Haws 3202 Installation, Operation & Maintenance Instructions

No. 2077328 (25) 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: [email protected]  website: www.hawsco.com Model 3202/3202G Drinking Fountain INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS LIMITED WARRANTY HAWS warrants that this specific product is guaranteed against defective material or poor workmanship for a period of one year from date of shipment. HAWS liability under this warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the Company upon inspection to be of defective material or not of first class workmanship, provided that claim is made in writing to Haws within a reasonable period after receipt of the product. Where claims for defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HAWS will not be liable for the cost of repairs, alterations or replacements, or for any expense connected therewith made by the owner or his agents, except upon written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages caused by defective materials or poor workmanship, except for replacements, as provided above. Buyer agrees that HAWS shall not be liable for general, special, or consequential damages claimed to arise under the contract of sale. The drinking fountain manufactured by HAWS is warranted to function if installation and maintenance instructions provided are adhered to. The units also must be used for the purpose for which they were intended. NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY HAWS. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL PLEASE CALL: TECHNICAL SUPPORT: 1-800-766-5612 FOR CUSTOMER SERVICE: 1-888-640-4297

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end wrench. LOCATION OF UNIT: The Model 3202/3202G Drinking Fountain is a wheelchair accessible drinking water facility. The height dimensions shown, meet current ADA requirements. When installing this unit, local, state or federal codes should be adhered to. If height other than shown is required, then dimensions must be adjusted accordingly. SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6 ATM) pressure. Where sediment or mineral content is a problem, an inlet filter is recommended. PLUMBING CONNECTIONS: Inlet is 1/4" IPS male fitting. MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual for more information. TROUBLESHOOTING PROBLEM REPAIR CHECKLIST 1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve is in wide-open position. b. Verify minimum 30 psi flowing supply pressure. c. Clean strainer. See 5874 Series Valve Manual. d. Adjust valve to increase flow. Use front adjust screw or see 5874 Series Valve Manual. General Notes: Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to ensure correct engagement with O-Ring. For more information about Haws products, see our website: www.hawsco.com © 2017 Haws® Corporation – All Rights Reserved HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. C R MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: [email protected] WEBSITE: WWW.HAWSCO.COM THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER. D.OLLOM 11-25-95 25 0002077328 3202/3202G . 1:4 1 1 FV 02/23/18 . GC 3 OF 4 PARTS BREAKDOWN 5265 2017 JP PARTS BREAKDOWN 4 REF ROTATED 90° INTO VIEW DETAIL A REMOVE INSERT WITH 5/16 HEX SOCKET (NOT SUPPLIED) 2 NOTES: 1 5874PB (ITEM 1) INCLUDES VRK5874 CARTRIDGE ASSEMBLY (ITEM 2) AND PBA7 RECESSED PUSH BUTTON (ITEM 3). 2 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE 222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO BUBBLER HEAD. RE-ATTACH TUBE TO VALVE. BUBBLER HEAD ASSEMBLY, PCP 3 DESCRIPTION ITEM 3202/3202G 5703M VRK5874 VALVE REPAIR KIT 5 6 PBA7 4 6250LF 2 0006983506 1 BUTTON ASSEMBLY, PUSH, 5874 BIB FAUCET (OPTIONAL) SPANNER WRENCH BUTTON, PUSH, RECESSED, PCP W/ VALVE 5874PB 1 1 1 3 (NOT SHOWN SEE DETAIL A)

LONG ANCHORS 4X SCREWDRIVER STOP (NOT SUPPLIED) TROUGH FLOW CORROSION PROTECTION. 178mm 7" MINIMUM 686mm 27" 33-1/2" 851mm AIR GAP PROVIDED FOR HEAVY DUTY ACCESS PANELS WITH VANDAL RESISTANT SCREWS. LOCAL GROUND CONDITIONS). FILL, MAY VARY DEPENDING UPON 30 CUBIC FEET MINIMUM POROUS DRAIN PIT IF DESIRED. RECOMMEND SEWER DRAIN (OR POROUS FILL SLOPE CONCRETE TO FLOOR TYPE TROUGH DRAIN (NOT SUPPLIED) FLOOR DRAIN 772mm 30-3/8" IMPORTANT: ATTENTION INSTALLER USE CARE TO AVOID KINKS WHEN ROUTING SUPPLY LINE TO VALVE AND FROM VALVE TO BUBBLER 254mm 10" MOUNTING DETAIL 7" 178mm PEDESTAL TEMPLATE MTG BOLTS 4X 1/2"-13 UNC 1/2" ANCHOR BOLTS MOUNTING HOLES FOR (SUPPLIED) IN CONCRETE SLAB 4X 1/2" IPS SUPPLY 191mm 7-1/2" BUBBLER TO BIB FAUCET STEEL FOUNTAIN 6250LF OPTIONAL HOSE BIB DETAIL 1/2" NPT INLET 1" 25mm (SUPPLIED). (BY OTHERS.) CONCRETE SLAB 30" SQUARE 38mm 1-1/2" (TO SPOUT OUTLET) 1 REFER TO 5874 SERIES OPERATION AND MAINTENANCE MANUAL FOR PUSH BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTIONS. NOTES: 1 6250LF BIB FAUCET OPTIONAL 1/2" NPT STOP, COMPRESSION TUBING (NOT SUPPLIED) FITTINGS, & 3/8" O.D. SCREWDRIVER (SUPPLIED) 1/2" TEE 1/2" NPT (OPTIONAL) 1/2" TUBING AND COMPRESSION FITTINGS (NOT SUPPLIED) APPROVED: DRAWN: PART NUMBER SCALE: SHEET OF REVISION DRAWING TYPE: SIZE: A BY: ECN NO. PAGE DATE: DATE: ECN: REVISED PER CHK'D.: C Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. R MODEL(S) 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: [email protected] WEBSITE: WWW.HAWSCO.COM THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. C. HAYES 11/91 25 0002077328.D 3202/3202G . 1:14 1 1 FV 02/23/18 . GC 4 OF 4 INSTALLATION 5265 2018 JP