Anchor TourVox Quick Start Manual
Text of the manual
BASIC SYSTEM OPERATION
BATTERY INSTALLATION
1. Position the TourVox with the front/speaker facing toward your audience
2. Connect MIC-50 or HBM-50 microphone to the 1/4“ MIC jack
3. Turn the TourVox POWER/VOLUME LEVEL knob on. The red POWER LED will
light and remain lit during operation
4. Set the microphone power switch to ON
5. Adjust the volume with the
HAVING TROUBLE WITH YOUR PA SYSTEM?
CONDITION
POSSIBLE SOLUTIONS
No Sound (Power LED: OFF)
• Turn POWER switch ON
• Charge batteries
No Sound (Power LED: ON)
• Make sure mic cable is completely plugged in
• Turn microphone volume on
Shortened Battery Life
• Replace batteries and fully charge new batteries before use
• ‘Cycle’ NiMH batteries
D
