IAdea XMP-300 Quick Start Manual

Box Contents Media Player Unit Documentation and software CD AC Power Adapter 12V DC output Audio Cable: 3.5 mm to 3.5 mm Audio Adapter Cable: RCA to 3.5 mm Quick Start Guide(s) Player Mounting Bracket The Adfotain Manager Express CD contains:  Software Installer (for Windows PC)  Software User’s Manual (PDF)  XMP-300 User’s Manual (PDF)  Quick Start Guide (PDF) Ethernet Cable Quick Start Guide A USB keyboard is required to change system settings. USB Keyboard required

Front View Rear View Note: “Reserved” I/O connections are provided for development use System Set-up 1 ATTACH a video cable (either VGA or HDMI) to your monitor. → When using VGA, your monitor must support XGA (1024x768) resolution or greater. For audio output, connect a stereo RCA cable from the XMP-300 to your monitor. → When using HDMI, both audio and video are sent over a single HDMI cable connection.

→ Immediately, the  green Power indicator on the main unit AND AC adapter lights up → 15 seconds later, the  amber Status indicator lights up. 3 SET your display to the correct input mode (RGB/VGA/HDMI) → You should see the player boot up screen 4 PLEASE WAIT while player boots up (up to 90 seconds). → Once you see “Open Standard Media Player” on screen, proceed to configure settings and update playback contents. Troubleshooting Tips 1 The front panel indicators do not light up when I plug in power.  Check if there is power coming through. A green indicator on the AC power adapter block lets you confirm if AC power is available. 2 The front panel indicators light up, but no video is displayed on screen.  Ensure that your video cable (VGA or HDMI) is securely connected. When using an HDMI connection, choose high quality, certified HDMI cables to avoid signal drop outs.  Check if your monitor is turned-on and switched to the corresponding video input source. 3 No sound is heard.  If using VGA connection, you also need to connect RCA audio cables.  Check volume (mute) settings on monitor. 

Configure settings PLUG IN a USB keyboard to the player’s rear port. → The player will enter the graphical menu system. Begin by setting the network (if using static IP) and time zone settings. → If you are connecting a VGA monitor connection or like to learn more about other settings, please refer to the XMP-300 User’s Manual (PDF file on CD) for a detailed overview. Update playback contents using a USB drive You can use either USB or network (see manual) methods to upload contents for playback on the media player. For a quick demo, you will need a USB drive and the included Documentation and Software CD: 1 Insert a USB drive into your PC’s USB port and format using FAT32 2 Load the Signage Manager Express CD into your PC’s CD or DVD drive 3 Locate the SMIL folder and copy the entire SMIL folder to the USB drive 4 With your system booted up from the previous System Set-up process, insert the USB drive when prompted by the on screen instructions 5 Device sync begins, and contents are transferred to the player 6 You can remove the USB drive once the sample contents begin to play SMIL syntax tutorials can be found at www.a-smil.org Scala Content Manager content management (Optional license required) This IAdea HD Media Appliance may be connected to a Scala Content Manager network with the purchase of a Scala software license. Contact Scala for licensing or learn more at IAdea.com. Next steps Please refer to the XMP-300 User’s Manual and the Software User’s Manual (PDF files on CD) for further instructions.