American Standard Gold 824 Operation & User’s Manual

Wizard guides you through the Gold 824’s User configurable settings. To complete the Setup Wizard and connect the Gold 824 to Nexia™ smart home, you need: • A high-speed connection to the Internet (wired or wireless) • Your wireless (WiFi) network name and password • An internet browser • A valid e-mail address To access the User Setup Wizard, press MENU > SETTINGS > USER SETUP WIZARD. When the Setup Wizard is activated, the process cannot be cancelled. The Wizard will guide you through the following steps: Screen Settings • Adjust the Scre ...

Navigating the Control Home Screen - Simple View Default Home Screen can be customized with several widgets. To learn more about this feature see the section in this user guide about customization. ...

Adding Widgets To maintain a temperature indefinitely, adjust the setpoint to the desired temperature and press the Permanent Hold button. It will then display ON, and the control will maintain that temperature setpoint until you manually change it. Press the Permanent Hold button again to turn Permanent Hold OFF. The Control resumes following the schedule. Optionally, up to 2 widgets may be chosen to appear on your home screen. They can be selected by navigating to Menu > Settings > Screen > Screen Layout When scheduling is enabled, the Preset button is disabled and ...

A Nexia registration button is located on the Menu screen of the Gold 824. After the control is registered with Nexia the button may be used to add devices or remove devices from a Z-Wave network. Z-Wave Settings may be used to add or remove Z-Wave devices before connecting the control (thermostat) to a local area Wi-Fi network and registering the control with Nexia smart home. An installer can now add all of the Z-Wave devices a customer has purchased into the control’s Built in Nexia Bridge prior to connecting the control to the homeowner’s local area network and r ...