Matrix T5x Manual 

The MATRIX treadmill is inspected before it is packaged. It is shipped in four pieces: the base, the upright console supports, the handlebar and the console. Carefully unpack the unit and dispose of the box material. CHapter 4: T7xe Overlay And Workout Description The T7xe has a full integrated touch screen display. All information required for workouts is explained on screen. Exploration of the interface is highly encouraged. The information explaining how to program for various workouts will give an explanation about the contents of each screen on the T7xe. quick s ...

Open Yellow Assembly Bag. Make appropriate wire connections to the faceplate and then assemble to the console base using item 13-socket head cap screw, item 23-lock washer, item 16-socket head cap screw and item 23-lock washer. Item 16 is a shorter socket head cap screw and gets assembled into the holes closest to the running surface. All holes applicable to this assembly step can be noted by the embossed arrow next to the hole. Open Red Assembly Bag. Assemble the console base to the console masts using item 15-button head cap screw and item 14-flat w ...

1.1 Before getting Started It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment. It is recommended that all users of Matrix Fitness Systems exercise equipment be informed of the following information prior to its use. 1.2 proper usage Do not use the equipment in any way other than designed or intended by the manufacturer. It is imperative that all Matrix Fitness Systems equipment is used properly to avoid inj ...

5.4 T5x, T7x, T7xe Model ASSEMBLY STEPS OPTIONAL LEVELING ASSEMBLY TECHNIQUES: Use of shim or adding leveling foot. Remove the leveling shim provided on the underside of the treadmill. The shim can be found mounted on the underside of the right hand side rail. Remove the rear foot on the side of the treadmill that is resting low. Install the shim as shown above and return the rear foot. When installing the optional rear leveling foot accessory, remove the existing rear foot. Replace with new leveling foot and fas ...