Hobo U30/GSM Quick Start Manual
Text of the manual
HOBO® U30 Remote Communication
Quick Start Guide
Follow the steps in this Quick Start Guide to configure a HOBO U30
Station with Remote Communication.
U30/GSM, U30/Wi-Fi, U30/Ethernet
Step 2 - Register the HOBO U30 Station
Click the Register a Device link and follow the instructions on the screen. Give the
device a nickname, then enter both the serial numbe
NOTE: If you are not familiar with network configuration, consult with
your Network Administrator or IT Department.
Step 7 - Remove the USB cable from the U30 Station
Step 8 - Cycle power on the U30 Station (disconnect and reconnect the battery).
The U30 Station will connect to HOBOlink at the next Connection Interval.
Step 2 - Launch HOBO NetSetup.
Default
