Balluff BVS HS-PB Manual 

Balluff GmbH Schurwaldstraße 9 73765 Neuhausen a.d.F Service-Hotline +49 7158 173-370 [email protected] Subsidaries USA Balluff Inc. 8125 Holton Drive Florence, Kentucky 41042-0937 Phone (859) 727-2200, 1-800-543-8390 [email protected] Copyright Notice Copyright © Balluff GmbH, Neuhausen a.d.F., Germany, 2015. All rights reserved. In particular: Reproduction, modification, dissemination and translation into other languages. Please note that all texts, graphics and images in this operating manual are sub- ject to copyright and other protection laws. Commercial copies, reproductions, modifications and dissemination in any form require prior written agreement from Balluff GmbH. Owners of Balluff products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this docu mentation and shall ensure that all notices appear on any reproductions of the documentation. An electronic version of this document is downloadable from the Balluff website (www.Balluff.com). If you visit our website and would like to make comments or suggestions about this or other Balluff publications, please let us know via the "Contact" page. Disclaimer This document contains operating instructions and technical documentation for BVS HS Handscanners by Balluff GmbH. All specifications and instructions in this document, especially the Safety Notes section, must be strictly observed. This operator’s manual must be carefully stored so that it is always available. The information and illustrations in this operating manual were carefully checked to the best of our ability. Nevertheless, Balluff GmbH cannot assume any liability for the correctness and completeness of this information, since in spite of all due care errors and mistakes cannot be completely avoided. In particular this information and the illustrations do not constitute agreements as to condition according to § 434 of the German Civil Code or guarantees according to § 443 of the GCC. The information in this manual is based on current knowledge and experience of Balluff GmbH. No legally binding assurance of certain properties or suitability for a specific pur- pose can be derived from the information in this operating manual. Trademarks The product, goods, company and technology names are trademarks of the respective companies. In particular: Microsoft®, Windows®, Windows XP®, .NET FRAMEWORK ® and Windows 7® are registered trademarks of Microsoft Corporation ; QR Code (R) is a registered trademark of Denso Wave Incorpo- rated. Balluff and Balluff Logo are registered trademarks of Balluff GmbH in many countries.It is the user’s responsibility to observe any property rights and provisions. Patents This product is covered by one or more of the following patents: Design patents: AU344427, AU344428, AU344429, EP001970237, EP002109371, TWD159476, TWD159477, TWD160254, TWD160255, USD682277, USD702238, ZL201230284676.X, ZL201330082835.2 Utility patents: EP0996284B1, EP0999514B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1828957B1, EP1873886B1, JP4435343B2, US6478224, US6512218, US6513714, US6561427, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US7721966, US7948214, US8245926, US8561906, US8743263, ZL200780030808.2 All patents belong to a third party!

Industrial Cordless Handheld Barcode Reader END USER SOFTWARE LICENSE AGREEMENT (EULA)................4 Description........................................................................................8 General Features ............................................................ 8 Using the Balluff BVS HS-PB reader ...............................................9 Installing the Battery Pack .............................................................10 Charging the Batteries .................................................. 12 Changing the Batteries ........................................ 13 Programming ..................................................................................14 Using Programming Barcodes ...................................... 14 Configure Other Settings .............................................. 14 Resetting Product Defaults ........................................... 14 Set Date and Time ..........................................................................15 Linking the Reader..........................................................................16 Link Balluff RF Devices to Base .................................... 16 Linking to a Bluetooth Adapter in Serial Port Profile (Slave) Mode ................................. 16 Linking to a Bluetooth Adapter in HID mode ................. 17 Variable PIN Code ........................................................ 18 HID Country Mode..........................................................................19 HID Caps Lock State ......................................................................23 HID Alt Mode...................................................................................24 Power Off ........................................................................................25 Reading Parameters.......................................................................26 Good Read Green Spot Duration ................................. 26 Operating Modes............................................................................27 Scan Mode .................................................................. 27 Motion Aiming Control .................................................. 28 Pick Mode .................................................................... 29 Multiple Label Reading ................................................. 29 Technical Specifications ................................................................30 LED and Beeper Indications ..........................................................34 Error Codes.....................................................................................37 Regulatory Addendum....................................................................38 Regulatory Information ................................................. 40 WEEE Statement .......................................................... 45 Imager Labeling ............................................................ 46 Aiming System .................................................... 46 Letter of Conformity ...................................................... 50 Cleaning ..........................................................................................51 Ergonomic Recommendations.......................................................52 Services and Support ................................................... 52 Hex-Numeric Keypad .....................................................................53 For HID Variable Pin Code only ..................................... 55

4 BVS HS-PB Industrial Cordless Handheld Barcode Reader BALLUFF GMBH 1 END USER SOFTWARE LICENSE AGREEMENT (EULA) FOR THE BVS HS-P Series Notice to End User: There are two types of software covered by this END USER LICENSE AGREEMENT ("EULA"): (1) The Balluff Product you have acquired contains embedded software ("Embedded Software") which is inte- gral to the Product's operation; and (2) Optional Application Software pro- vided to you on an optional basis ("Application Software"). Embedded Software and Application Software are collectively referred to as "Software" and are subject to the terms and conditions contained in this EULA. Software is provided only for use with, and for authorized end users of, the Balluff BVS HS-P Series of hand held readers ("Product"). Portions of the Embedded Software include or operate with Open Source software or libraries ("Open Source"). Use of Open Source is subject to the Open Source licenses entitled " BVS_HS-PReaders_OpenSource.zip " available at the following website http://www.balluff.com. This EULA (End User Software License Agreement) ("EULA" or "Agreement") is a legally binding agreement governing the licensing of the Software and Documenta- tion by Balluff GbmH. and its subsidiaries and affiliates ("Balluff") to the entity or per- son who has purchased or otherwise acquired a Balluff Product ("End User"). For purposes of this Agreement, any software that is not Embedded Software or Appli- cation Software is software associated with a separate end-user license agreement is licensed to you under the terms of that license agreement. Balluff and End User hereby agree as follows: 1. Definitions. 1.1 "Affiliate" means a business entity currently existing or later acquired that is controlled by, or is under common control with Balluff GmbH. 1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the Balluff Product, whether in printed, "online", or other form. 1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base design, algorithms, technology, technical data or information, implementa- tion techniques, and trade secrets related to the Software, (b) any other trade secrets marked appropriately or identified as proprietary or confiden- tial, and (c) any information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any infor- mation that the receiving party can establish was (1) in the public domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or (4) independently developed without access to Propri- etary Information. 1.4 "Balluff Product" means the Balluff BVS HS-P series scanner product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End User, whether obtained directly or indirectly from Balluff. 1.5 "Software" means any software or computer programs of Balluff or its third party licensors in machine readable form which is embedded in the Balluff Product, whether obtained directly or indirectly from Balluff, including any replacement, update, upgrade, enhancement or modification. 2. Scope Of License Granted. 2.1 Balluff grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Balluff Product in which it is embedded ("designated Balluff Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User. Title to the Software shall be and remain with Balluff or the third party from whom Balluff has obtained a licensed right. As used in this Agreement, the term "purchase" or its equiva- lents when applied to the Software shall mean "acquire under license." End User is not entitled to receipt or use of the source code to any Software. 2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or oth- erwise transfer the Software to any other person or organization, for pur- poses other than as expressly provided in this Agreement, without Balluff's prior written consent.

www.balluff.com 1 END USER SOFTWARE LICENSE AGREEMENT (EULA) 5 3. Transfers, Support. 3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated Balluff Product will be a material breach of this Agreement. However, Balluff may elect not to terminate this Agreement or the granted licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User shall pay Balluff the applicable list price for such licenses as of the date of such breach. 3.2 End User may obtain support for Software from Balluff at Balluff's standard support fees and under Balluff's standard support terms and conditions in effect at the time the support is requested. 3.3 End User shall make at its own cost and liability a back up copy of any data processed and/or run through the Software. 4. Intellectual Property. End User acknowledges that the Software constitutes valuable trade secrets of Balluff or Balluff's third party licensors and that the Software is protected by intel- lectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Balluff's or its third party licensors' copy- rights, patents, trademarks, service marks, trade secrets, or other intellectual prop- erty rights and End User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Balluff Product. 5. Proprietary Information. 5.1 End User acknowledges that Proprietary Information is the confidential, pro- prietary, and trade secret property of Balluff and Balluff's third party licensors and End User acquires no right or interest in any Proprietary Information. 5.2 End User shall not disclose, provide, or otherwise make available the Propri- etary Information of Balluff or its third party licensors to any person other than End User's authorized employees or agents who are under confidenti- ality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Balluff Product exclusively for End User's internal business purposes. End User shall take steps to protect the Propri- etary Information no less securely than if it were End User's own intellectual property. 5.3 The provisions of this Proprietary Information Section shall survive and con- tinue for five (5) years after the termination of this Agreement. 6. Limited Warranty. 6.1 Balluff warrants that, under normal use and operation, the Balluff Product will conform substantially to the applicable Documentation for the period speci- fied in the Documentation. During this period, for all reproducible non- con- formities for which Balluff has been given written notice, Balluff will use commercially reasonable efforts to remedy nonconformities verified by Bal- luff. End User agrees to supply Balluff with all reasonably requested informa- tion and assistance necessary to help Balluff in remedying such nonconformities. For all defects reported to Balluff within the warranty period, Balluff's liability is limited to providing End User with one copy of cor- rections or responding to End User's problem reports according to Balluff's standard assistance practices. Balluff does not warrant that the product will meet End User's requirements or that use of the product will be uninter- rupted or error free, or that Balluff's remedial efforts will correct any noncon- formance. This limited warranty does not cover any product that have been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement. 6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE BALLUFF PRODUCT IS PROVIDED "AS IS" AND BALLUFF MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRAN- TIES OF MERCHANT- ABILITY AND FITNESS FOR A PARTICULAR PUR- POSE.

6 BVS HS-PB Industrial Cordless Handheld Barcode Reader 7. Infringement. 7.1 Balluff will defend End User against any claim in a lawsuit that the Balluff Product furnished hereunder infringe a United States patent or copyright of a third party and Balluff will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or will pay End User's part of any settlement that is attributable to such claim, pro- vided, that 1) End User notifies Balluff promptly in writing of the claim, 2) Bal- luff controls the defense or settlement of the claim, and 3) End User cooperates fully with Balluff in such defense or settlement. All notices of a claim should be sent to Balluff GbmH Schurwaldstraße 9, D-73765 Neuhau- sen/Fildern, Germany. In the defense or settlement of any such claim, Balluff may, at its option, 1) procure for End User the right to continue using the Balluff Product, 2) modify the Balluff Product so that it becomes non-infring- ing, 3) replace the Balluff Product with an equivalent product not subject to such claim, or 4) provide End User an opportunity to return the Balluff Prod- uct and receive a refund of the purchase price paid, less a reasonable allow- ance for use. 7.2 Balluff shall have no liability to End User for claims of infringement based upon 1) the use of any Balluff Product in combination with any product which Balluff has not either furnished or authorized for use with such Prod- uct 2) the use of any Balluff Product designed, manufactured, or modified to the specifications of End User, or 3) End User's modification of the Balluff Product without written authorization from Balluff. 7.3 THE FOREGOING STATES BALLUFF'S COMPLETE AND ENTIRE OBLIGA- TION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPER- CEDES ANY PRIOR AGREE- MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON- TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES. 8. Limitation Of Liability. IN NO EVENT SHALL BALLUFF'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIA- BILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, WILL INCLUDE LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAM- AGES, EVEN IF BALLUFF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BALLUFF SHALL BE LIABLE FOR THOSE DAMAGES WHICH OCCURRED DIRECTLY FROM ANY BREACH OF CONSTITUIONAL OBLIGA- TIONS OF THIS AGREEMENT AND WHICH HAVE CAUSED ACTUAL FINANCIAL LOSS AS OF THEIR OCCURRENCE. 9. Government Restricted Rights; International Use. 9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable. 9.2 End User must comply with the applicable local laws of the country in which the Balluff Product is used, with U.S. export control laws, and with this Agreement. The provisions of the "United Nations Convention on Interna- tional Sale of Goods" shall not apply to this Agreement. 10. Termination. 10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement. 10.2 Upon termination of this Agreement, End User immediately shall cease using any nonembedded software and shall return to Balluff or destroy all non- embedded software covered by this Agreement, and shall furnish Balluff with a certificate of compliance with this provision signed by an officer orautho- rized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Balluff concerning further use of the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such use.

www.balluff.com 1 END USER SOFTWARE LICENSE AGREEMENT (EULA) 7 11. General Provisions. 11.1 Entire Agreement; Amendment. This document contains the entire agree- ment between the parties relating to the licensing of the Software and super- sedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Balluff.. 11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt. Notices to Balluff shall be sent to the attention of Contract Adminis- tration, Balluff GmbH Schurwaldstraße 9, D-73765 Neuhausen/Fildern, Germany, or such other address as may be specified by Balluff in writing. 11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions 11.4 It is agreed that (a) place of jurisdiction for legal actions falling within the juris- diction as regards the subject matter of the Amtsgericht (local courts) shall be the Amtsgericht Stuttgart, Germany and (b) place of jurisdiction for legal actions falling within the jurisdiction as regards the subject matter of the Landgericht (regional courts) shall be the Landgericht Stuttgart, Germany. 11.5 German law shall apply exclusively without giving effect to its conflict of laws principles. 11.6 In addition to these EULA, the General Terms and Conditions of Balluff shall apply. In the event that individual provisions of the EULA contradict any pro- vision of General Terms and Conditions, then, the EULA shall prevail. With- out prejudice of the foregoing, should a clause of the EULA contradict the applicable law, then, to the extent the General Terms and Conditions have most favorable provision for Balluff in this respect, then the Parties shall refer to the General Terms and Conditions of Balluff. - END - Software Product Policy Balluff reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Balluff software technology.

2 Description The Balluff BVS HS-PB reader is a feature-rich and rugged area imager. It is offered in several different models to better fit the different needs of each customer. The table below shows the unique features of each model: 2.1 General Features Model P/N Optical feature BVS HS-PB- HDW-MZ-01 Autofocus optic, High, standard and low density codes, wide angle BVS HS-PB- DPW-MZ-01 High Density optic, high and medium density codes, DPM (laser, ink jet and dot peen) Omni-directional Operating To read a symbol or capture an image, you sim- ply aim the reader and pull the trigger. Since the Balluff BVS HS-PB reader is a powerful omni- directional reader, the orientation of the symbol is not important. Decoding Thanks to powerful algorithms, Balluff BVS HS-PT reader reliably decodes all major 1D (linear) barcodes, 2D stacked codes (such as PDF417), 2D matrix symbols (such as DataMa- trix), postal codes (such as POSTNET, PLANET). The data stream — acquired from decoding a symbol — is rapidly sent to the host. The reader is immediately available to read another symbol. Formatting and Concatenating The string of a decoded code may be processed according to either a simple or advanced data formatting and be concatenated. Imaging Balluff BVS HS-PB reader can also function as a camera by capturing entire images (valid only for RS-232 and USB-COM on the Base Station). Autoscanning An autoscan command causes the reader to scan continuously and to monitor the central zone of its reading area. Flash Memory Flash technology allows you to upgrade the Bal- luff BVS HS-PB reader as new symbologies are supported or as new features become available.

www.balluff.com 3 Using the Balluff BVS HS-PB reader 9 3 Using the Balluff BVS HS-PB reader The Balluff BVS HS-PB reader normally functions by capturing and decoding barcodes. The reader is equipped with an internal motion- sensing function which activates the aiming system on device motion. The intelligent aiming system indicates the field of view which should be positioned over the barcode: Aiming System The field of view indicated by the aiming system will be smaller when the reader is closer to the barcode and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars or elements (mil size) should be read farther from the unit. If the entire barcode is within the aiming field, you will get a good read. Successful reading is signaled by an audible tone plus a good-read green spot LED indicator which is backprojected at the read code. Reference the BVS HS-P series operation manual (OPM) for more infor- mation about this feature and other programmable settings. Model P/N Aimer pattern BVS HS-PB-DPW-MZ-04 BVS HS-PB-HDW-MZ-03

10 BVS HS-PB Industrial Cordless Handheld Barcode Reader 4 Installing the Battery Pack To install, charge and/or do any other action on the battery, follow the instructions in this manual. NOTE To charge the Battery Pack, See “Charging the Batteries” on page 12. Balluff recommends annual replacement of rechargeable battery packs to ensure maximum performance. WARNING Do not discharge the battery using any device except for the scanner. When the battery is used in devices other than the designated product, it may damage the battery or reduce its life expec- tancy. If the device causes an abnormal current to flow, it may cause the battery to become hot, explode or ignite and cause serious injury. Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if exposed to abusive conditions. Be sure to follow the safety warnings that follow: • Do not place the battery pack in fire or heat. • Do not connect the positive terminal and negative terminal of the battery pack to each other with any metal object (such as wire). • Do not carry or store the battery pack together with metal objects. WARNING • Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks. • Do not solder directly onto the battery pack. • Do not expose the battery pack to liquids, or allow the battery to get wet. • Do not apply voltages to the battery pack con- tacts. In the event the battery pack leaks and the fluid gets into your eye, do not rub the eye. Rinse well with water and immediately seek medical care. If left untreated, the battery fluid could cause damage to the eye.

www.balluff.com 4 Installing the Battery Pack 11 As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity over time. Capacity deterioration is noticeable after one year of service whether the battery is in use or not. It is difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at 500 charge cycles. In other words, the batteries should be expected to take 500 full discharge / charge cycles before needing replacement. This number is higher if partial discharging / recharging is adhered to rather than full / deep discharging. The typical manufacturer advertised useful life of LI batteries is one to three years, depending on usage and number of charges, etc., after which they should be removed from service, especially in mission criti- cal applications. Do not continue to use a battery that is showing excessive loss of capacity, it should be properly recycled / disposed of and replaced. For most applications, batteries should be replaced after one year of service to maintain customer satisfaction and minimize safety concerns. Collect and recycle waste batteries separately from the device in com- ply with European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/19/EU and subsequent modifications, US and China regula- tory and others laws and regulations about the environment. CAUTION Always charge the battery at 0° - 45°C tempera- ture range. Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Balluff reseller. The use of any other power sup- plies can damage the device and void your war- ranty. Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if damaged, may cause the battery to generate heat, explode or ignite. Do not place the battery in or near fire, on stoves or other high temperature locations. Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather. Doing so may cause the battery to generate heat, explode or ignite. Using the battery in this manner may also result in a loss of performance and a shortened life expectancy. Do not place the battery in microwave ovens, high-pressure containers or on induction cook- ware. Immediately discontinue use of the battery if, while using, charging or storing the battery, the battery emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way. CAUTION Do not replace the battery pack when the device is turned on. Do not remove or damage the battery pack’s label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised.

12 BVS HS-PB Industrial Cordless Handheld Barcode Reader 4.1 Charging the Batteries Once the BAM MD-VS-001 base station (cradle) is powered, you can charge the reader's batteries. Place the BVS HS-PB reader into the cradle. The Reader LED on the cradle/battery charger turns red. The battery is completely charged when the Reader LED on the cradle/ battery charger turns green. The battery can also be charged in the spare battery slot (BAM MD-VS-001-0003 models only) or using the Multi Battery Char- ger accessory.

www.balluff.com 4 Installing the Battery Pack 13 4.1.1 Changing the Batteries 1 Push the button at the bottom of the handle as shown to release the battery. 2 Pull down to remove the battery. Do not incinerate, disassemble, short termi- nals or expose to high temperature. Risk of fire, explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect type. Dispose of the batteries as required by the relevant laws in force. WARNING Button 1 2

5 Programming The reader is factory-configured with a set of standard default features. Customize your reader through use of the programming barcodes available in the BVS HS-PB series. Check the corresponding features section for your interface, and also the Data Editing and Symbologies chapters of the OPM. 5.1 Using Programming Barcodes This manual contains barcodes which allow you to reconfigure your reader. Some programming barcode labels, like the , require only the scan of that single label to enact the change. Other barcodes require the reader to be placed in Programming Mode prior to scanning them. Scan an ENTER/EXIT barcode once to enter Programming Mode; scan the desired parameter settings; scan the ENTER/EXIT barcode again to accept your changes, which exits Pro- gramming Mode and returns the reader to normal operation. 5.2 Configure Other Settings Additional programming barcodes are available in the OPM to allow for customizing programming features. If your installation requires different programming than the standard factory default settings, refer to the OPM. 5.3 Resetting Product Defaults If you aren’t sure what programming options are in your reader, or you’ve changed some options and want your custom factory settings restored, scan the barcode below to reset the reader to initial configu- ration. See the OPM for other options, and a listing of standard factory settings. NOTE Factory defaults are based on the interface type. Be sure your reader is configured for the correct interface before scanning this label. Reset Default Settings

www.balluff.com 6 Set Date and Time 15 6 Set Date and Time 1 Scan the Enter/Exit Programming barcode below to set date and time. ENTER/EXIT PROGRAMMING MODE 2 Scan the Set Date barcode + six digits for Year, Month and Day (YYMMDD) from the "Hex-Numeric Keypad" on page 53. Set Date 3 Scan Set Time + six digits for Hours, Minutes and Seconds (HHMMSS) from the "Hex-Numeric Keypad" on page 53. Set Time 4 Scan the Enter/Exit Programming barcode to complete.

16 BVS HS-PB Industrial Cordless Handheld Barcode Reader 7 Linking the Reader 7.1 Link Balluff RF Devices to Base For RF devices, before configuring the interface it is necessary to link the handheld with the base. To link the handheld and the base, press the trigger to wake up the handheld and mount it into the base. If the reader was previously linked to another base, you must first press and hold the button on the base (>5 seconds), then scan the Unlink barcode before re-linking to the new base. 7.2 Linking to a Bluetooth Adapter in Serial Port Profile (Slave) Mode 1 Install any drivers provided with the Bluetooth adapter. 2 Scan the Enable RF Link to Server label below to make the scanner visible to the host computer. 3 Use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff Scanner." If you receive an error message, it may be necessary to disable security on the device. 4 Use an RS-232 terminal program to see incoming data on the port designated by the computer's Bluetooth manager. Unlink Enable RF Link to Server

www.balluff.com 7 Linking the Reader 17 7.3 Linking to a Bluetooth Adapter in HID mode 1 Install any drivers provided with the Bluetooth adapter. 2 Scan the Link to PC in HID label below. 3 Use the host computer’s Bluetooth manager to “Discover new devices” and select "Balluff Scanner." If you receive an error message, it may be necessary to disable security on the device. 4 Use a text editor to see incoming data on the port designated by the computer's Bluetooth manager. NOTE The BVS HS-PB reader can be set up to require a PIN code when connecting. If you want to set up a PIN, or when adding new equipment to a system that uses a custom security PIN, please see the OPM for information. Link to PC in HID

18 BVS HS-PB Industrial Cordless Handheld Barcode Reader 7.4 Variable PIN Code Some Bluetooth drivers on the Host (such as WIDCOMM and Blue- Soleil 8) require a Variable PIN Code. When attempting connection, the application presents a window that includes a PIN Code which is to be input using the BVS HS-PB reader. Please read the barcode "Variable PIN Code" and restart the sequence from step 2 above. When you hear the beep and see the Green LED blinking indicating the reader is waiting for an alphanumeric entry, enter the required variable PIN Code by scanning the corresponding barcodes in the “Hex- Numeric Keypad” section at the back of this manual for alphanumeric entry. Finish by scanning the Exit HID Variable PIN Code label. Exit HID Variable PIN Code $P,CBTHP01,P\r Variable PIN Code

www.balluff.com 8 HID Country Mode 19 8 HID Country Mode When the Reader is connected with a Bluetooth Adapter in HID mode, you may want to set the country for which your PC is localized. In order to do that, read one of the configuration command labels below. HID COUNTRY MODE ENTER/EXIT PROGRAMMING MODE Country Mode = U.S. Country Mode = Belgium Country Mode = Britain Country Mode = Croatia

20 BVS HS-PB Industrial Cordless Handheld Barcode Reader HID COUNTRY MODE (continued) Country Mode = Czech Republic Country Mode = Denmark Country Mode = France Country Mode = French Canadian Country Mode = Germany Country Mode = Hungary

www.balluff.com 8 HID Country Mode 21 HID COUNTRY MODE (continued) Country Mode = Italy Country Mode = Japanese 106-key Country Mode = Lithuanian Country Mode = Norway Country Mode = Poland Country Mode = Portugal

22 BVS HS-PB Industrial Cordless Handheld Barcode Reader HID COUNTRY MODE (continued) Country Mode = Romania Country Mode = Spain Country Mode = Sweden Country Mode = Slovakia Country Mode = Switzerland

www.balluff.com 9 HID Caps Lock State 23 9 HID Caps Lock State This option specifies the format in which the reader sends character data. ENTER/EXIT PROGRAMMING MODE  Caps Lock State = Caps Lock OFF Caps Lock State = Caps Lock ON Caps Lock State = AUTO Caps Lock Enable

24 BVS HS-PB Industrial Cordless Handheld Barcode Reader 10 HID Alt Mode Read the configuration command label below for the HID Alt Mode fea- ture. ENTER/EXIT PROGRAMMING MODE  HID Alt Mode = OFF HID Alt Mode = ON

www.balluff.com 11 Power Off 25 11 Power Off Scan the barcode below to shut off power to the BT handheld until the next trigger pull. PowerOff

12 Reading Parameters Move the reader toward the target and center the aiming pattern and illumination system to capture and decode the image. See "Using the Balluff BVS HS-PB reader" on page 9 for more information. The aiming system will briefly switch off after the acquisition time, and if no code is decoded will switch on again before the next acquisition. The illuminator will remain on until the symbol is decoded. As you read code symbols, adjust the distance at which you are hold- ing the reader. 12.1 Good Read Green Spot Duration Successful reading can be signaled by a good read green spot. Use the barcodes that follow to specify the duration of the good read pointer beam after a good read. ENTER/EXIT PROGRAMMING MODE Disabled Short (300 ms) Medium (500 ms) Long (800 ms)

www.balluff.com 13 Operating Modes 27 13 Operating Modes 13.1 Scan Mode The imager can be set to operate in one of several scanning modes. See the OPM for more information and settings for any of the options: Trigger Single (Default) — When the trigger is pulled, scanning is activated until one of the following occurs: - a programmable duration1 has elapsed - a label has been read - the trigger is released Trigger Hold Multiple — When the trigger is pulled, scanning starts and the product scans until the trigger is released or “maximum scan on time”1 has elapsed. Reading a label does not disable scanning. Double Read Timeout1 prevents undesired multiple reads in this mode. Trigger Pulse Multiple — When the trigger is pulled and released, scanning is activated until programmable duration1 has elapsed or the trigger has been pulled again to transition to another state. Double Read Timeout1 prevents undesired multiple reads while in this mode. Flashing — The reader flashes1 on and off regardless of the trigger status. Always On — No trigger pull is required to read a barcode. Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trig- ger Single (Default) Mode. Double Read Timeout1 prevents undesired multiple reads while in this mode. Stand Mode — No trigger pull is required to read a barcode. Scan- ning is turned on automatically when an item is placed in reader’s field of view. If the trigger is pulled, the reader acts as if it is in Single Read mode. Double Read Timeout1 prevents undesired multiple reads while in this mode. 1. See the Operational Manual (OPM) for more information

13.2 Motion Aiming Control This feature configures the ability of the scanner to Enable/Disable the Aiming system when motion is detected. Scan the Enter/Exit Program- ming barcode above, then either of the barcodes below. ENTER/EXIT PROGRAMMING MODE  Scan Mode = Trigger Single Scan Mode = Trigger Pulse Multiple Scan Mode = Trigger Hold Multiple Scan Mode = Flashing Scan Mode = Always On Scan Mode = Stand Mode  Motion Aiming Control = Enable Motion Aiming Control = Disable

www.balluff.com 13 Operating Modes 29 13.3 Pick Mode Pick Mode is a Decoding and Transmission process where barcodes that are not within the configurable distance from the center of the aim- ing pattern are not acknowledged or transmitted to the host. It is active only in Trigger Single mode. If the scanner switches to a different Read Mode, Pick Mode is automatically disabled. 13.4 Multiple Label Reading The reader offers a number of options for multiple label reading. See the OPM or software configuration tool for descriptions of these fea- tures and programming labels. NOTE This feature is not compatible with Multiple Labels Reading in a Volume. See the OPM for more information. ENTER/EXIT PROGRAMMING MODE  PIck Mode = Disable Pick Mode = Enable

14 Technical Specifications The following tables contain Physical and Performance Characteristics, User Environment and Regulatory information. Item Description PHYSICAL CHARACTERISTICS Dimensions Height: 212 mm Length: 110 mm Width: 74 mm Weight 395 g ELECTRICAL CHARACTERISTICS Battery Type Li-Ion battery pack, 2150 mAh Charge time for full charge from full discharge 4 hours with external power supply adaptera a. Charge Times are much lower when battery is within daily typical operating condition. Typical 10 hours with Host power (in this case no supply adapter is needed)a Operating auton- omy (continuous reading) 30,000 reads (typical) Operating voltage cradle External Power Supply: USB: 10-30 Volt DC 5 Volt DC ±10% Operating current (cradle) Charging: 800 mA @10 V DC (Ext. Power) 500 mA @ 5 V DC (USB) Operation: 150 mA @10 V DC PERFORMANCE CHARACTERISTICS Light Source Aiming: Illumination: Laser, Class 2, Red LED, white Roll (Tilt) Tolerance ± 180° Pitch Tolerance ± 40° Skew (Yaw) Toler- ance ± 40° Print Contrast Mini- mum 15% minimum reflectance Reading Indications Beeper, 2x LED green; green light projection on the code

www.balluff.com 14 Technical Specifications 31 Item Description Resolution 1D 2.5 mil 2D 4 mil Reading distancesa a. All labels grade A,300 lux ambient light, 20°C, label inclination 10° The following specs represent standard barcodes that are traditionally printed black on white on paper labels. Reading distances for DPM may vary depending from the printing technology , the code type and the surface material the DPM is used on Code 39 2.5 mils: 2-6 cm 20 mils: 3-70 cm 40 mils: 3-110 cm EAN 13 13 mils: 3-60 cm PDF-417 10 mils: 2-30 cm DataMatrix 4 mil: 2-6 cm 10 mil: 2-20 cm

Decode Capability 1D Barcodes GS1 Databar linear codes, UPC/EAN (A,E,13,8), UPC/EAN with P2/ P5 Addons, UPC/EAN Coupons, ISBN, Code128, EAN128, ISBT128, Code39, Code39 Full ASCII, Code39 CIP, Code 32, Cod- abar, Interleaved 2 of 5, IATA, Industrial 2 of 5, Standard 2 of 5, Code11, MSI, Plessey, Code 93, Follet 2/5 2D / Stacked Codes DataMatrix, MaxiCode and QR Codes (QR, Micro QR and Multiple QR codes), Aztec Postal codes including: Australian Post, China Post, Japanese Post, KIX Post, Planet Code, Postnet, Royal Mail Code(RM45CC), IMB Stacked Codes EAN/JAN Composites; GS1 Databar Composites, GS1 Databar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional; MacroPDF; Micro PDF417; PDF417; UPC A/E Composites, French CIP13, Grid Matrix(Chinese) code 2D Codes DataMatrix, MaxiCode and QR Codes (QR, Micro QR and Multiple QR codes), Aztec Code, China Han Xin Code DIRECT PART MARKING (DPM) CAPABILITY: BVS HS-PB-DPW: Codes are generally readable when marked by laser or chemical etching or ink jet printed; Data Matrix codes are also readable when marked by dot peening on flat materials. Any codes needs to be tested for reliable reading. BVS HS-PB-HDW: NONE Interfaces Supported RS-232, USB and Bluetooth. USER ENVIRONMENT Operating Temperature -20° to +50° C Storage Temperature -40° to +70° C Humidity 0 to 95% non-condensing Drop Specifications Scanner withstands >50 times 2 m drops to concrete Ambient Light Immunity 100,000 Lux Contaminants: Spray/ rain, Dust/particulates IP65 ESD Level 20 KV Beeper/Speaker volume >= 80 dB @ 10 cm

www.balluff.com 14 Technical Specifications 33 REGULATORY Electrical Safety UL 60950, CSA C22.2 No. 60950, IEC 60950 EMI/RFI North America (FCC) : Canada ( IC); Rus- sia ( Gost); European Union R&TTE Direc- tive; Japan; Korean KCC; Taiwan; Australia; Mexico Laser Class Safety IEC Class 2 Radiation 1 mW Avg., Emitted wavelength 650 nm, 12ms pulse, Beam Divergence 8.4 deg x 8.1 deg (“plus” pattern) LED Classification IEC 62471 Class 1 LED BLUETOOTH FEATURES Protocol Bluetooth 3.0 Compliant, Class 1 Frequency working center 2400 to 2483.5 MHz Range (in open air) up to 100ma Max number of devices per base station 4 a. Range distances are measured using the base station. Range with connection to other Bluetooth peripherals may show different results.

34 BVS HS-PB Industrial Cordless Handheld Barcode Reader 15 LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. The green LED Spot backprojected on the code provides a reliable feedback to the user. The following tables list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and so may or may not be turned on. For example, certain indications such as the power-up beep can be disabled using programming barcode labels. Normal Operating Indicators INDICATION DESCRIPTION LED BEEPER Power-up Beep The reader is in the process of powering-up. N/A Reader beeps four times at highest frequency and vol- ume upon power- up. Good Read Beep A label has been successfully scanned by the reader. LED behavior is configurable via the feature “Good Read: When to Indi- cate” (see the OPM for infor- mation.) The reader will beep once at cur- rent frequency, volume, tonal set- ting and duration upon a successful label scan. Green LED Spota flashes momentarily Upon success- ful read of a label, the soft- ware turns the green spot on for the time specified N/A N/A Image Capture When ready to capture image Blue light flashes 2 times when updating N/A a Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

www.balluff.com 15 LED and Beeper Indications 35 Error Indicators INDICATION DESCRIPTION LED BEEPER Link Attempt The reader is try- ing to link to the base Slow Flashes N/A Configuration Alignment Reader and Base are aligning the parameters' con- figuration Fast Flashes N/A Link The reader has successfully linked to the base N/A 3 beeps of ascending fre- quency Unlink The reader has unlinked from the base N/A 3 beeps of descending fre- quency ROM Failure There is an error in the reader's software/pro- gramming Flashes Reader sounds one error beep at highest volume. Limited Scanning Label Read Indicates that a host connection is not established. N/A Reader 'chirps' six times at the high- est frequency and current volume. Reader Disabled The reader has been disabled by the host. The LED blinks con- tinuously N/A

36 BVS HS-PB Industrial Cordless Handheld Barcode Reader Programming Mode - The following indications ONLY occur when the reader is in Programming Mode. INDICATION DESCRIPTION LED BEEPER Label Program- ming Mode Entry A valid program- ming label has been scanned. LED blinks continu- ously Reader sounds four low fre- quency beeps. Label Program- ming Mode Rejection of Label A label has been rejected. N/A Reader sounds three times at low- est frequency and current volume. Label Program- ming Mode Acceptance of Partial Label In cases where mul- tiple labels must be scanned to pro- gram one feature, this indication acknowledges each portion as it is suc- cessfully scanned. N/A Reader sounds one short beep at highest frequency and current vol- ume. Label Program- ming Mode Acceptance of Programming Configuration option(s) have been successfully pro- grammed via labels and the reader has exited Programming Mode. N/A Reader sounds one high fre- quency beep and 4 low frequency beeps followed by reset beeps. Label Program- ming Mode Cancel Item Entry Cancel label has been scanned. N/A Reader sounds two times at low frequency and current volume.

www.balluff.com 16 Error Codes 37 16 Error Codes Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the sequence will be repeated. Press and release the trigger to hear the FRU indica- tion code. The following table describes the LED flashes/beep codes associated with an error found. Number of LED Flashes/Beeps Error Corrective Action 1 Configuration Contact Helpdesk for assistance 2 Interface PCB 6 Digital PCB 11 Imager

17 Regulatory Addendum ©2014-2015 Datalogic ADC, Inc.o All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. 850012614 Rev. A June 2015

www.balluff.com 17 Regulatory Addendum 39 Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 ©2014-2015 Datalogic ADC, Inc. All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-exclu- sive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. All contact should be to us. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Data- logic S.p.A. in many countries, including the U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners. Patents See www.patents.datalogic.com for patent list. This product is covered by one or more of the following patents: Design patents: AU344427, AU344428, AU344429, EP001970237, EP002109371, TWD159476, TWD159477, TWD160254, TWD160255, USD682277, USD702238, ZL201230284676.X, ZL201330082835.2 Utility patents: EP0996284B1, EP0999514B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1828957B1, EP1873886B1, JP4435343B2, US6478224, US6512218, US6513714, US6561427, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US7721966, US7948214, US8245926, US8561906, US8743263, ZL200780030808.2.

17.1 Regulatory Information All models are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to operate the equipment. Statement of Agency Compliance This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Class B Compliance Statement To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be main- tained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Cofetel Mexico Update CAUTION Exposure to Radio-Frequency Radiation CAUTION The PowerScan™ Handheld Reader is not user- serviceable. Opening the case of the unit can cause internal damage and will void the warranty. Este Producto es usable en México Certificado Nr. RCPDADL09-1251 (COFETEL) La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

www.balluff.com 17 Regulatory Addendum 41 Customs Union The CU conformity certification has been achieved; this allows the Product to bear the Eurasian mark of conformity. NCC Statement: 本模組於取得認證後，將依規定於模組本體標示審驗合格標籤，並要 求平台廠商 於平台上標示 『本產品內含發射器模組： 根據 NCC 低功率電波輻射性電機管理辦法 規定 : 第十二條 經型式認證合格之低功率射頻電機，非經許可， 公司、商號或使用者 均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾 合法通信；經發現有 干擾現象時，應立即停用， 並改善至無干擾時方得繼續使用。 前項 合法通 信，指依電信法規定作業之無線電通信。 低功率 射頻電機須 忍受合法通信或工業、科學及醫療用 電波輻射性電 機設備之干擾。 CCAJ14LP0060T3

Korean Statement Anatel (Brazil conformity) Modelo PBT9500 Base carregadora BC9030-BT, BC9130-BT, BC9180-BT “Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a siste- mas operando em caráter primário.” 전기안전관리법의 의한 표기사항 YU12254-14002 1. 제품명칭 : 전지(리튬이온전지) 2. 모델명 : BT-1 3. 정 격 : 3.7 Vdc, 2 100 mAh 4. 제조자딩 : Shenzhen Bak Technology Co., Ltd 5. 신고 인 : Shenzhen Bak Technology Co., Ltd 6. 제조국 : 중국 7. 제조년월 : 2014-04 8. 아프터서비스연락처 : 데이터로직에이디씨싱 가포르피티이엘티디 한국사무소 02-3281-9296

www.balluff.com 17 Regulatory Addendum 43 CHINA ROHS TABLE OF RESTRICTED ELEMENTS (SCANNER)

CHINA ROHS TABLE OF RESTRICTED ELEMENTS (BASE)

www.balluff.com 17 Regulatory Addendum 45 17.2 WEEE Statement English Our BVS HS-P and BVS HS-Q series handheld readers are only intended for commercial use as B2B devices as per the WEEE Direc- tive. The WEEE Directive, valid across the EU, is a standard defining how waste electrical equipment has to be handled. For you, this means that the handheld readers must not be disposed of in normal household waste or taken to a collection point of public waste disposal authorities. In the event of disposal, you can return the handheld reader to us. We will then ensure it is recycled in accordance with the applicable legal requirements. For your return shipment, please use our RMA process, which you will find on our website. We are unable to reimburse costs for shipping/packaging. If the handheld reader to be returned is type BVS HS-QB or BVS HS- PB, the internationally valid shipping regulations for lithium-ion batteries must be observed. German Unsere Handheld Reader der BVS HS-P bzw. BVS HS-Q Baureihe sind ausschließlich für den gewerblichen Gebrauch vorgesehen als sog. B2B-Geräte gemäß der WEEE-Richtlinie. Die EU-weit gültige WEEE-Richtlinie definiert einheitlich wie Elektro- Altgeräten behandelt werden müssen. Für Sie bedeutet das, dass die Handheld Reader weder über den nor- malen Hausmüll entsorgt, noch bei einer Sammelstelle eines öffentlich- rechtlichen Entsorgungsträger abgeben werden dürfen. Im Falle einer Entsorgung können Sie die Handheld Reader an uns zurücksenden. Wir stellen dann die Verwertung nach den jeweils geltenden gesetzli- chen Vorschriften sicher. Für die Rücksendung verwenden Sie bitte unseren RMA-Prozess, den Sie auf unserer Webseite finden. Die Kosten für Versand/Verpackung können wir nicht erstatten. Falls der zurückzusendende Handheld Reader vom Typ BVS HS-QB oder BVS HS-PB ist, sind die international gültigen Versandvorschriften für Lithium-Ionen-Batterien zu beachten. Waste Electrical and Electronic Equipment (WEEE) Statement

17.3 Imager Labeling 17.3.1 Aiming System The PowerScan™ aiming system meets the Class 2 requirements for laser safety. The laser information is located on the sides of the Scan- ner as shown below. Sample labels are shown here to illustrate their location only. Please view the labels on your product for actual details, as they may vary from those depicted. I D F E LA LUCE LASER È VISI- BILE ALL'OCCHIO UMANO E VIENE EMESSA DALLA FINES- TRA INDI- CATA NELLA FIGURA. DIE LASER- STRAHLUNG IST FÜR DAS MEN- SCHLICHE AUGE SICHTBAR UND WIRD AM STRAHLAUS TRITTSFENSTER AUSGESENDET (SIEHE BILD) LE RAYON LASER EST VISIBLE À L'OEIL NU ET IL EST ÉMIS PAR LA FENÊTRE DÉSIGNÉE SUR L'ILLUS- TRATION DANS LA FIG- URE A LUZ LÁSER ES VISIBLE AL OJO HUMANO Y ES EMITIDA POR LA VEN- TANA INDI- CADA EN LA FIGURA. LUCE LASER NON FIS- SARE IL FAS- CIO APPAREC- CHIO LASER DI CLASSE 2 MASSIMA POTENZA D'USCITA: LUNGHEZZA D'ONDA EMESSA: CONFORME A EN 60825-1 (2007) LASERSTRAH- LUNG NICHT IN DEN STRAHL BLICKEN PRO- DUKT DER LASERKLASSE 2 MAXIMALE AUS- GANGSLEISTUNG: WELLENLÄGE: ENTSPR. EN 60825-1 (2007) RAYON LASER EVITER DE REGARDER LE RAYON APPA- REIL LASER DE CLASSE 2 PUISSANCE DE SORTIE: LONGUEUR D'ONDE EMISE: CONFORME A EN 60825-1 (2007) RAYO LÁSER NO MIRAR FIJO EL RAYO APARATO LÁSER DE CLASE 2 MÁX- IMA POTEN- CIA DE SALIDA: LONGITUD DE ONDA EMIT- IDA: CONFORME A EN 60825-1 (2007) Aiming System Output Window Scanner Regulatory Labels

www.balluff.com 17 Regulatory Addendum 47 ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your termi- nal. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. The product utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through reflective surfaces such as mirrors, etc. ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1. Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o manutenzione. Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli specchi. WARNING Use of controls or adjustments or perfor- mance of procedures other than those spec- ified herein may result in exposure to hazardous visible laser light. ATTENZIONE L'utilizzo di procedure o regolazioni dif- ferenti da quelle descritte nella docu- mentazione può provocare un'esposizione pericolosa a luce laser visibile.

DEUTSCH Die folgenden Informationen stimmen mit den von international Behörden festgelegten Sicherheitshinweisen überein, und beziehen sich auf den korrekten Gebrauch des Scanners NORM FÜR DIE LASERSICHERHEIT Am Tag der Herstellung entspricht dieses Gerät den gültigen Laser- sicherheitsnormen EN 60825-1 und CDRH 21 CFR 1040. Das Gerät muss für den Betrieb oder Installations- und Wartungs- arbeiten nicht geöffnet werden. Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-Arbeiten zu öffnen. Das Produkt verfügt über eine Laserdiode. Obwohl zur Zeit nicht bekannt ist, dass durch kurze Einstrahlung von Laserlicht ins Auge Augenschäden entstehen können, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu schauen. Richten Sie den Laserstrahl nicht auf die Augen eines Beobachters, noch auf reflektierende Oberflächen. FRANÇAIS Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et se réfèrent à une correcte utilisation du ter- minal. NORMES DE SECURITE LASER Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN 60825-1. Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien. Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple). ACHTUNG Jegliche Änderungen am Gerät sowie jegliche Benutzung, die nicht in dieser Betriebsanleitung beschreiben ist, können gefährliches Laserlicht verursachen ATTENTION L'utilisation de procédures ou réglages dif- férents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible.

www.balluff.com 17 Regulatory Addendum 49 ESPAÑOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal. NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de producción: CDRH 21 CFR 1040 y EN 60825-1. No es necesario abrir el aparato para la instalación, la utilización o la manutención. El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a consecuencia de una exposición de corta dura- ción. Eviten de mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un observador, también a través de superficies reflectantes como los espejos. ATENCIÓN La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la docu- mentación puede causar una exposición peligrosa a la luz láser visible.

17.4 Letter of Conformity La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per: This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for: Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour: Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für: Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para: PowerScan PBT9500 ; Cordless Barcode Reader BC9XY0-BT ; Cordless Base Station/Charger sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente: 1999/5/EC - R&TTE Directive 2011/65/EU RoHS Directive Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti: This declaration is based upon compliance of the products to the following standards: Cette déclaration repose sur la conformité des produits aux normes suivantes: Diese Erklärung basiert darauf, dass das Produkt den folgenden Normen entspricht: Esta declaración se basa en el cumplimiento de los produc tos con las siguientes normas: Datalogic ADC Srl, Via S. Vitalino, 13 Lippo di Calderara di Reno (BO) 40012 Italy EC-100 Rev.: 1 Pag.: 1 di 1 e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos ETSI EN 301 489-17 V2.2.1, SEPTEMBER 2012 : ELECTROMAGNETIC COMPATIBILITY AND RADIO SPEC- TRUM MATTERS (ERM); E LECTROMAGNETIC COMPATI- BILITY (EMC) STANDARD FOR RADIO EQUIPMENT ; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS ETSI EN 300 328 V1.8.1, JUNE 2012 : ELECTROMAGNETIC COMPATIBILITY AND RADIO SPEC- TRUM MATTERS (ERM); WIDEBAND TRANSMISSION SYS- TEMS; DATA TRANSMISSION EQUIPMENT OPERATING IN THE 2,4 GHZ ISM B AND AND USING WIDE BAND MOD- ULATION TECHNIQUES; HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE EN 60950-1, DECEMBER 2006 + AMENDMENT A11:2009 + AMENDMENT A1:2010 + AMENDMENT A12:2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1 : GENERAL REQUIREMENTS EN 50581, SEPTEMBER 2012 : TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES Lippo di Calderara, December 9th, 2014 14

www.balluff.com 18 Cleaning 51 18 Cleaning Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to ensure best performance during scanning. Use a soft, dry cloth to clean the product. If the product is very soiled, clean it with a soft cloth moistened with a diluted non-aggressive clean- ing solution or diluted ethyl alcohol. CAUTION Do not use abrasive or aggressive cleansing agents or abrasive pads to clean scan windows or plastics. Do not spray or pour liquids directly onto the unit.

19 Ergonomic Recommendations - Reduce or eliminate repetitive motion - Maintain a natural position - Reduce or eliminate excessive force - Keep objects that are used frequently within easy reach - Perform tasks at correct heights - Reduce or eliminate vibration - Reduce or eliminate direct pressure - Provide adjustable workstations - Provide adequate clearance - Provide a suitable working environment - Improve work procedures. 19.1 Services and Support Balluff provides several services as well as technical support through its website. Log on to www.Balluff.com, choose your country and then click on the links indicated for further information. Products Search through the links to arrive at your product page where you can download specific Manuals, Data Sheets, List of Accessories etc. Alternatively you can search for our Balluff Order code, for instance BVS001T, for fast access to the product page. Service - Contact us: Here you find your service addresses RMA Return Shipment - Information and form for Return Material Authorization (RMA) Repairs CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

www.balluff.com 20 Hex-Numeric Keypad 53 20 Hex-Numeric Keypad Use the barcodes that follow to enter numbers as you would select dig- its/characters from a keypad. 0 1 2 3 4 5

www.balluff.com 20 Hex-Numeric Keypad 55 C D E F 20.1 For HID Variable Pin Code only If you make a mistake, scan the CANCEL barcode below to abort and not save the entry string. You can then restart. Finish by scanning the Exit HID Variable PIN Code label. Cancel an incomplete HID Variable PIN Code Exit HID Variable PIN Code

World Headquarters Germany Balluff GmbH Schurwaldstraße 9 73765 Neuhausen a.d.F. Deutschland Tel. +49 7158 173-0 Fax +49 7158 5010 [email protected] www.balluff.com Subsidaries USA Balluff Inc. 8125 Holton Drive Florence, Kentucky 41042-0937 Phone (859) 727-2200, 1-800-543-8390 [email protected]