Radiodetection RD1000 Operation Manual

Section 3 Getting Started 3.1 Using the Display Unit The Display Unit has 8 buttons numbered 1 to 8, larger Pause and Camera buttons as well as buttons to increase and decrease the screen Contrast and Brightness. Turn on the system by pressing any button on front of the Display Unit. Both red lights will illuminate and after few seconds, the splash screen and menu will appear. Figure 3.1: display unit The menu option on the screen above the button indicates its function. To operate the system: The first screen displayed when the system is powered on is the System ...

FCC Ground Penetrating Radar Coordination Notice NAME: ADDRESS: CONTACT INFORMATION [CONTACT NAME AND PHONE NUMBER]: AREA OF OPERATION [COUNTIES, STATES OR LARGER AREAS]: FCC ID: [E.G. QJQ-PE-PRO-TLF-A)] EQUIPMENT NOMENCLATURE: [E.G. PULSEEKKO PRO TLF- A] Send the information to: Frequency Coordination Branch., OET Federal Communications Commission 445 12th Street, SW Washington, D.C. 20554 ATTN: UWB Coordination Fax: 202-418-1944 INFORMATION PROVIDED IS DEEMED CONFIDENTIAL ...

3.7 Screen icons 3.7.1 Systems settings menu Scan English Units Scale Date Time Power Off Def. ...

Preface Before you begin Thank you for your interest in Radiodetection’s RD1000™ ground penetrating radar system. Please read this operation manual before attempting to use the RD1000™ system. Radiodetection products, including this manual, are under continuous development. The information contained within is accurate at time of publication; however the RD1000™, this manual and all its contents are subject to change. Radiodetection Limited reserves the right to modify the product without notice and some product changes may have taken place after this user m ...

ETSI Regulations for the EC In the European Community (EC), GPR instruments must conform to ETSI (European Technical Standards Institute) standard EN302066. Details on individual country requirements for licensing are coordinated with this standard. For more information, contact the GPR system vendor. This GPR product offered for sale in European Community countries or countries adhering to ETSI standards is tested to comply with EN302066. ...

name, address and other pertinent contact information of the user, the desired geographical area(s) of operation, and the FCC ID number and other nomenclature of the UWB device. If the imaging device is intended to be used for mobile applications, the geographical area(s) of operation may be the state(s) or county(ies) in which the equipment will be operated. The operator of an imaging system used for fixed operation shall supply a specific geographical location or the address at which the equipment will be operated. This material shall be submitted to: Frequency ...

Pressing the Pause button opens the Image Settings Screen to change the current Color Palette, Depth, Filter and Gain (see Section 3.5). Stopping and pulling the cart backwards along the same path automatically opens the Locating Screen (See Section 3.4) used to pinpoint the position and depth of a target. 3.4 Locating screen The Locating Screen is accessed by stopping and pulling the cart backwards while scanning. The cursor moves over the image and menu options appear at the bottom of the screen. Figure 3.9: locating screen 3.4.1 Locating Cursor The Cursor cons ...