Saey Accent Installation And Operation Manual

- 1 pair of heat resistant gloves If anything is missing, please inform your installer as soon as possible. 9. Installing the stove All local regulations, including national and European standards must be followed when the appliance is installed. Only an appliance connected by a recognised installer guarantees compliance with legislation on construction and fire prevention. This is certainly required for safe and proper use of the stove. The stove may only be installed on a floor with adequate load-bearing capacity. If the floor is non-compliant, then steps will have to be taken ...

The secondary air is used to burn the solid particles in the smoke. This reduces the exhaust and raises the efficiency. 12. Heating The heating itself can only be done with the front door closed! Even when the stove is not working, the front door should stay closed. 12.1 Lighting Ensure maximum air supply when lighting the stove (air lever in start position). Put a good layer of kindling on the grate of the stove. Put two larger woodlogs on top of it. Put some firelighters in between and light them. Close the fire d ...

� The appliance may only be used when the fire door is closed. The doors of the stove must also be closed when the appliance is not in use. � Take account of the power of the stove when loading wood. E.g. for a power of 8 kW you need ± 2.5 kg of wood per hour. 11. Operation � Opening the fire door Open the firedoor by lifting the door handle. Watch out, use the heat resistant gloves when the door handle is hot. � Operating the air inlet General: Fuel Operating the primary air inlet Choice of fuel (on back of stove) Operating the secondary ai ...

Fire safety measures concerning inflammable or temperature-sensitive floor coverings: � The surface under the stove must have a fire-resistant, non-inflammable covering (e.g. cast iron plate, marble or tile,…) Inflammable materials like for example carpet, parquet or cork should be protected. � All inflammabel or temperature sensitive objects that are in a radius of 80 cm around the stove, should be sufficiently protected. Safety distance to inflammable or temperature-sensitive items: � To the sidewalls of the stove: at least 30 cm � ...

- 1 pair of heat resistant gloves If anything is missing, please inform your installer as soon as possible. 9. Installing the stove All local regulations, including national and European standards must be followed when the appliance is installed. Only an appliance connected by a recognised installer guarantees compliance with legislation on construction and fire prevention. This is certainly required for safe and proper use of the stove. The stove may only be installed on a floor with adequate load-bearing capacity. If the floor is non-compliant, then steps will have to be taken ...

constant oxygen supply. To reduce the possible undesirable effects of long-term reduced air supply, it is best to let the stove burn for a quarter of an hour at full power every day that it is used. Possible undesirable effects: � Smouldering fire, condensation, tar deposits � High levels of soot � Smoke problems (emissions of poisonous substances) � Risk of explosion Wood is not suitable for a small fire! In other words, a wood-burning stove can not be choked. It can just take a long time to burn ful ...