iLive IPC284S Operation & User’s Manual

Quickstart Guide For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215 Introduction- Power & Input Modes Using the ITB382 Sound Bar Connectivity- Bluetooth Connecting your sound bar wirelessly using Bluetooth Status Indicator Power Off No Light Optical Mode Amber Light Aux In Mode White light Line In Mode White Light Radio Mode Green Light Bluetooth Ready Flashing Blue Light Bluetooth Connected Blue Light 1. Power on the unit by pressing the Power button. 2. Press the Source button repeatedly to enter Bluetooth mode, indicated by a blue light. 3. Press the Pairing button on the side of the unit. The Pairing Indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 4. Using the native controls on your Bluetooth device, select the “ITB382” in your Bluetooth settings to pair. If your device requests a password, enter the default password “ 0 0 0 0 ”. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices. 5. When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will display a solid blue light. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps. ITB382B-573-02-QS.indd 1 3/20/2013 3:13:45 PM

Quickstart Guide For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215 Usability- The Learn feature Teach your sound bar to recognize commands from a single remote 1. With the power Off, press the Learn button on the unit. 2. Press the button you desire to be learned on the included remote. For example: Volume+ 3. Press the corresponding button on your remote. 4. Press the Learn button on the unit. 5. The programmed button on your remote will now be able to control your sound bar. What is the learning feature? The learning feature captures remote commands from your television remote, and teaches your bar speaker to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. Why use the learning feature? Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for remote codes, and improve the ease of operation. AUX/ LINE POWER SOURCE LEARN LINE IN PAIRING P L S VOLUME Sample Remote IT382B Remote POWER SOURCE LEARN LINE IN PAIRING P L S VOLUME ITB382B-573-02-QS.indd 2 3/20/2013 3:13:46 PM