QuickWorldWide Quick 50 Pro Assembly And Maintenance Manual

TABLE OF CONTENTS INTRODUCTION 3 CUSTOMER SERVICE 4 FEATURES 5 FRE-ASSEMBLY INFORMATION 6 REQUIRED TOOLS 7 HARDWARE & OPTIONAL ACCESSORIES 8 OTHER HARDWARE & OPTIONAL ACCESSORIES 9 OTHER REQUIREMENTS 12 PART LIST 13 SECTION 1: UPPER FRAMES 14 SECTION 2: LOWER FRAMES 28 SECTION 3: LANDING GEAR ASSEMBLY 40 SECTION 4: DRIVING SYSTEM 42 SECTION 5: TAIL ASSEMBLY 44 SECTION 6: CONTROL SYSTEMS 50 SECTION 7: ROTOR HEAD 53 SECTION 8: LINKAGE RODS AND SETTINGS 56 FRE-LIGHT CHECKS 72 WARNINGS 73 ADJUSTMENTS 74 HOW TO HOVER 75 HOW TO FLY FORWARD 77 AFTER FLIGHT CHECKS 78 WHAT IF THE HELICOPTER CRASHED 78 SPECIFICTION 79 INTRODUCTION

Congratulation and thank you for the purchase of great product! It is our sole desire for you to enjoy the quality workmanship and performance of any of our Nitro powered helicopters. We believe we have the latest designs and technology incorporated into our model helicopters. Our CNC parts are produced using the best high density materials & anodized using material hardening finishes with the tightest of tolerances. Our new helicopters feature the latest advances in R/C helicopter design. The simple and mechanically superior EMS design (also known as CCPM) ensures a helicopter that will be more responsive and more stable than any other R/C helicopter you have ever flown. Three servos are attached directly to the Swashplate to ensure precise control. This kit features all metal construction, and a carbon or composite frames are standard. Along with great products, our staffs are RC guys that fly and have hands on experience with total manufacturing & testing of our helicopters. In addition, we stand behind all our products 100% with satisfaction guaranteed. Our kits will be shipped 100% complete and we can assure you that once you fly your helicopter you will love it. The QUICK 50 We believe you hold in your hands one of the best helicopters manufactured in the world today. The Quick 50 is one of the famous versions of our Big Nitro Quick line. It is a bigger, stronger frames, yet powerful machine. This baby delivers amazing power smoothly throughout the entire range of its nitro motor. It functions so responsive and stable. The Quick 50 Pro version features a fully machined head, metal grips, dual bearing tail rotor, carbon fiber frames, carbon rudder push rod, and carbon fiber boom supports. The Big Quick 50 Sport version features a G10 fiberglass frame, machined metal head, molded plastic grips, carbon boom supports, carbon rudder push rod, and dual bearing tail rotor. Our helicopters are carefully designed and tested, and manufactured of the highest quality materials available. In a short time, you can be flying. We ask that you please read the entire manual before starting the construction of the Quick 50, and if you have any questions our technical support staff can be reached at (610) 282-4811 M-F 9-6, S 9-4 Eastern time, or by email at [email protected]. For the latest information and updates, please visit our website at www.quickworldwide.com

Coopersburg, PA 18036 Phone: (610)-282-4811 Fax: (610)-282-4816 Websites: http://www.hhiheli.com http://www.quickheli.com http://www.giantscaleplanes.com E-mail: [email protected] Office Hours: Mon – Fri: 8:30 – 6:00 Sat: 8:30 – 1:30 (Eastern Daylight Time) Technical Support Personnel: Chuck – [email protected] Jon – [email protected] Page 4 of 79

Frames or Carbon Fiber. These frames are not only rigid but will provide excellent vibration absorption. 2. One-Way Hex Start Shaft System: The one-way bearing allows the engine to continue to run after the starter motor has been stopped. 3. Constant Tail Rotor Drive System: The constant tail system will provide full tail authority during engine off maneuvers. 4. Belt driven Tail: Belt Driven tail is not only a reliable way to drive a tail, but is also very smooth and low maintenance. 5. High Quality Ball Bearings: Quick 50 offers ball bearings on all moving parts. 6. EMS Collective System: The EMS Collective design allows ease of setup with fewer moving parts. EMS constitutes overall design simplicity and represents the future of helicopter technology. 7. Heavy-Duty Clutch System: Based on the same design as our famous heavy-duty clutch upgrade that fits most popular machines, this clutch will give many years of problem free operation. 8. Control Linkages: The control linkages that are provided with the Quick Learner Kit are high quality 2.3mm stainless steel rods and the rod ends are made of a high quality Delrin. 9. Single Blade Axle Design: The single blade axle design is simple very responsive system, with very consistent flight characteristics. 10. Advanced Airfoil Fly-bar Paddles: These paddles will provide the best both kind of flight characteristics for both 3D & Sport flying. Not only do they provide smooth forward flight, they also provide quick response upon demand. 11. Rearward facing Engine Design: This design provides quick access to the glow plug and is advantageous for easy engine removal. Page 5 of 79