machine 23 Adjusting the feet 23 Connection to water supply 23 Drainage connection 24 Electrical installation 25 Service 25 Before contacting the service division 28 Quick guide 2 Contents

installing the machine. See the "Transport protection" chapter. Packing material Sort waste materials in accordance with local guidelines. Washer door • The washer door will not open until the machine is connected to the electricity supply. • To open the door manually, see "The washer door will not open" in the "Troubleshooting" chapter. • The machine cannot be started when the door is open. • To open the washer door while a program is running, see "Close the door and press the Start/Stop button" in the "Washing" chapter. Language selection You will be prompted to select the display language when you have connected your machine and start it for the first time. Do as follows: Turn the program selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands. Press the Door opening button or Start/Stop to save and to move on to the clock and time display settings. Checking water hardness The quantity of detergent needed depends, amongst other things, on how hard the water is. See the detergent pack for details. Phone your local water company to check the water hardness in your area. NOTE! Each machine is tested before leaving the factory. A small amount of water may remain in the drain pump, though this does not affect quality or damage the machine. See Quick guide on the last page 3 Before using your machine for the first time

in a safe place. • Installation should be carried out by qualified ASKO technicians. • The machine should only be used for washing items as described in these instructions. It is not intended for dry cleaning. • Use only detergent intended for machine washing! • Remove any transport protection devices before using the machine. See the "Transport protection" chapter. • Repairs and maintenance must be carried out by a qualified professional. • Damaged mains cables must only be replaced by a qualified electrician. • The machine is not designed to be used by persons (even children) that are physically or mentally handicapped or lack experience and knowledge. Such persons must receive instruction in how to use the machine or be supervised by a person responsible for their safety. • Children must be watched to ensure they do not play with the machine. • In the enclosed plastic bag you will find a tool for opening the washer door in emergencies. Installation See the "Installation" chapter. Overflow guard function If the machine’s water level rises above the normal level, the overflow guard function begins to pump water out and shuts off the water intake. If the water level has not dropped within 60 seconds, the program is terminated. Transport/Winter storage If the machine is to be transported or stored in unheated premises where the temperature can fall below freezing, do as follows: • Empty the filter and the drainage pump. See the "Care and cleaning" chapter. • Shut off the water to the washing machine, loosen the supply hose to the intake valve and let the water run out from the valve and hose. • After emptying the pump, a small amount of water may remain in the machine. This does not affect quality or damage the machine. Recycling This machine is manufactured and labelled for recycling. In order to prevent injuries, the machine must be made unusable once the decision has been taken to dispose of it. Contact your local authority for information about where and how your machine can be recycled correctly. 4 Safety instructions

• Always close the door and start the programme immediately once you have added detergent. • The appliance is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the appliance. • Store detergent and fabric softener out of the reach of children! CAUTION! If this appliance is supplied from a cord extensions set or electrical portable outlet device, the cord extension ser or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Child safety catch Do as follows to open the settings menu: 1. Turn off the machine using the main power switch. 2. Press and hold the Door opening button and then press the main power switch. Then press the Door opening button 5 times within 10 seconds. 3. Select the setting you want to change by turning the program selector. 4. Press the Door opening button once. 5. Change and save the setting as described below. 6. Press Start/Stop to return to the program menu. You can activate the Child-safe start option to prevent children from starting the machine. 1. Turn the program selector and select "Child-safe On" or "Child-safe Off". 2. Press the Door opening button once to save the setting. You can temporarily deactivate Child-safe start by pressing Start/Stop and the Door open button at the same time. Child-safe start will be deactivated for 3 minutes. 5 Child safety

2. Detergent compartment 3. Program panel 4. Serial number plate (on inside of washer door) 5. Drainage pump cover 6. Drainage pump (behind cover) 7. Washer door Detergent compartment 1. Pre-wash 2. Main wash 3. Fabric softener 1 2 3 6 Description of the washing machine

washing. Sorting your laundry Sort items according to: • how soiled they are • colour • material Clothing 1. Do up zips and close Velcro straps so that they don’t harm fabrics. 2. New coloured items may contain excess dye and should therefore be washed separately the first few times. 3. Turn delicate items inside out. This reduces the risk of burling and fading. 4. Empty pockets and wash them inside out if possible. Laundry labels Look at the item's laundry label. The table below shows suitable wash programs for different materials and wash loads. Using modern washing machines and detergents, for example compact detergents, you can usually wash at lower temperatures. It is a good idea to use trial and error to find out what produces the best results. Coloured cotton Coloured cotton items with the washing instruction 60 °C should be washed at 60 °C for the first time in order to remove any excess dye. If you do not do so, there is a risk that the colour will run. Use detergent without bleach in order to preserve the colour of the fabric. Unbleached linen Unbleached linen fabrics should be washed at 60 °C, using detergent containing no bleach or optical whiteners. Heavily-soiled linen can occasionally be washed at higher temperatures, but not too often because the heat can destroy the linen’s shine and strength. Wool These fabrics are labelled either machine wash or hand wash. The Wool/hand wash, 30 °C program is at least as gentle as washing by hand. Rayon fibres and synthetic fibres Materials made of rayon fibres, such as viscose, and some synthetic fibres are very delicate and require much space so as not to crease. Only half fill the drum when washing and choose a spin speed of 800 rpm or lower. NOTE! Viscose and acetates are fragile when wet. Detergents Eco-labelled detergents are less harmful to the environment. Detergent overdosing does not give better washing results; it merely causes a greater impact on the environment; can also hinder the wash performance. Try to use less detergent, and increase only if you are not satisfied with the results. 7 Advice and tips before washing

the use of strong chemicals. When using agents for bleaching or stain removal, there is a risk of rust (corrosion) and discolouration of the machine. 8 Advice and tips before washing

See the "Advice and Tips before washing" section. Place underwired bras in a laundry net. Empty pockets. Coins, nails and the like can cause damage to the machine and fabrics. See the "Advice and Tips" section before washing. 2 Turn on the main power switch 3 Open the washer door and load the washing If the washer door is closed, press the Door opening button (key symbol). The door opens once all water has drained from the machine. Load the washing. The wash program chart shows how much washing can be washed with each program. 4 Add detergent and fabric softener, as required The detergent packaging will have recommendations for how much detergent you should use. The machine holds 7 kg of washing. If you only have a small amount of laundry in the machine, you can reduce the amount of detergent used. Powder detergent Pour the powder into the compartment for the main wash, and pre-wash as well if desired. Liquid detergent When using liquid detergent, follow the detergent manufacturer’s recommendations. We recommend always using a wash ball with very thick liquid detergent. Wash ball or net If you use a wash ball or net, place it directly in the drum and select a program without pre-wash. NOTE! Detergent overdosing does not give better washing results; it merely causes a greater impact on the environment; can also hinder the wash performance. Try using less detergent, and increase only if you are not satisfied with the results. Fabric softener Pour the fabric softener into the compartment with the symbol. Follow the recommendations on the fabric softener packaging. NOTE! Do not fill above the compartment’s maximum fill level. Otherwise fabric softener will run in too early, and will impair washing results. 9 Washing

Start/Stop Spin Program name Door opening Time remaining Temperature The display shows the program name, the water temperature and the spin speed. The washing machine has a number of preselected programs when delivered from the factory. The preselected programs can be replaced. Contact the service division for information on which programs are available and how to alter the preselected programs. Normal Wash, 60 °C Program for normal to heavily soiled laundry, whites and colours. Follow the washing instructions for each garment. 60 °C is a good temperature for garments worn next to the skin. This program has five rinses. Normal wash, 40 °C Program for normal to heavily soiled laundry, whites and colours. Follow the washing instructions for each garment. This program has five rinses. Heavy wash, 90 °C Program for heavily soiled laundry, with dirt that needs to be fully dissolved before the main wash. A pre-wash is used to do this. Heavy wash, 60 °C Program for heavily soiled laundry, with dirt that needs to be fully dissolved before the main wash. A pre-wash is used to do this. White, 90 °C Program for normal to heavily soiled laundry. Follow the washing instructions for each garment. 90 °C is a good temperature for white and light-coloured cotton, such as bed linen. White/Colour, 60 °C Program for normal soiled laundry, whites and colours. Follow the washing instructions for each garment. 60 °C is a good temperature for garments worn next to the skin. White/Colour, 40 °C Program for normal soiled laundry, whites and colours. Follow the washing instructions for each garment. Super quick wash, 60 °C Fast program for laundry that just needs freshening up. Follow the washing instructions for each garment. Garments worn next to the skin ought to be washed at 60 °C. Super quick wash, 40 °C Fast program for laundry that just needs freshening up. Follow the washing instructions for each garment. Synthetics, 40 °C Program for synthetics, delicate blended materials and permanent press cotton. Suitable for shirts and blouses. Follow the washing instructions for each garment. Many synthetics will come clean at 40 °C. 10 Washing

A gentle laundry program for wool, silk and garments that should be washed by hand. This program has a short spin. Rinse This program performs one cold rinse cycle + spin. Suitable for laundry that just needs to be dampened. MOP wash, 90 °C Program suitable for different types of mop. The program has two rinses using much water. MOP wash, 60 °C Program suitable for different types of mop. The program has two rinses using much water. Micro fibre wash, 60 °C Program for laundry made of microfibres, such as microfibre cloths. The program has three rinses with much water in the first rinse. Micro fibre wash, 40 °C Program for laundry made of microfibres, such as microfibre cloths. The program has three rinses with much water in the first rinse. Disinfection, 40 °C Program where the temperature reached during the main wash is maintained for 20 minutes. Disinfection at this temperature requires special detergent. Disinfection, 60 °C Program where the temperature reached during the main wash is maintained for 20 minutes. Disinfection at this temperature requires special detergent. Disinfection, 90 °C Program where the temperature reached during the main wash is maintained for 10 minutes. This temperature is sufficient for disinfection without special detergent. Program A No information available Program B No information available Program C No information available 11 Washing

min.) Energyconsump- tion (approx. kWh) Waterconsump- tion (approx. liter) Max. load ( kg) Spin Speed rpm Number Temp. °C of Rinses Pre- wash Program 3:05 1,20 77 7 1400 5 60 Normal Wash, 60 °C 2:55 0,70 77 7 1400 5 40 Normal wash, 40 °C 1:35 2,3 80 7 1400 3 90 X Heavy wash, 90 °C 1:15 1,1 70 7 1400 3 60 X Heavy wash, 60 °C 0:60 1,3 70 7 1400 3 90 White, 90 °C 0:50 0,3 65 7 1400 3 60 White/Colour, 60 °C 0:50 0,3 65 7 1400 3 40 White/Colour, 40 °C 0:30 0,6 45 3,5 800 3 60 Super quick wash, 60 °C 0:25 0,3 40 3,5 800 3 40 Super quick wash, 40 °C 0:25 0,3 45 3,5 800 3 40 Synthetics, 40 °C 0:30 0,3 60 2,3 800 3 30 Wool/hand wash, 30 °C 0:15 0,1 20 3,5 1400 1 Rinse 1:00 1,2 55 7 1400 2 90 X MOP wash, 90 °C 0:40 0,3 50 7 1400 2 90 X MOP wash, 60 °C 0:50 0,3 55 7 1400 3 60 Micro fibre wash, 60 °C 0:50 0,3 55 7 1400 3 40 Micro fibre wash, 40 °C 1:15 0,7 75 7 1400 3 40 X Disinfection, 40 °C 1:25 1,5 75 7 1400 3 60 X Disinfection, 60 °C 1:45 2,6 85 7 1400 3 90 X Disinfection, 90 °C Program A Program B Program C Consumption data may vary from the given values depending on variations in water pressure, water hardness, water inlet temperature, room temperature, fluctuations in the electricity, type and volume of the laundry and any extra options. 12 Washing

press the Start/Stop button Time remaining 'Program started' is shown on the display. To add or remove washing after the program starts If you want to add or remove items after the program has started, you can stop the program by pressing and holding the Door opening button (key symbol) for three seconds. When you restart the machine, add any extra detergent needed and close the washer door. The machine continues automatically from the point where the program was interrupted. Stopping or changing a program You can stop a program by pressing the Start/Stop button for three seconds. "Stop" appears in the display. To restart the machine, select a new program, add any extra detergent needed and press the Start/Stop button. NOTE! Do not open the detergent compartment while the machine is running. 7 Once the program has finished Once a program has finished, "Done" appears on the display. The washer door opens automatically once the program has finished. If you want to deactivate the automatic door opening function, see the "Selecting settings" section. • Remove the load. • Turn off the main power switch, this will save energy. If you have small children or pets at home, close the washer door once you have removed the laundry. Backlighting Two minutes after the wash program finishes the display backlighting enters energy saving mode. 13 Washing

• Language • Child-safe • Door opening • Temperature °C/°F Do as follows to open the settings menu: 1. Turn off the machine using the main power switch. 2. Press and hold the Door opening button and then press the main power switch. Then press the Door opening button 5 times within 10 seconds. 3. Select the setting you want to change by turning the program selector. 4. Press the Door opening button once. 5. Change and save the setting as described below. 6. Press Start/Stop to return to the program menu. Door opening If you do not want the washer door to open automatically when the program is finished you can deactivate this function. 1. Turn the program selector, choose "Door opening On" or "Door opening Off". 2. Press the Door opening button once to save the setting. Language 1. Turn the program selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands. 2. Press the Door opening button once to save the setting. Temperature 1. Turn the program selector to choose between: °C and °F. 2. Press the Door opening button once to save the setting. Child-safe You can activate the Child-safe start option to prevent children from starting the machine. 1. Turn the program selector and select "Child-safe On" or "Child-safe Off". 2. Press the Door opening button once to save the setting. You can temporarily deactivate Child-safe start by pressing Start/Stop and the Door open button at the same time. Child-safe start will be deactivated for 3 minutes. 14 Settings

pump The washing machine has a trap where smaller objects such as coins and hairpins can collect. To clean the trap and the drainage pump, do as follows: 1. Make sure the machine is empty of water and switched off at the mains. 2. Open the door. 3. Unhook the drainage hose from the connector inside the door and drain the water into a suitable container, such as a shallow bowl. 4. Turn the cover anti-clockwise to open the pump. Remove the cover. 5. Remove any items and so forth from the pump housing and the cover. Also check that the pump blades right at the back rotate. 6. Screw on the cover, replace the drainage hose on the hatch pin and close the hatch. Cleaning the detergent compartment NOTE! Do not run the detergent compartment through a dishwasher! Pull the detergent compartment out as far as it will go. Lift the detergent compartment as you pull it out to remove it from the machine. Rinse the compartment and scrub it clean. The fabric softener compartment cover can be removed. Cleaning the outside of the machine Clean the outside of the machine and the program panel with a mild cleaner. Do not use any solvents, as these can damage the machine. NOTE! Do not hose down the machine with water! 15 Care and cleaning

to avoid unpleasant smells Modern detergents often allow clothes to be washed at low temperatures. This means that small deposits can build up in the machine. These, in turn, may lead to unpleasant smells developing; especially if constantly using cold wash. To avoid this, we recommend running a 95 °C wash program once a month. When you do this, use a small quantity of detergent. It is not necessary to put any washing in the machine. 16 Care and cleaning

If you suspect that objects such as nails or paper clips may have fallen into the wash drum, you should check the space under the agitator. Such objects can rust and cause spots on clothing. Nails and other sharp objects can cause holes in fabrics. Do as follows: 1. Insert a screwdriver or the like into the hole on the agitator as illustrated and carefully pry to the left. 2. Use your other hand to grasp the agitator and pull it towards you. 3. Lift the agitator. 4. Remove any objects. 5. Place the agitator in the mounting hole with the F-mark towards you. Ensure that all the agitator fasteners are in their holes in the drum. Push it in until it catches. If you have hard water If you live in an area with hard water (high limescale content), a greyish-white coating may form on the wash drum. To remove this coating, pour approximately 20 gram of citric acid into the wash drum and run any 95 °C program. Repeat if necessary. 17 Care and cleaning

1. Check that the main power switch is on. 2. Is there power? Check your home’s fuses (circuit breakers). The washer door cannot be opened with the Door opening button (with the key symbol) if power is off. If nothing else works, the washer door can be opened as follows: WARNING! The door may only be opened manually if the electric power is cut and the machine has been drained of water. A First empty the water from the washing machine. Press and hold the Door opening button for three seconds to pump out the water. If this does not work the machine must be drained manually. See "Cleaning the trap and the drainage pump" in the "Care and cleaning" chapter. B Ensure that the main power switch is turned off and that the plug has been removed from the wall socket. C Take the emergency door opening tool and place it in the gap on the right side of the washer door lock. This tool is found in the enclosed plastic bag. D Push the tool upwards to open the washer door. If in the future the washer door does not open when the wash program has finished, call the service division. The machine will not start 1. Is the washer door properly closed? Push it firmly. 2. Is there power? Check the fuses and residual current devices (circuit breakers) in the building. 18 Troubleshooting

is shown on the display. To exit the message after taking measures, turn the machine off and then back on. The error messages that may be shown in the display are: Close the door Close the washer door and the program will start. Over flow fault 1. Shut off the water tap. 2. See "Water outlet fault". Water outlet fault Check: • that no objects are stuck in the drainage hose outlet. • that the drainage pump is not blocked by foreign objects. Clean the pump. See the "Care and cleaning" chapter. • that there are no kinks in the drainage hose. Press the Door opening button (key symbol) to empty the machine of water before opening the washer door. If this does not resolve the problem, call the service division. Water inlet fault Check: • that the tap on the water pipe is open. • that the filter in the machine’s water inlet is not blocked. Action: 1. Shut off the water tap. 2. Unscrew the hose. 3. Clean the filter in the inlet valve on the machine. 4. Screw the hose back on. 5. Turn on the tap and check for leaks. 6. Run the program again to check if the fault is fixed. 7. If this does not resolve the problem, call the service division. Security fault Call the service division! Wash motor fault Call the service division! Unbalance The machine stops the spin cycle if there is too much imbalance. The washing machine restarts the spin cycle and hopefully the washing is better distributed in the drum. This procedure can be repeated up to 10 times. If the machine still fails to find a good balance, the program jumps to the next step. The error message requires no action. 19 Troubleshooting

400-1400 Spin speed (rpm): See type plate. Rated power: See type plate. Heater output: 0,1-1 MPa 1-10 kp/cm 2 10-100 N/cm 2 Water pressure: Stainless steel Wash drum and liquid compartment material: Powder-coated and hot-galvanized sheet steel or stainless steel. Outer casing material: 1,5 m pex pipe Water connection: 1,7 m polypropylene hose Drain: Information for test institute Energy declaration AS/NZS 2040.1:1998 Australian standard: Normal, 40 °C, 7 kg cotton Washing program: Cold water 20 °C Connection: IEC-60704-2-4 Test method for noise measurement: < 0,3 W Power requirement when machine turned off < 6,0 W Power requirement for Delayed Start < 3,0 W Power requirement when program finished Detergent, PBIS and Anti-Sudsing Agent (10ml) must be added via the detergent compartment. 20 Technical information

When loading the machine for testing according to AS/NZS 2040:2005 it shall be loaded according to the table below. Garments are placed on top of each other in layers and the soil swatches should be placed inside the wash drum in the direction shown in the table, seen from above. Illustration of loaded Wash Drum for standard test. Swatch place- ment Swatch- es Top Left 1 30. Bath towel Right 1 29. Pillow case Front 1 28. Pillow case 27. Undershorts Rear 1 26. T-shirt Right 1 25. Tablecloth 24. Bath towel Front 1 23. Shirt Center 1 22. Undershorts 21. Undershorts Left 1 20. Sheet 19. Wash cloths (all) 18. T-shirt Center 1 17. T-shirt Right 1 16. Undershorts Rear 2 15. Shirt 14. Bath towel Left 1 13. Bath towel 12. Handkerchiefs (all) Right 1 11. Sheet 10. Undershorts Center 1 9. Undershorts Rear 1 8. Shirt 7. Bath towel Left 1 6. Tablecloth Front 1 5. T-shirt 4. Undershorts 3. Pillow case Left 1 2. Pillow case Right 1 1. Bath towel 20 Total 21 Technical information

plugs for locking the machine for transport before using the machine. 1. Loosen and remove the bolts as illustrated below. 2. To remove the plastic plugs that held the bolts, squeeze together and pull out. 3. Remove the plastic covers from the plugs. Push the plastic covers into the three holes that contained the plugs. Save the plastic plugs in case the machine is moved in the future. NOTE! If the machine is to be transported, the bolts and plastic plugs for locking the machine during transport must be installed to prevent damage to the machine through shaking. If the transport bolts or plastic plugs have been lost, you can order new ones from your retailer. Designation Article number Screw 80 882 77 Plastic plug, transport lock 80 901 05 Order three of each item! 22 Transport protection

The washing machine can be installed as a built-in or freestanding unit. Position the machine so that the electrical plug is easily accessible. A. Built-in The washing machine can be installed under a counter top with a working height of 850–900 mm. Leave a 5 mm space around the entire machine, including between the rear edge of the top cover and the wall behind it. B. Freestanding The washing machine can be positioned beside or under a tumble dryer. Adjusting the feet Keep the noise that the machine produces to a minimum by adjusting the feet so that the machine is steady and balanced on the floor. Tighten the lock nuts. Locking nut Connection to water supply Water connection should be carried out by an appropriately qualified person. Connect the machine using the accompanying supply hose. Water pressure should be 0.1–1MPa (approx. 1–10kp/cm 2; 10–100N/cm 2). There should be a stopcock on the water pipe. If the pipes are newly installed, it may be wise to flush them through so that any dirt is washed away. Otherwise, dirt can clog the filter in the machine’s water intake and cut off cut off or reduce water flow to the machine. Check for leaks. Use only the supply hose supplied with the machine. Do not re-use old hoses or other loose supply hoses. Water intake At the factory, the machine is set for connecting to both hot and cold water supplies. The machine can be set for a cold water supply only. This setting must be changed by a qualified professional. Contact the Service Division. Drainage connection The machine is supplied with a drainage hose attached, which must be connected to a drain. See the examples below. The height must be 600–900 mm above floor level. The lower position (600 mm) is always preferable. Ensure that the drainage hose has no kinks. 600-900mm The machine can also be connected to the drain via a spigot connection. In this case the hose should also be 600-900 mm above the floor. The 23 Installation

mm. • Cut the nipple • Remove burrs from the hole. See the illustration. At least 18 mm Electrical installation If the machine is delivered from the factory with a plug attached, it can be connected to an earthed wall socket. Otherwise, a permanent connection using a multipolar circuit breaker must be made by a qualified professional. CAUTION! If this appliance is supplied from a cord extensions set or electrical portable outlet device, the cord extension ser or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Connection on delivery The machine is supplied as 1-Phase, 230 V, 50 Hz, heat output 3000 W and has a 16 A plug. Any residual current devices must be type A. NOTE! Repairs and maintenance must be carried out by a qualified professional. Coin operation The machine is prepared for coin operation. Such installation must be carried out by a qualified professional. The installation requires a connection cable to power the coin meter. This connection cable can be ordered as an accessory using the factory art. no. 92 090 95. The coin meter must be able to short circuit two signal lines for periods of up to 10 minutes. This is to give the user time to load the machine, choose a program and start the program after inserting the coins. 'Insert coin' appears on the display when the machine is started with the main power switch. 24 Installation

division Before you contact the service division, make sure that you know the model number (located on the front panel), and serial number. The model designation can be found on the panel. The type designation and serial number can be found on the type plate on the inside of the washer door. 2 Type Serial number (12 digits) 70.C Model Number Serial Number 25 Service

2. Read the item’s laundry label. 3. Sorting laundry. NOTE! Place underwired bras in a laundry net. 2 Load the laundry 1. Press the main power switch. 2. If the washer door is closed, press the Door opening button (key symbol) and the door will open. 3. Load the washing and close the washer door. 3 Detergent compartment 1. Pour detergent into the main wash compartment, and pre-wash compartment as well if required. Pour fabric softener into the compartment on the right with the -symbol. 2. If you use liquid detergent, follow the detergent manufacturer’s recommendations. 4 Select the program 1. Select a program by turning the program selector. 2. Press the Start/Stop button. 5 Program finished 1. "Done" on the display indicates that the wash program has finished. 2. The washer door opens automatically once the program has finished. 3. Remove the load. 4. Turn off the main power switch. If you have small children or pets at home, close the washer door once you have removed the laundry. Art. No.: 8091832. Rev. 01. We reserve the right to make changes. Printed on environmentally friendly paper that meets the requirements of Miljöförbundet and Naturskyddsföreningen. 28 Quick guide