4IPNET WHG321 V3.30 Quick Installation Manual

WHG321 Secure WLAN Controller ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws and is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. All rights reserved. FCC Caution This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

WHG321 Secure WLAN Controller ENGLISH ① Package Contents 1. WHG321 x 1 2. Quick Installation Guide (QIG) x 1 3. Ethernet Cable x 1 4. RS-232 DB9 Console Cable x 1 5. Power Adaptor (12VDC, 2A) x 1 It is highly recommended to use all the supplies in the package instead of substituting any components by other suppliers to guarantee best performance. Preface This Quick Installation Guide provides instructions and reference material for getting started with the 4ipnet WHG321 Secure WLAN Controller. This guide will show you how to install WHG321 and get your network up and running with minimum configurations.

WHG321 Secure WLAN Controller ENGLISH ② System Overview Front Panel 1. Console: The system can be configured via a serial console port. The administrator can use a terminal emulation program such as Microsoft’s Hyper Terminal to login to the configuration console interface to change admin password or monitor system status, etc. 2. Reset Button: Press and hold the Reset button for over 3 seconds and status of LED on front panel will start to blink, release button at this stage to restarting the system. Press and hold the Reset button for more than 10 seconds and status of LED on the front panel will turn from blinking to off, release at this stage to reset the system to default configuration. 3. LED Displays: There are two LED light displays.  Power: Power LED lights up when power supply is on.  Status: Status LED blinks to indicate that system OS is booting up, when lit up constantly indicates that the system is ready for operation. 4. USB1 / USB2: Function reserved for future use. 5. WAN1 / WAN2: Two WAN port (10/100/1000 Base-T RJ-45) uplinks to the external network, such as the ADSL Router from your ISP (Internet Service Provider). 6. LAN1 ~ LAN2: Client machines or switch connect to WHG321 via LAN ports (10/100/1000 Base-T RJ-45). Rear Panel 1. Power Supply Socket: Connect the power adaptor to the power socket (Input: DC+12V).

WHG321 Secure WLAN Controller ENGLISH ③ Hardware Installation Please follow the following steps to install WHG321: 1. Connect the power to the power socket on the rear panel. 2. The Power LED should be on to indicate a proper connection. 3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on to indicate a proper connection. 4. Connect an Ethernet cable any LAN Port on the front panel. Connect the other end of the Ethernet cable to an administrator PC for configuring the WHG321 system, an AP for extending wireless coverage, a switch for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a proper connection.

WHG321 Secure WLAN Controller ENGLISH ④ Getting Started < System Concept > 4ipnet WHG321 is capable of managing user authentication, authorization and accounting. The user account information is stored in the local database or a specified external database server. Featured with user authentication and integrated with external payment gateway, WHG321 allows users to easily pay the fee and enjoy the Internet service using credit cards through Authorize.net, PayPal, SecurePay, or WorldPay. With centralized AP management feature, the administrator does not need to worry about how to manage multiple wireless access point devices. Furthermore, WHG321 introduces the concept of Service Zones - multiple virtual networks, each with its own definable access control profiles. This is very useful for hotspot owners seeking to provide different customers or staff with different levels of network services. The following diagram is an example of WHG321 set to manage the Internet and network access services centrally over different physical locations. < Web Management Interface > 4ipnet WHG321 supports web-based configuration. Upon the completion of hardware installation, WHG321 can be configured via web browsers with JavaScript enabled such as Internet Explorer version 9.0 and above or Firefox. 1. To access the web management interface, connect a PC to any LAN Port, and then launch a browser. Make sure you have set DHCP in TCP/IP of your PC to get an IP address automatically.

WHG321 Secure WLAN Controller ENGLISH ⑤ 2. Next, enter the gateway IP address of WHG321 at the address field. The default gateway IP address is“https://192.168.1.254” (“https” is used for a secured connection). 3. The administrator login page will appear. Enter “admin”, the default username, and “admin”, the default password, in the User Name and Password fields. Click Enter to log in.

WHG321 Secure WLAN Controller ENGLISH ⑥ 4. After a successful login, the system prompts for the administrator to change password to enforce system security. The password needs to be at least 6 characters long and include at least one alphabet and one number.

WHG321 Secure WLAN Controller ENGLISH ⑦ 5. After a successful login, a Welcome page will appear on the screen. If you can’t get the login screen, the reasons may be: (1) The PC is set incorrectly so that the PC can’t obtain the IP address automatically from the LAN port; (2) The IP address and the default gateway are not under the same network segment. Please use default IP address such as 192.168.1.xxx in your PC and then try it again. For the configuration on PC, please refer to WHG321 User’s Manual, “Network Configuration on PC & User Login”.

WHG321 Secure WLAN Controller ENGLISH ⑧ Common Settings < Setup Wizard > WHG321 provides a Setup Wizard for quick configuration. To quickly configure WHG321 by using the Setup Wizard, click on the Setup Wizard button on the top right corner to start the configuration process. Step 1: General  Select an appropriate time zone from the Time Zone drop-down list box to set up the system time.  Click Next to continue. Step 2: WAN1 Interface For setting up both wired WAN and wireless LAN functions:  Select a proper type of Internet connection for WAN1 interface from the following three available connections: Static, Dynamic, or PPPoE. Your ISP or network administrator can advise on the connection type available to you. Below depicts an example for Dynamic.  Click Next to continue. Step 3: Local User Account (Optional) New local accounts can be created and added into the database via this optional function. If local user accounts are not required, click Skip to go directly to Step 4. However, It is recommended to create at least one local user account in order to verify the system‘s readiness upon completion of this Setup Wizard.  Enter the Username (e.g. “testuser) and Password (e.g. “testuser”) to create a new local account.  Click Next to continue.  More local accounts can be added by clicking the Back button in Step 4.

WHG321 Secure WLAN Controller ENGLISH ⑨ Step 4: Confirm and Restart  Click Finish to save current settings and restart the system.  A confirmation dialog box will then appear. Click OK to continue.  A Confirm and Restart message will appear on the screen during the restarting process. Please do not interrupt the system until the Administrator Login Page appears.  Note: The system is trying to locate a DNS server at this stage. Therefore, a longer startup time is required if the configured DNS cannot be found.  When the following Administrator Login Page appears, it means the restart process is now completed. < User Login > To verify whether the configuration of the new local user account(s) created via the Setup Wizard has been completed successfully: 1. Connect a client device (e.g. laptop, PC) to any LAN Port of WHG321. The device will obtain an IP address automatically via DHCP. 2. Open a web browser on a client device, access any URL, and then the default User Login Page will appear. 3. Enter the Username and Password of a local

WHG321 Secure WLAN Controller ENGLISH ⑩ user account previously generated via Setup Wizard (e.g. “testuser@local” as the Username and “testuser” as the Password); then Click Login.  Note: 1. WHG321 supports multiple authentication options including built-in local user database and external authentication database (e.g. RADIUS). The system will automatically identify which authentication option is used from the full username entered. 2. The format of a full (valid) username is userid@postfix, where “userid” is the user ID and “postfix” is the name of the selected authentication option. 3. Exception: The postfix can be omitted only when the default authentication option is used. For example, “LOCAL” is the default authentication option at this system; therefore, you may enter either “testuser” or “testuser@local” in the Username field. Congratulations! The Login Success Page will appear after a client has successfully logged into WHG321 and has been authenticated by the system. The appearance of Login Success Page means that WHG321 has been installed and configured properly. < Service Zone & AP Management > 4ipnet WHG321 has introduced an important new concept called “Service Zone”. For how to set up Service Zones, please refer to the User’s Manual. WHG321 can centrally manage multiple access points (APs). For how to set up the “AP Management” feature, please refer to the “AP Management” section of the User’s Manual. For further configuration and information, please refer to the User’s Manual. P/N: V33020150209