for Living 088-1648-6 Assembly Instructions

Do not sit or stand on this table. A weighted umbrella base must be used when using an umbrella with this table. Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required. Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should always be under direct adult supervision while using this product. Retain these assembly instructions for future reference. SERVICE CENTRE TOLL-FREE TEL:1-877-539-7436 FAX:1-877-539-7439 8 1 8 8 Sutton Collection Dining Table 088-1648-6 (TCS64LC) ASSEMBLY INSTRUCTIONS ATTENTION:THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY. ! FIGURE 1 1 4 14 7 PARTS LIST PART NO. MATERIAL CODE PART QTY 1 2 3 4 5 6 17C01A0706002Y4 13C??1B29008001 17FA05040301-Y4 18000337002 17KAA0201----Y4 WASHER d6.5*D13*1.0 BOLT CAP M6 HEX KEY WRENCH 6 MM TCS64LC-CS04-1 TCS64LC-CS05-1 TABLE TOP LEG TILE BOLT M6*16 2 2 4 5 6 4 5 6 2 1 1 2 Note: The tiles can be easily broken, be careful when you remove them. Do not throw the residual tiles away. Retain them for future use. Step 1: Place the table top (1) onto a non-abrasive surface, such as a carpet, with its underside facing upwards. Fasten the legs (2) to the underside of the table top (1) rim by using bolts (4) and washers (5). Make sure that all of the bolts have been tightened completely and cover them with bolt caps (6). ! ! ! ! ! ! 2

If you need parts, whether they are missing or damaged, call Toll Free TEL: 1-877-539-7436 FAX: 1-877-539-7439 Call us between 9:00 AM and 4:30 PM Eastern Time, Monday through Friday. PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. SHOULD YOU NOT LOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECT ALL PACKING MATERIAL FOR ANY SMALL PARTS THAT MAY HAVE BECOME SEPARATED DURING SHIPMENT. SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY, OR IF ANY PART IS MISSING OR DAMAGED, PLEASE CALL THE HELPLINE AT 1-877-539-7436. PLEASE PROVIDE THE FOLLOWING INFORMATION: 1- MODEL NUMBER OF THE PRODUCT. 2- PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST SHOWN ON ASSEMBLY INSTRUCTIONS. MOST PROBLEMS CAN BE SOLVED WITHOUT RETURNING THIS PRODUCT TO THE RETAILER. Note: If the EVA foams on the table top are missing, replace them with the EVA foams supplied in the hardware kit. See Illustration A. Step 2: Turn the table to its upright position. Then, carefully put the tiles (3) onto the table top (1). 1 A 3 Step 3: See Full Assembly. Note: To use an umbrella with this table, remove the plastic centre plug and put the umbrella pole through the table top. Cleaning and Maintenance • Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame parts. • Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your table. • When moving the table, remove the umbrella and lift. Do not drag this table. • We recommend the use of furniture covers when not in use. • In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected area during off-season periods. • The umbrella should be lowered and/or removed in windy conditions. Made in China